









SC Switch Module
Safety Standard Compliance
IEC 61508 SIL3, ISO 13849-1
and other industrial safety standards
Communication Protocols
Modbus TCP, Profibus, EtherCAT,
CANopen, and other protocols
Operating Voltage 24 VDC
Power Consumption Typically <20 W
Operating Temperature Range -10°C to +60°C
Storage Temperature Range -40°C to +85°C
Node Address Jumper
Product No. : 51153818-202
Product Type : Node Address Jumper
The node address jumper is used to give the processors in
the RUSIO-3224 or RUSLS-3224 module(s)
the node address of the IOTA
Gray plastic jumper set
Has a (two digit) number that is clearly visible
Jumper Kit
Type of Jumper
Electrical jumper connections
for various industrial applications
Operating Temperature Range
Typically from -20°C to +70°C
Storage Temperature Range -40°C to +85°C
Humidity 5% to 95% non-condensing
I/O Chassis for non-redundant I/O modules
IOCHAS-0001S is a chassis
for up to 18 non-redundant IO module
Approvals: CE, UL, CSA, TUV, FM
5V-R: 35 mA (IO-0001 slot 21)
Controller I/O Termination Assembly
Typically 24V DC or 12V DC
Output Type Source
Load Voltage 15 30 VDC Maximum
On-State Voltage 24 V (typ), load current @ 0.5A
Off-State Leak Current 5.0 µA (max)
Turn-On/Turn-Off Time 10 ms (max)
FTA interconnection cable
Direct connection between two
FS-CP series process controllers
10 meters long
Shielded twisted pair design
Easy to install and use
Hot-pluggable
Analog Output Module
Output Type 4-20 mA
Output Channels 16
Output Ripple < 100 mV
peak-to-peak at power line frequency
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal.
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Directly Settable Output Current Range 0 mA, 2.9 mA to 21.1 mA
Maximum Output Compliant Voltage 16 V

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.