PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
4329 Network communication module for the Tricon safety instrumented system
Triconex 4329 is a Network communication module used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 4329
Manufacturer documentation places the Network Communication Module in practical safety applications. The three cases below describe different operating tasks in which 4329 performs its documented product-family role with the configured companion equipment.
- 01 · CHEMICAL & PETROCHEMICAL
Govern toxic-feed isolation during loss of containment indication
Across the feed measurements and emergency valves, 4329 operates in its approved product-family role as a Network Communication Module. During loss of containment indication, the system uses this function to isolate the hazardous feed through the defined outputs, helping it limit further hazardous inventory. - 02 · OIL & GAS
Balance pipeline isolation with Network Communication
For the coordinated operation of the line-pressure inputs and sectionalizing valves, 4329 supports the configured automation role as a Network Communication Module. During confirmed line event, the system uses this function to isolate the affected transfer section, helping it contain the event within the intended section. - 03 · POWER GENERATION
Align fuel-gas isolation during confirmed fuel-system trip
In the automation chain for the gas-pressure signals and double-block valves, 4329 supports the configured automation role as a Network Communication Module. During confirmed fuel-system trip, the system uses this function to close the documented isolation path, helping it stop fuel flow to the protected equipment.
Technical specifications for 4329
-
Product Model4329
-
Product ParametersNetwork communication module
-
In stock1 unit
-
ManufacturerInvensys
-
Component TypeNetwork communication module
-
Order Reference4329
-
System PlatformTriconex safety control system
-
Primary FunctionConnects Tricon to Ethernet hosts
-
Channel or Port CapacityTwo network ports
-
Electrical ClassificationIEEE 802.3 Ethernet
-
Compatible HardwareTricon controllers and external hosts
-
Mounting ArrangementTricon communication slot
-
Connection InterfaceNetwork and TriBus interfaces
-
Diagnostic CoveragePASS-FAULT-ACTIVE-NET status
-
Documented VariantModel 4329 NCM
-
Operating Environment0 to 60 °C controller service
-
Storage Environment−40 to 75 °C equipment storage
-
Relative Humidity5 to 95% non-condensing
-
Commissioning RequirementVerify every affected safety path
View all additional
Alternative Names
4329
Triconex 4329
Invensys 4329
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match 4329 to the installed Triconex configuration
Triconex 4329 is a Network communication module for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: 4329
- Product class: Network communication module
- Model-specific values listed in the specifications
The Triconex 4329 requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex 4329 only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete 4329 identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex 4329 requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete 4329 identity, installed system and applicable revision.Features:
- Model-specific data sheet prepared for 4329
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex 4329 must match the installed system and revision; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size49 × 45.3 × 6.8 cm
- Shipping weight3 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8538900000
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 4329
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which drawing defines primary function for ethernet host communication?
Primary Function is Connects Tricon to Ethernet hosts. Compare the approved drawing with the complete nameplate. -
How is channel or port capacity verified during ethernet host communication?
Channel or Port Capacity is Two network ports. Record the measured result in the maintenance file. -
What must match Tricon controllers and external hosts before ethernet host communication?
Compatible Hardware is Tricon controllers and external hosts. Confirm all mating hardware before connection. -
Why must connection interface be inspected for ethernet host communication?
Connection Interface is Network and TriBus interfaces. Preserve connector keying, labels and physical condition. -
Which indication confirms diagnostic coverage during ethernet host communication?
Diagnostic Coverage is PASS-FAULT-ACTIVE-NET status. Resolve every active fault before release. -
How is Model 4329 NCM identified for replacement?
Documented Variant is Model 4329 NCM. Do not infer equivalence from appearance alone. -
What operating limit applies to ethernet host communication?
Operating Environment is 0 to 60 °C controller service. Maintain the cabinet within manufacturer limits. -
Which final test releases ethernet host communication to service?
Commissioning Requirement is Verify every affected safety path. Test every affected path under the site procedure.
READY TO VERIFY YOUR PART?
Get a 4329 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
