General Electric

CPU Module

UR9AH
Multilin's CPU Module
Control Processor Unit Module
24V DC / 48V DC / 110V DC

MICOGENI GENIUS INTERFACE BOARD

PLC MODULE
MICOGENI GENIUS INTERFACE BOARD
MARK V CONTROLLER
UNIT CONTROLLER
2000/VME BOARD

Central Processing Unit

CONTROL MODULE
RX3I CPU
1 GHZ PROCESSOR
2 SERIAL PORTS
RS-485 / RS-232
20 MB USER MEMORY

I/O Expansion Board

Power Supply:+5V DC via backplane
Power Consumption:3.5W typical
Input Voltage Range:±10V, 0-10V 
Input Current Range:0-20mA, 4-20mA 
Isolation :1500V AC channel
Accuracy:±0.05% of reading ±0.01% of range

Universal Analogue Input /Output Module

IS430SNUAH1A
Universal Analog Input/Output Module
GE Mark VIe, EX2100e,
Channels:8 universal channels
Resolution:16-bit 
Update Rate:10 ms per channel 
Power Supply:24V DC via PDM 
Power Consumption:6W typical, 8W maximum
Isolation :1500V AC channel

Universal Input-Output Module

Thermocouple
RTD
4-20 mA current input with HART option
5 V or 10 V input
0-20 mA current output with HART option
Digital inputs and outputs
Pulse accumulators

LAN Communications Card

TURBINE CONTROL SYSTEM
MARK V
SPEEDTRONICS
W/FIRMWARE
16 DIGIT DISPLAY

Discrete Output Pack

Input Voltage:24V DC (±10%)
Power Consumption:5W (max)
Output Channels:16 channels (sourcing)
Output Type:Solid-state (MOSFET)
Load Voltage:12-48V DC
Current per Channel:0.5A continuous (2A peak)
Isolation:1500V AC

Control board

Processor:32-bit DSP
Memory:2MB Flash, 512KB SRAM
Control Algorithms:PID with adaptive tuning
Sampling Rate:10kHz 
Analog Inputs:8 channels 
Digital I/O:24 channels
Encoder Interface:Differential RS-422

Circuit Board Card

Input Voltage:24V DC (typical)
Power Consumption:15W max
Isolation:1500V AC (channel-to-channel)
Signal Range:4-20mA, 0-10V, ±10V
Input Channels:16+ analog/digital
Output Channels:8+ analog/digita
Processing Speed:100MIPS (typical)

Elevator Control Board

Input Voltage:24V DC 
Operating Current:2A max
Isolation:2500V AC 
Relay Ratings:5A @ 30V DC / 250V AC
I/O Channels:16+ digital I/O

SAFETYNET CONTROLLER CARRIER

SAFETYNET CONTROLLER CARRIER 
WITH EARTH LEAK DETECTION
GE INTELLIGENT PLATFORMS
(PAC8000)

POWER SUPPLY MONITOR

POWER SUPPLY MONITOR
PAC8000 I/O
NODE SERVICES
12 V DC
30 MA

Reflective Memory PCI Node Card

PC BOARD
REFLECTIVE MEMORY
PCI NODE CARD
128 MBYTE MEMORY
MULTIMODE TRANSMISSION
Low Latency, Deterministic Transfer Rates
Operating System and Bus Structure Independence

Serial Modbus Communication I/O Module

Dual-port RS-232/RS-485 
Baud rates up to 115.2 kbps
Voltage Levels: ±5V to ±15V
Max Cable Length: 15m (50 ft)
Supply Voltage: 24V DC (±10%) 
Power Consumption: 3W typical

Wind Top Box A Module

Power Supply: 28 VDC
Communication Ports: Ethernet, Serial
Operating Temperature: -40°C to +70°C
Storage Temperature: -55°C to +85°C
Humidity: 5–95% non-condensing

High Capacity power supply

Series:90-30 PLC
Brand:GE Fanuc
Product Type:High-capacity power supply
Protocol Support:RS485 
Nominal Rated Voltage:24VDC / 48VDC
Input Voltage Range, DC:Start: 21 to 56 VDC Run: 18 to 56 VDC
Voltage:24 Volts DC
Standard:UL, CE
Full load power rating:50 Watts

VIBRATION MODULE

Velocity: 0–20 mm/s
Displacement: 0–500 µm 
Frequency Range:10 Hz – 10 kHz 
A/D Resolution:16-bit
Sampling Rate:Up to 50 kHz
Power Supply:24V DC 
Power Consumption:5W typical

I/O Protection Module

Accessory Boards:8 Boards
Ambient Temperature Rating:-30 to 65 Degrees Celsius
Base Circuitry Coating:Special Protection
Assembly Type:IS220 Standard Modular
Chassis Style:Rough Vented
Port Styles:2 Ethernet (Pictured)
Operating temperature: -30 to 65oC
Power Supply Voltage: 24 V dc

Rack Power Supply Module

Number of channels: 6
Input span: 4-20 mA
Termination resistors: 121 Ohm
Technology: Surface Mount
Common Mode Voltage Range: ±5 V
Maximum Lead Resistance: 15Ω
Analog output current: 0-20 mA
Operating temperature: -30 to 65 °C

Turbine I/O Module

Operating Voltage:24 VDC (±10%)
Power Consumption:12W (typical), 18W (max)
Isolation :1500 VAC (field-to-logic)
MPU Input Impedance:100 kΩ (differential)
Speed Resolution:1 RPM (0.0167 Hz)
Accuracy:±0.02% of reading 

Backup Protection I/O Module

Operating Voltage:24 VDC (±10%)
Power Consumption:10W (typical), 15W (max)
Isolation:1500 VAC (field-to-logic)
Backplane Current:5VDC: 1.2A max
Range: 0–250 mV / ±10V (software-selectable)
Resolution: 16-bit
Accuracy: ±0.1% FS

Flame Detector Power Supply

IS220PSFDH1A
POWER SUPPLY
335V
IO PACK

ARCNET Interface I/O Module

ARCNET INTERFACE MODULE
OPTIMIZED FOR MARK VI AND MARK VIE SYSTEMS
Voltage Range: 11–30 VDC (sinking)
Operating Voltage:24 VDC
Isolation:1500 VAC 

POWER METER

Operating Voltage:85–265V AC/DC
Nominal: 120/208V
Maximum: 690V AC 
Burden: <0.2VA per phase
Standard CTs: 1A or 5A
Burden: <0.1VA at 5A
Voltage/Current: ±0.2% of reading
Power/Energy: ±0.5% 
Frequency: ±0.01Hz