
Cable, Battery RAM charger, 30 in
51202330300
DISCONTINUED BY MANUFACTURER
CABLE SET
FOR BATTERY RAM CHARGER
Control Processor Module
TCPRR021
DISCONTINUED BY MANUFACTURER
REDUNDANCY MODULE
90 MA
24 VDC
TO SUPPORT C200 REDUNDANCY
2 CHASSIS SLOTS USED
(51309288-275)
Four Channel Control Card Catalytic Input
Power Consumption: 12.8W 8.5W
Drive: Constant Current.
Initial Accuracy: ±1%.
Electronic in 1mA stepsfrom 90 to 315mA.
Maximum Drive Voltage: 10V
Protected against short circuit and open circuit.
40 ohms (including sensor) at 200mA.
Full Scale Signal Range: 15mV to 300mV
±100mV from centre at 2V bridge voltage.
Adjustment: Electronic adjustment
of bridge balance and signal gain.
Open circuit. Short circuit single bead failure.
DC Input Card
Input Voltage Range: 12V DC to 48V DC
Input Channels 8 to 16 isolated input channels
Low State: ≤ 5V DC
High State: ≥ 10V DC
Operating Temperature: -10°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing
I/O MODULE
TKIOLI01
I/O MODULE
I/O LIM
24 VDC
Product type : Direct Control Systems
IOLIM (IIOLIM (/O Link Module)
Interface for PMIO
For complete information