AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for IC697MDL654
-
Product ModelIC697MDL654
-
Product ParametersDISCRETE INPUT MODULE
-
Tariff Code8537101190
-
Country of originXiamen, China
-
Place of shipmentUSA
-
Estimated Shipping Size4x22x29.3cm
-
ManufacturerGeneral Electric
-
Weight0.56 kg
-
Rated Voltage48 volts DC
-
Inputs per Module32
-
Isolation1500 volts RMS – any input tobackplane
-
Input Voltage Range-3 to +56 volts DC
-
Input Current4.7mA (typical) at rated voltag
-
Input Impedance9.12K ohms, typical
-
On-state Voltage33 volts to 56 volts
-
Off-state Voltage0 to 10 volts
-
On-state Current4mA to 7mA
-
Off-state Current0 to 1.5mA
Description
IC697MDL654
DISCRETE INPUT MODULE
SERIES 90-70
48VDC
POSITIVE/NEGATIVE LOGIC
32-POINT
FOUR ISOLATED GROUPS OF 8 POINTS EACH
POSITIVE/NEGATIVE LOGIC COMPATIBILITY
PROXIMITY SWITCH COMPATIBLE
DISCRETE INPUT MODULE
SERIES 90-70
48VDC
POSITIVE/NEGATIVE LOGIC
32-POINT
FOUR ISOLATED GROUPS OF 8 POINTS EACH
POSITIVE/NEGATIVE LOGIC COMPATIBILITY
PROXIMITY SWITCH COMPATIBLE
Revisions
Revision Part #
Also known as
Information
Overview
Manuals
Technical notes
Product Applications
Removing an I/O Module
Features:
- 32 Points – Four isolated groups of 8 points each
- Positive/Negative Logic Compatibility
- Proximity switch compatible
- Input filter selectable – 1 ms or 10 ms
- First input configurable as interrupt
The 48 Volt DC Positive/Negative Input Module provides32 input points in four isolated groups of eight pointseach. The input current–voltage characteristics meet IECstandard (type 1) specifications.LED indicators that show the ON–OFF status of eachpoint on the logic (PLC) side of the circuit are located atthe top of the module. The input circuitry provides sufficient current to ensurereliable operation of the switching device. Input currentis typically 4.7mA in the ON state. An input in the OFFstate can accept up to 1.5mA leakage current withoutturning on.
The IC697MDL654 GE Discrete Input Module may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
GE IC697MDL654 Discrete Input Module Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
3–wire proximity switches are easily applied, since theyprovide low voltage drop in the ON state and low leakagecurrent in the OFF State.2–wire proximity switches derive their power from thesignal connections; thus both the ON state voltage and theOFF state leakage current are higher than for 3–wiredevices. This module is compatible with many 2–wiredevices; however each device type must be carefullyevaluated for compatibility in both the ON and OFF states.To determine compatibility with a specific proximityswitch, find the ON state characteristics of the switch inthe diagram shown below. If that point falls to the left ofthe input load line, the ON state characteristics arecompatible. As an example, the ON state requirements ofa compatible proximity switch of 3mA at 5 volts drop areshown below. OFF state compatibility is assured if theproximity switch leakage is less than 1.5mA with a moduleinput voltage of 10 volts or less
- Automotive Paint Shops:Manages painting/curing lines; failure would ruin expensive bodies
- Power Plants & Substations:SIL-3 certified main controller for turbines & grid switching
- Pulp and Paper Mills:1MB memory for high-speed processing of thousands of I/O points
- Chemical & Oil Refineries:Triple modular redundancy for ESD & F&G detection
- Food & Beverage Facilities:Batch mixing & pasteurization with regulatory data logging
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
The instructions below should be followed whenremoving an I/O module from its slot in a rack. Grasp the board firmly at the top and bottom of theboard cover with your thumbs on the front of thecover and your fingers on the plastic clips on theback of the cover. Squeeze the rack clips on the back of the cover withyour fingers to disengage the clip from the rack railand pull the board firmly to remove it from thebackplane connector. Slide the board along the card guide and remove itfrom the rack.
FAQs
-
What is the IC697MDL654 module used for?+It is a 24 VDC input module specifically designed for the GE Fanuc Series 90-70 Programmable Logic Controller (PLC) system.
-
What types of input signals does IC697CGR935 accept?+This module is designed to accept a 24VDC input signal.
-
What do the LED indicators show?+The LEDs at the top of the module indicate the ON/OFF status of each input point from the logic (PLC) side of the circuit.
-
What is the purpose of the mechanical key?+Each module includes a mechanical key that hooks below the connector. This ensures that only the correct module type can be inserted into that specific slot once keyed.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN