PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC693MDL740G Sixteen-point positive-logic DC output module, G revision
GE IC693MDL740G is a Sixteen-point positive-logic DC output module, G revision in the GE 90-30 Series PLC range. The GE document identifies base catalog IC693MDL740; confirm the IC693MDL740G suffix on the installed label and any revision-specific release note. Discrete output points: 16, two groups of 8. Output logic: Positive / sourcing. Nominal voltage: 12/24 V DC.
The manufacturer's document records its interface and service limits. Output voltage range: 12–24 V DC (+20%, −15%). Current per output point: 0.5 A maximum. Before installation, compare the complete catalog code, installed connections and controller configuration.
The manufacturer's document records its interface and service limits. Output voltage range: 12–24 V DC (+20%, −15%). Current per output point: 0.5 A maximum. Before installation, compare the complete catalog code, installed connections and controller configuration.
BEFORE YOU BUY
Confirm the complete sixteen-point positive-logic dc output module, g revision
ACTUAL APPLICATIONS
Application context for IC693MDL740G
IC693MDL740G supports the documented GE 90-30 Series PLC role in the three industry areas below. The complete model suffix and installed configuration determine the applicable engineering setup.
-
01 · PULP & PAPER
Paper Converting and Finishing
Pulp and Paper ManufacturingTissue and Packaging Paper -
02 · MARINE & OFFSHORE
Ship Repair and Harbor Utilities
Shipbuilding and Repair IndustriesHarbor and Coastal Services -
03 · DISTRICT ENERGY
District Heat Distribution Operations
District Heat SupplyMunicipal Thermal Services
Technical specifications for IC693MDL740G
-
Product ModelIC693MDL740G
-
Product ParametersSixteen-point positive-logic DC output module, G revision
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Discrete output points16, two groups of 8
-
Output logicPositive / sourcing
-
Nominal voltage12/24 V DC
-
Output voltage range12–24 V DC (+20%, −15%)
-
Current per output point0.5 A maximum
-
Current per common2 A maximum
-
Field-to-logic isolation1500 V
-
Group-to-group isolation500 V
-
Inrush current4.78 A for 10 ms
-
Maximum output drop1 V
-
Maximum off-state leakage1 mA
-
On response2 ms maximum
-
Off response2 ms maximum
-
Backplane 5 V draw110 mA, all outputs on
-
Internal output fusesNone
View all additional
Alternative Names
IC693MDL740G
GE 90-30 Series PLC Sixteen-point positive-logic DC output module, G revision
IC693MDL740 Sixteen-point positive-logic DC output module, G revision
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC693MDL740G sixteen-point positive-logic dc output module, g revision
The manufacturer source documents IC693MDL740 for GE 90-30 Series PLC. The GE document identifies base catalog IC693MDL740; confirm the IC693MDL740G suffix on the installed label and any revision-specific release note. It describes discrete output points as 16, two groups of 8. Match the controller assembly, slot or network identity and available power before connection.
Use the documented interface and connection arrangement. Output logic is Positive / sourcing; nominal voltage is 12/24 V DC. Check all field conductors, configuration and external supply against the installed project.
At startup, review power and status indications, test every affected channel, port or function in sequence, then record the verified settings and exact installed revision for future maintenance.
Features:
- 16 sourcing outputs
- Two groups of eight
- 12/24 V DC supply
The IC693MDL740G sixteen-point positive-logic dc output module, g revision requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC693MDL740G sixteen-point positive-logic dc output module, g revision
Verify the full IC693MDL740G marking, including its suffix, before removing the installed unit. A base manual for IC693MDL740 must be read with any applicable revision information and the current hardware configuration.
Preserve the project and photograph wiring, connector assignments, slot position and indicators. Compare the replacement's discrete output points (16, two groups of 8) and output logic (Positive / sourcing) with the service record.
After the change, restore the approved setup, confirm controller recognition and test affected signals or communications. Record the final nameplate and validation results.
Features:
- 0.5 A per point
- 16 sourcing outputs
- 12/24 V DC supply
The IC693MDL740G sixteen-point positive-logic dc output module, g revision requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC693MDL740G sixteen-point positive-logic dc output module, g revision must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.6 × 13 × 13.5 cm
-
Shipping weight0.30 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC693MDL740G
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should IC693MDL740G be checked before ordering?
Compare the full catalog and suffix with the installed label, GE 90-30 Series PLC assembly and manufacturer document. -
Can another revision of IC693MDL740 replace IC693MDL740G?
Do not infer interchangeability from the shared base number. Check applicable release notes, firmware and project compatibility. -
What should engineers record before exchanging IC693MDL740G?
Save the approved project and record the slot, full nameplate, connector or terminal assignments, supply and current diagnostics. -
How should IC693MDL740G be tested after installation?
Confirm controller recognition and status, exercise each affected function with a known condition, and archive the measured outcome. -
Which manual covers IC693MDL740G?
The linked manufacturer document covers base article IC693MDL740. Verify the particular IC693MDL740G suffix against the delivered module. -
What does a distributor need to quote IC693MDL740G?
Send the complete order code, quantity, condition, delivery country and a legible label photo if revision matching is critical. -
How should incoming IC693MDL740G be inspected?
Compare the full label and condition against the quotation; inspect contacts, housing and included accessories before installation. -
What should be checked if IC693MDL740G is not recognized?
Confirm the correct slot or network position, supply, bus or firmware compatibility and project configuration before replacing other hardware.
READY TO VERIFY YOUR PART?
Get a IC693MDL740G quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC693MDL740GSixteen-point positive-logic DC output module, G revisionManufacturer: General ElectricView Details
-
-
IC200ALG240-KEEight-channel isolated analog input moduleManufacturer: General ElectricView Details
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
