Siemens SINAMICS

Replacement IPD card

SINAMICS S150 
Replacement IPD card 
for air-cooled Motor Module 
basic unit 380-480V
110kW

Replacement IPD card

SINAMICS S120 
Replacement IPD card 
for air-cooled Motor Module 
500-690V, 710kW

Replacement IPD card

SINAMICS S120 
Replacement IPD card 
for air-cooled Basic Line Module 
560kW 500-690V 
3AC/680A

Replacement IPD card

SINAMICS S120 
Replacement IPD card 
for air-cooled Basic Line Module 
560kW 500-690V 
3AC/680A

Precharging module

Precharging module 
PCU2 für 
Designs G and H  
3 AC 380-575V
50/60 Hz

G120 Standard Control Unit

SINAMICS G120 CONTROL UNIT 
CU240E-2 E-TYPE SAFETY INTEGRATED 
STO RS485-INTERFACE
USS-PROTOCOL 6DI, 3DO, 2AI, 2AO
MAX 1F-DI PTC/KTY INTERFACE 
USB- AND SD/MMC-INTERFACE 
PROTECTION IP20 
AMBIENT TEMP 0 TO +50 DEG C 
WITHOUT POWER MODULE AND PANEL

Driver Board

HV-IGBT modules: 1900A
Input Voltage Range:+24V DC
Isolation Voltage:min. 4000 V RMS
IGBT Voltage Monitoring:±5%
Gate Drivers Per Phase:2 channels 

Current Transformer

CURRENT TRANSFORMER
2000 AMP
15-24VDC
AC Input Range: 0–2000 A AC
Overload Capacity: 130% of Ipn for 10 sec
DC Voltage or Current:4–20 mA (Two-Wire Loop) 
Input Voltage: 15–24 V DC ±10%
Power Consumption: <2 W

BUSBAR CURRENT TRANSFORMER

Primary Current (Ipn): Range 50–600 A
Secondary Current (Isn):1 A or 5 A
Frequency: 50/60 Hz
Insulation Voltage:720 V AC
Operating: -25°C to +60°C
Storage: -40°C to +70°C

PSB11-BOARD

PSB11-BOARD/R3 SIC
HP/MC - SINAMICS COMPONENTS (LD)
Link Voltage (DC): Supports 600/510–720 V D
Output Voltage (AC): Up to 480 V AC 3-phase
Continuous Motor Current: Up to 1,600 A
Peak Current: Short-term 2,500 A
Switching Freq: Up to 5–20 kHz

Normalizing module

Normalizing module 
ABO For devices 
DC 510-620V
690A

Normalizing module

Normalizing module 
ABO For devices 3 AC 
380-460V and 510-620V DC
315 A

DOUBLE MOTOR MODULE

SINAMICS S120 DOUBLE MOTOR MODULE 
INPUT: DC 600V 
OUTPUT: 3AC 400V, 3A/3A 
FRAME SIZE: BOOKSIZE D-TYPE 
INTERNAL AIR COOLING OPTIMIZED PULSE SAMPLE 
AND SUPPORT OF THE EXTENDED SAFETY 
INTEGRATED FUNCTIONS 
INCL. DRIVE-CLIQ CABLE

CPU BOARD

CPU BOARD ELECTRONIC MODULE 
FOR CONVERTER
RAM ≤ 256 MB 
Flash ≤ 512 MB
Digital I/O:24 VDC, ±10%
Analog Inputs: 0–10 V/4–20 mA
Input Voltage: 24 VDC ±10%
Isolation: Reinforced (3000 VAC) 
Max Power Draw: 20–50 W

REPLACEMENT IPD CARD

SINAMICS S120 
Replacement IPD card 
for air-cooled Basic Line Module 
710kW 380-480V 3AC/1500A

Interface Module

SIMATIC ET 200SP
PROFIBUS bundle IM
IM 155-6DP HF, max
32 I/O modules and 16 ET 200AL modules
Multi-hotswap
bundle consists of: Interface module (6ES7155-6BU01-0CN0)
Server module (6ES7193-6PA00-0AA0)
PROFIBUS connector (6ES7972-0BB70-0XA0)

SINAMICS S120 CONTROL UNIT

SINAMICS S120 
CONTROL UNIT CU310-2 PN 
WITH PROFINET INTERFACE 
WITHOUT COMPACTFLASH CARD

CompactFlash card

SINAMICS S120 
CompactFlash card 
incl. performance expansion 
V4.8

Adapter Cable

SINAMICS S120 
C/D Type Adapter Cable 
FOR MOTOR CONNECTION
2,5MM2 FOR MOTOR MODULES 3-18A

GH180 Power cell

SINAMICS PERFECT HARMONY 
GH180 Power cell 200 A GenIV
Power supply unit SL10 230 V 
AC/48V DC Pulse

Smart Line Module

SINAMICS S120 
Smart Line Module 
380-480V 3AC, 50/60 Hz
Output: 510-650 V DC, 1300 A 
Rated power: 630kW Built-in unit 
IP00 Internal air cooling 
incl. Drive-CLiQ cable

CompactFlash card

SINAMICS S120 
CompactFlash card 
incl. performance expansion 
V5.2 Service Pack 3

Replacement power block

SINAMICS Replacement power block 
for 380-480V 3AC, 50/60 Hz
1700A Smart Line Module
rectifier Painted modules 
and nickel-plated busbars

Replacement power block

SINAMICS Replacement power block 
for 380-480V 3AC, 50/60 Hz
1300 A Smart Line Module 
rectifier Painted modules 
and nickel-plated busbars

Power Stack Adapter

SINAMICS S120 Drive System
Voltage Support:510–720 V DC
Maximum Resolution: 16-bit digital I/O handling
Operating Temperature: 0°C to +55°C 
Compatible SINAMICS S120 Modules

Smart Line Module

SINAMICS S120 
Smart Line Module 
380-480V 3AC, 50/60 Hz 
Output: 510-650 V DC, 
1700A Rated power: 800kW 
Built-in unit IP00 Internal air cooling 
incl. Drive-CLiQ cable

SERIES PRESSURE SWITCH

PRESSURE SWITCH 
0-50BAR FOR AIR-COOLED 
SINAMICS FOR AIR-COOLED 
SINAMICS GM150(IGBT)
Adjustable Threshold Range: 0–50 bar
Switch Type: SPDT
Max Voltage: 250 VAC/24 VDC
Current Rating: 6 A resistive load
Operating Temperature: –25°C to +60°C

SINGLE MOTOR MODULE

SINAMICS S120 
SINGLE MOTOR MODULE 
INPUT: DC 600V 
OUTPUT: 3-PH 400V, 3A 
FRAME SIZE: BOOKSIZE D-TYPE INTERNAL 
AIR COOLING OPTIMIZED PULSE SAMPLE AND 
SUPPORT OF THE EXTENDED 
SAFETY INTEGRATED FUNCTIONS 
INCL. DRIVE-CLIQ CABLE

Thyristor Trigger Board

Input Voltage:24 VDC (±10%)
Isolation: ≥2500 VAC opto-isolation 
Synchronization: Matched to 3-phase AC supply
Operating Temperature: 0°C to +55°C
Relative Humidity: Max. 95% (non-condensing)

POWER SUPPLY UNIT

POWER SUPPLY
6SL3985-5HX01-0AA0,
6SL39855HX010AA0,1.25A
240V

STANDARD MODULE

Normalizing module 
ABO For devices 
DC 890-930V, 650A
Nominal: 890–930 V DC
Rated Current: 650 A
Braking Power Dissipation: 400–500 kW

synchronous servo motor

SIMOTICS S 
synchronous servo motor 
1FT6 27 Nm, 100K, 2000 rpm naturally cooled
IP65 IM B5 (IM V1, IM V3) 
incremental encoder sin/cos 
1 VSS 2048 S/R (encoder I-2048) 
for power/signal connectors: 
Outlet direction axial DE without holding brake

BRAKING UNIT

BRAKING UNIT
MASTERDIRVES
16 AMP
510/650 VDC
20 KW
673/757 VAC
20 OHM

INVERTER WIRING BOARD

SNUBBER MODULE
UPPER UNIT
MASTERDRIVES INVERTER WIRING BOARD
SMU1

CONTROL UNIT

SINAMICS G120 CONTROL UNIT 
CU250S-2 DPINTEGRIERT PROFIBUS 
SUPPORT OF VECTORCONTROL
EASY POSITIONING EPOS VIAEXTENDED 
FUNCTION LICENSE 4 CONFIGURABLEDI/DO
6 DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI
2 AOSAFETY INTEGRATED STO, SBC
SS1 FURTHERSAFETY FUNCTIONS VIA EXTENDED 
SAFETYLICENSE ENCODER: D-CLIQ + HTL/TTL/SSI
RESOLVER/HTL VIA TERMINAL PROTECTION 
IP20USB- AND SD/MMC-INTERFACE

BLM power module

AC Line Supply: 3-phase 380–480 V AC
DC Output: 520–650 V DC
Rated Current:18–30 A
Output Power: 15–110 kW
Efficiency: ≥97%
Storage temperature: -25°C to +70°C
Humidity: ≤85% non-condensing

Power supply module

SPARE PART-POWER SUPPLY
INDUSTRIAL
100-240VAC/150W
REV. K8
CV4
CV5
IPC627B/C
IPC827B/C
HMI IPC677B/C
HMI IPC577C

POWER CONTACTOR

contactor AC-1, 140 A, 690 V 
40 °C, 3-pole, 480 V AC, 60 Hz
auxiliary contacts: 2 NO + 2 NC
main circuit: ring cable lug connection, 
control and auxiliary circuit: screw terminal
size: S3

COMMUNICATION MODULE

COMMUNICATION MODULE
CBC
FOR CAN-BUS COMMS
SPARE PART
SIMOVERT MASTERDRIVES
Isolation: up to 500 V
Supply Voltage: Pulls 24 V DC
Process Data (PZD): 4–6 PZD 
Temperature: 0°C – +55°C

TDB MODULE PC BOARD

TDB MODULE PC BOARD
690VAC
FOR CONVERTER MODULE
3-phase AC Voltage: 690 V AC(±10%)
Frequency Tolerance: ±5%
Isolation Voltage: 2000 V AC
Operating Temperature:-25°C to +55°C

DRIVE BOARD

Logic Power Supply: 24 V DC
Analog Inputs:0–10 V, 4–20 mA
Switching Frequency:2–16 kHz
Temperature: -10°C to +50°C
Humidity: ≤85% (non-condensing)

DRIVE-CLIQ HUB MODULE

SINAMICS DRIVE-CLIQ 
HUB MODULE 
CABINET DMC20 
WITHOUT DRIVE-CLIQ CABLE

Power supply module

SIMOVERT Master drives 
Power supply module 
PSU1 For devices with 
Designs E through H 3 AC 
380-460, 660-690V, 50/60 Hz 
and 510-620V DC
890-930 V DC

Inverter IGD trigger board

Input Voltage: 24 V DC
Voltage Range: +15 V to -10 V
Current Capacity: 5–10 A
Switching Frequency: Up to 20 kHz
Galvanic Isolation Voltage: ≥2500 V AC
Operating Temperature: -20°C to +55°C
Storage Temperature: -40°C to +85°C

Inverter drive board

Control Voltage: 24 V DC
Signal Voltage: 5 V/3.3 V
Switching Frequency:12–16 kHz
Current Ratings:55–160 kW
Overload Capacity: Typically 150%
Temperature: –10°C to +40°C
Humidity: ≤90% (non-condensing)

Inverter drive board IGD trigger board

Trigger Voltage/Current:+15 V/-10 V
Switching Frequency: Up to 20 kHz
Isolation Voltage: ≥2000 V AC
Logic Supply: +24 V DC (±10%)
Gate Driver Supply: ±15 V DC
Operating Temperature: 0–55°C

DRIVE BOARD

Power Supply (Control Section): 24 V DC (±20%)
DC Link Voltage Handling:500–800 V DC
Motor Compatibility: up to 100s of kW
Switching Frequency:  2–16 kHz
Digital Inputs/Outputs:≥6 DI/DO
Analog Inputs:≥2 × ±10 V, 4–20 mA
Operating Temperature: 0–45°C

POWER ENTRY CONTROL MODULE

Voltage Range: 3-phase AC input
Frequency: 50/60 Hz (±5%)
DC Link voltage:510–720 V DC
Continuous Current (DC Link): Up to 60–80 A
Auxiliary Voltage Supply: 24 V DC 
Aambient Temperature: 0–40°C

G120L Inverter Motherboard

Supply Voltage: 24 V DC (±20%)
Power Consumption: ≤15 W
Motor Compatibility: up to 55 kW
Standard Communication:PROFIBUS DP
Operating Temperature: -20°C to +60°C.
Relative Humidity: ≤95% (non-condensing)

Inverter Power Board

Voltage Range:380–480 V AC
Frequency: 50/60 Hz ±5%
Rated Current:20–200 A
Continuous Power: 10–150 kW
Operating Temperature: -10°C to +50°C (storage up to +70°C)