

























CONTROL COMMUNICATION GATEWAY
Power Supply: Typically 24V DC
Operating Temperature Range: Typically -40°C to +85°C
Storage Temperature Range: -40°C to +85°C.
Humidity: humidity up to 95% (non-condensing).
TB Option Card
the DC-300 drive
Operating Voltage 24V DC
Operating Temperature Range: -10°C to +60°C
Storage Temperature Range: -20°C to +70°C
CMOS MEMORY BOARD
PC BOARD ASSEMBLY
CMOS MEMORY BOARD
Memory Capacity: 128KB to 1MB
Operating Voltage:operates on +5V DC
Operating Temperature: 0°C to +60°C
Storage Temperature: Typically -40°C to +85°C.
Humidity: Generally 5% to 95% non-condensing
Terminal Board Relay Card
MCF/ POWER SUPPLY CARD
SPEEDTRONIC / MARK V
MOTOR FIELD CONTROL
Discrete input module
Input voltage 0 to +30VDC,+24VDC nominal
On state voltage +15 to +30VDC
Off state voltage 0 to +5VDC
Off state current 2.0 to 5.5mA0 to 0.5mA
Off response time 0.5ms maximum
Configurable filtertime0 ms, 1.0ms (default), or 7.0ms
Input impedance 10kOhms maximum
Extended Analog I/O board
Series Speedtronic Mark V
Part Number DS200TCQBG1B
Functional Description RST Extended Analog I/O Board
Functional Acronym TCQB
Used With TCQA Boards
Extended Analog I/O Board
Series: Mark V
Product Type: Analog I/O Board
Proximitor Inputs
LVDT/LVDR Inputs
Two Regulator Milliamp Outputs
LM Vibration Inputs
Safety Controller Board
UCSB CONTROLLER MODULE
256 MB DDR2 SDRAM
600 MHZ INTEL EP8059
28 VDC
Series: Mark VIe
Product Type: Controller Card
Microprocessor: Intel Pentium M Processor 1.6 GHz
Memory: 256 MB
Operating System: QNX Neutrino
Motor Management Relay
non-isolated RS232 port, RS485 port
<200 ms
2000 m (max)
-40°F (-40°C) to +140°F (+60°C)
1 A and 5 A secondary
INPUT MODULE
INPUT MODULE
32POINT
LOGIC
SERIES 90-30
POSITIVE/NEGATIVE
7 AMP MAX
24 VDC
Discrete Input module
Series:Series 90-30
Part Number:IC693MDL752
Product type:Digital I/O
Product Description:Discrete output module
Compatibility:GE Fanuc 90-30 PLCs
No of Channels:Thirty-Two (32)
Output points:32
No. of output groups:Four (4)
Output groups:4
Channels per group:Eight (8)
Maximum inrush current:4.6 A for 20 ms
Output connection:2 x 24-pin connectors
OUTPUT MODULE
Brand:GE Fanuc
Series:Series 90-30
Range:-10 to +10 Volts
Part Number:IC693ALG390
Product Description:Analog Voltage Output
No of Channels:2
External Supply Voltage Range:18 to 30 VDC
External Supply Voltage Ripple:10%
Isolation:1500 Volts RMS field to the logic side
Update Rate:5 ms all channels
Resolution:2.5 mV
Accuracy:+/- 5 mV at 25 degrees Celsius
Relay Output module
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693MDL930
Product Description:Discrete output module
Product type:Digital I/O
Relay outputs:8
Product Description:Relay Output module
Output switching capacity:4 Amps
5 to 30 volts DC 5 to 250 volts AC, 50/60 Hz
No of Channels:Eight (8)
Minimum load:10 mA
Maximum inrush current:5 Amperes
Response time:15 ms
OUTPUT MODULE
OUTPUT MODULE
12/24 VDC
POSITIVE LOGIC
32 POINTS
INTERFACE USES FUJITSU CONNECTOR
printed circuit board
IS200WETAH1ABR2
DISCONTINUED BY MANUFACTURER
printed circuit board
CPU module
Product type CPU module
Compatibility GE Fanuc 90-70 PLCs
RAM 1 MB
NV-RAM 256 KB
Microprocessor 80486DX4
Clock speed 96 megahertz
INPUT MODULE
Series:VersaMax
Part Number:IC200ALG620
Description:Analog input module
Product Description:4-point RTD / Resistance input module
Resolution:16 bits
Update Rate:210 milliseconds
Compatible RTD Wiring type:3-wire and 4-wire RTDs
Bus Voltage:5 Volts DC
Resistance input range:0-500 Ohms; 0-3000 Ohms
Isolation (Input to Frame):1500 Volts AC
Digital Resolution:15 bits plus sign
Isolation (Input to Logic):250 Volts AC
Frequency:50-60 Hertz
Temperature:0-60 degrees Celsius
Maximum lead resistance:5 ohms per lead
Analog Input Thermocouple Module
Thermocouple types J, K, T, S, R, none (used for mV inputs)
Spans (+/–) 19.5mV, 39mV, 78.125mV, 156.25mV, 312.5mV,625mV
Converter resolution 15 bits + sign
Conformity error +/–0.3 degree Celsius, +/–0.5 degree Fahrenheit.
Normal mode rejection 60dB, at 50/60 Hz, 100% span
Common mode rejection 120 dB at 50/60Hz, 100 ohm imbalance
Common mode voltage 3 VDC maximum
Analog Output module
No. of channels: 4 single-ended, one group
Voltage Range: 18 - 30 VDC
Current Range: 4 - 20 mA
Update Rate: 0.3 ms
LED Indicators: FLD PWR, OK
Power Consumption: 50 mA from +5V bus
Converter Control Board
Converter Control Board
6U SINGLE SLOT VME SINGLE BOARD COMPUTER (SBC)
INTEL ULTRA LOW VOLTAGE CELERON PROCESSOR AT 400 MHZ OR 650 MHZ
Embedded Single Board
Up to 512MB PC100 SDRAM
(PC133 stepped down to 100 MHz)
Built-in SVGA support with 4 Mbytes DRAM display cache
Built-in dual 10/100 Mbit Ethernet
IDE drive support
Floppy drive support
Two RS232 serial ports
Dual USB ports
Real-Time clock/calendar
Front panel reset switch
Miniature speaker
Keyboard/Mouse port

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.