PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Wind turbine acceleration sensor
Bently Nevada TP100 is a acceleration sensor. The accelerometer is listed as a sensor for wind-turbine condition monitoring with the 60M100 system. It supplies acceleration measurements for configured monitoring channels. The bare TP100 identity does not define a selected cable, mounting accessory or delivered approval, so these require separate confirmation.
The official accessory table identifies TurningPoint TP100, reference 323394, with 100 mV/g sensitivity and a 0.5-14000 Hz range. No cable length or approval suffix is specified in this record. Sensor operating limits not given by this table are not inferred.
The official accessory table identifies TurningPoint TP100, reference 323394, with 100 mV/g sensitivity and a 0.5-14000 Hz range. No cable length or approval suffix is specified in this record. Sensor operating limits not given by this table are not inferred.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where TP100 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for TP100
-
Product ModelTP100
-
Product ParametersWind turbine acceleration sensor
-
In stock8 units
-
ManufacturerBently Nevada
-
Transducer typeTurningPoint TP100 accelerometer
-
Sensitivity100 mV/g
-
Documented frequency range0.5-14000 Hz
-
Manufacturer catalog reference323394
-
Documented system application60M100 wind-turbine condition monitoring
View all additional
Alternative Names
TP100
TP100 acceleration sensor
Bently Nevada TP100
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
WIND TURBINE ACCELERATION SENSOR
Integrating TP100
The accelerometer is listed as a sensor for wind-turbine condition monitoring with the 60M100 system. It supplies acceleration measurements for configured monitoring channels. The bare TP100 identity does not define a selected cable, mounting accessory or delivered approval, so these require separate confirmation.
The 60M100 documentation lists TP100 for acceleration channels. Verify the actual transducer, input configuration and documented accessories. System supply voltage, channel count and network functions are monitor specifications and must not be assigned to this accelerometer.
Select the documented accelerometer cable and mounting arrangement, and configure the monitor for the actual sensitivity. Do not assign the monitor's DIN-rail mounting or electrical input ratings to the sensor. Obtain exact transducer installation limits before final application approval.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The TP100 acceleration sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of TP100 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The 60M100 documentation lists TP100 for acceleration channels. Verify the actual transducer, input configuration and documented accessories. System supply voltage, channel count and network functions are monitor specifications and must not be assigned to this accelerometer.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The TP100 acceleration sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the TP100 acceleration sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.4x2.3x2.1cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about TP100
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is TP100 identified?
The official accessory table identifies TurningPoint TP100, reference 323394, with 100 mV/g sensitivity and a 0.5-14000 Hz range. No cable length or approval suffix is specified in this record. Sensor operating limits not given by this table are not inferred. -
What is the function of this component?
The accelerometer is listed as a sensor for wind-turbine condition monitoring with the 60M100 system. It supplies acceleration measurements for configured monitoring channels. The bare TP100 identity does not define a selected cable, mounting accessory or delivered approval, so these require separate confirmation. -
Which installed equipment must be matched?
The 60M100 documentation lists TP100 for acceleration channels. Verify the actual transducer, input configuration and documented accessories. System supply voltage, channel count and network functions are monitor specifications and must not be assigned to this accelerometer. -
Where is this component used?
The manufacturer identifies main and generator bearings as monitoring targets. Correctly located and configured sensors supply the signals used to assess changing machine behaviour. -
What must be checked during installation?
Select the documented accelerometer cable and mounting arrangement, and configure the monitor for the actual sensitivity. Do not assign the monitor's DIN-rail mounting or electrical input ratings to the sensor. Obtain exact transducer installation limits before final application approval. -
Does the TP100 listing establish the specifications of every supplied accessory?
No. The manufacturer separately lists mounting studs and cable options. Match those components to the actual installation; none is confirmed by the bare TP100 model alone. -
Is TP100 itself a complete wind monitoring system?
No. It is the listed accelerometer. The complete installation needs the appropriate monitor, cables, mounting and software configuration.
READY TO VERIFY YOUR PART?
Get a TP100 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
