PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
T9882 dual termination for analogue output field connections
T9882 is the AADvance dual termination assembly for analogue output field wiring. It provides eight field connections and supports two compatible output modules. The selected module type determines the number of active output channels available to the installation.
The manufacturer documents a channel isolation withstand test for the termination assembly. Actual field-loop isolation also depends on the external wiring: sharing a power supply between channels or modules removes loop isolation in the arrangement described by the build manual.
The manufacturer documents a channel isolation withstand test for the termination assembly. Actual field-loop isolation also depends on the external wiring: sharing a power supply between channels or modules removes loop isolation in the arrangement described by the build manual.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T9882 Fits Across Industrial Production Fields
Used in oil, chemical and power operations where the installed equipment and approved controller configuration are compatible.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Transportation Facilities
Offshore production platforms and onshore facilities processing crude oil.Natural gas processing plants and pipelines transporting petroleum products. -
02 · CHEMICAL PROCESSING
Chemical Manufacturing, Batch Processing and Industrial Formulation Facilities
Continuous production facilities manufacturing bulk chemicals and industrial materials.Batch production areas handling chemical blending and product formulation. -
03 · POWER GENERATION
Gas Turbine Generation and Combined Cycle Power Stations
Natural gas turbine generators supplying electricity to utility networks.Combined cycle power stations integrating gas and steam generation.
Technical specifications for T9882
-
Product ModelT9882
-
Product ParametersDual Analogue Output Termination Assembly
-
ManufacturerICS Triplex
-
Field connections8
-
Module arrangementDual
-
Supported output modulesTwo T9481 or T9482 modules; active channels depend on module type
-
Channel isolation withstand+/-1.5 kV DC for 1 minute; not a continuous operating voltage
-
Maximum conductor cross section1.31 mm2 (16 AWG)
-
Wire stripping length6 mm
-
Mounting baseT9300 I/O base
-
Terminal-screw tightening0.5 Nm minimum; follow the complete OEM procedure
-
Unpacked assembly dimensions132 mm high x 84 mm wide
-
Bare assembly mass260 g; not gross shipping weight
View all additional
Alternative Names
AADvance T9882 analogue output TA
ICS Triplex T9882 output termination
T9882 dual analogue terminal assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
AADVANCE EQUIPMENT
Match T9882 to the documented AADvance configuration
T9882 terminates field circuits for a dual analogue output arrangement on the documented T9300 base. Match the selected T9481 or T9482 modules and their available channel population.
The manufacturer gives separate examples for devices powered from the installation supply and devices powered locally. Current-loop polarity and the complete supply arrangement must follow the appropriate original circuit.
Channel withstand testing does not guarantee isolated field loops with every power arrangement. A shared 24 V supply between channels or modules removes loop isolation in the documented circuit.
Features:
- Dual analogue module population
- Field supply and polarity verification
- Installation-dependent field-loop isolation
The ICS Triplex T9882 dual analogue output termination assembly requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match T9882, the installed module types and the approved dual configuration. A matching connector or similar termination appearance is not enough to establish equivalence.
Record field power, circuit polarity and channel labels before removal. Inspect the base, retainers, coding and terminal condition under the approved site isolation procedure.
After installation, verify wiring and power arrangements before controlled output and diagnostic testing. Confirm the defined process release conditions before returning equipment to service.
Features:
- Match exact termination identity
- Record field loops before removal
- Test the intended output configuration
The ICS Triplex T9882 dual analogue output termination assembly requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T9882 dual analogue output termination assembly must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T9882
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is T9882?
It is the dual AADvance termination assembly for analogue output field wiring, with eight field connections and support for two compatible output modules. -
Does it always provide eight active output channels?
No. Eight describes the termination field connections. The T9481 module has three output channels and T9482 has eight, so the installed module configuration determines active channel availability. -
Is T9882 itself an analogue output converter?
No. It is the termination assembly. Output current accuracy, resolution, diagnostics and communication behavior belong to the selected output module and its configuration. -
What does the isolation value mean?
The manufacturer gives a channel isolation withstand value of plus or minus 1.5 kV DC for one minute. This test value is not a continuous operating voltage. -
Can sharing field power affect isolation?
Yes. The build manual states that sharing the 24 V supply between channels or modules means the field loops are not isolated from each other. Verify the complete approved circuit. -
Where can the original wiring drawings be found?
The manufacturer build manual documents system-powered and field-powered devices and the T9882 terminal arrangement. Use those drawings and the controlled project design before connecting field circuits. -
Are the output modules included?
Only if they are expressly listed in the quotation. The documented 260 g mass is the bare termination assembly, not the shipping-package weight.
READY TO VERIFY YOUR PART?
Get a T9882 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
