PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE VersaMax
- IC200ALG260G
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC200ALG260G VersaMax eight-channel analog input module
GE IC200ALG260G is a VersaMax analog input module with eight single-ended channels for voltage or current measurement. Carrier jumpers select voltage or current operation and bipolar or unipolar voltage mode.
The module uses 12-bit conversion, draws its operating power from the VersaMax backplane and reports loss of internal field power. Input range selection, carrier terminals and channel scaling must agree with the installed configuration.
The module uses 12-bit conversion, draws its operating power from the VersaMax backplane and reports loss of internal field power. Input range selection, carrier terminals and channel scaling must agree with the installed configuration.
BEFORE YOU BUY
Confirm the complete VersaMax eight-channel analog input module
ACTUAL APPLICATIONS
Application fields for IC200ALG260G
Three broad application areas relevant to IC200ALG260G are expanded below with two concise fields under each heading.
-
01 · PROCESS MANUFACTURING
Batch and Continuous Process Production
Batch formulation and processing productionContinuous process and materials production -
02 · WATER TREATMENT
Municipal and Industrial Water Treatment
Municipal drinking-water and wastewater treatmentIndustrial process-water and environmental treatment -
03 · POWER GENERATION
Thermal, Hydroelectric and Renewable Power
Thermal and hydroelectric power productionRenewable generation and energy integration
Technical specifications for IC200ALG260G
-
Product ModelIC200ALG260G
-
Product ParametersVersaMax eight-channel analog input module
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Module designationIC200ALG260
-
Analog inputs8 single-ended channels
-
Voltage ranges±10 V or 0 to 10 V
-
Current range4 to 20 mA
-
Resolution12 bit
-
Backplane current130 mA maximum at 5 V
-
Update rate0.4 ms per module
-
Filter response5 ms
-
Isolation250 V AC continuous to logic and frame
-
DiagnosticsLoss of internal power
View all additional
Alternative Names
IC200ALG260G
General Electric IC200ALG260G
VersaMax VersaMax eight-channel analog input module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC200ALG260G within the documented VersaMax configuration
Install IC200ALG260G only in a compatible VersaMax configuration. Confirm module designation (IC200ALG260) and analog inputs (8 single-ended channels) before connection.
Record the installed slot, terminal allocation, connector orientation, field wiring and every configured address or range. Preserve shielding, protective-earth and supply arrangements from the approved documentation.
After installation, restore the controlled project or parameter set. Review diagnostics and prove every affected input, output, drive function or communication path before returning the application to service.
Features:
- Exact IC200ALG260G identity
- Verified VersaMax compatibility
- Controlled configuration and functional testing
IC200ALG260G requires the documented electrical, mechanical and configuration conditions before energising the installation.
INTERCHANGEABILITY
Verify IC200ALG260G before replacement
Match the full IC200ALG260G order code. Similar family names or physical outlines do not confirm interchangeability with this VersaMax eight-channel analog input module.
Compare the documented voltage ranges (±10 V or 0 to 10 V) and current range (4 to 20 mA) with the installed article. Record firmware, hardware revision and removable media where applicable.
Back up the approved program or parameters, label all connections and retain the original configuration record. After replacement, inspect diagnostics and complete controlled functional tests before release to operation.
Features:
- Complete article and revision identity
- Recorded wiring, settings and installed configuration
- Post-installation diagnostics and functional test
Replacement of IC200ALG260G requires verification against the installed hardware, project and manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for IC200ALG260G
- Applicable General Electric documentation
- Directory links by subcategory and brand
Documentation for IC200ALG260G must match the complete installed product identity and approved configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size11 × 5.5 × 6.5 cm
-
Net weight0.14 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC200ALG260G
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented function of IC200ALG260G?
IC200ALG260G is a VersaMax eight-channel analog input module for the VersaMax platform. -
Which complete identity should be used when ordering IC200ALG260G?
Use the full IC200ALG260G marking, including every suffix, and match it to the installed label and documentation. -
Which primary rating should engineers verify for IC200ALG260G?
Verify module designation (IC200ALG260) and analog inputs (8 single-ended channels) against the installed configuration. -
Can a similar VersaMax item directly replace IC200ALG260G?
Not by family name alone. Confirm interfaces, electrical ratings, firmware or hardware revision, terminal assignment and project compatibility. -
What should maintenance record before removing IC200ALG260G?
Record the full label, installed position, wiring, connector orientation, configuration, status indications and diagnostic state. -
Which checks are required after installing IC200ALG260G?
Complete controlled power-up, diagnostic review and functional verification of every affected signal or communication path. -
What should a distributor request for a IC200ALG260G quotation?
Request the full model, quantity, clear nameplate photographs, destination, required delivery date and any installed revision information. -
What should an MRO buyer confirm in the supplied scope for IC200ALG260G?
Confirm the exact article identity, condition, included accessories, documentation, lead time and warranty before accepting the quotation.
READY TO VERIFY YOUR PART?
Get a IC200ALG260G quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IC200ALG260GVersaMax eight-channel analog input moduleManufacturer: General ElectricView Details
-
IC695CRU320-ELRedundant RX3i controllerManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
