PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E00296878
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E00296878 Isolation driver board
Siemens A5E00296878 is a Isolation driver board used in the SINAMICS power electronics. It provides isolated measurement and gate-drive functions and must be matched to the documented electrical class, installed section and connector arrangement.
Before replacement, verify the complete article number, board revision, 24 V DC control input, 1900 A module class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
Before replacement, verify the complete article number, board revision, 24 V DC control input, 1900 A module class, mating hardware, grounding and site procedure. Commission the affected drive function only after completing the specified checks.
BEFORE YOU BUY
Confirm the complete Isolation driver board
ACTUAL APPLICATIONS
A5E00296878
Isolation Driver Board applications
Three documented service scenarios for A5E00296878; verify the exact Siemens configuration, interfaces and controlled procedures before work.
-
01 · HIGH-CURRENT ISOLATION
Isolate the
1900 A gate stageUse the driver board only with the documented high-current power-module arrangement. Confirm the complete A5E00296878 marking, isolation interface and controlled semiconductor channels before handling the installed power block. -
02 · VOLTAGE FEEDBACK
Measure the
IGBT voltage feedbackReconnect sensing conductors with the original polarity, routing and clearance from gate circuits. Compare the board feedback with a traceable measurement while the converter remains in a protected commissioning state. -
03 · DUAL GATE TEST
Test both
isolated gate channelsApply the approved auxiliary supply and compare command, gate and feedback timing for both channels. Verify isolation, symmetry and diagnostic response before allowing the 1900 A power stage to carry load.
Technical specifications for A5E00296878
-
Product ModelA5E00296878
-
Product ParametersIsolation driver board
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIsolation driver board
-
Drive FamilySINAMICS power electronics
-
Primary FunctionProvides isolated measurement and gate-drive functions
-
Power ArchitectureHigh-voltage IGBT interface
-
Voltage Class24 V DC control input
-
Current Rating1900 A module class
-
Power SectionPower-block interface
-
Mechanical DesignIsolated driver board
-
Electrical InterfaceTwo gate channels and voltage feedback
-
Commissioning CheckTest isolation and both gate channels
View all additional
Alternative Names
A5E00296878
SINAMICS power electronics Isolation driver board
Siemens Isolation driver board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E00296878 to the installed SINAMICS power electronics
Siemens A5E00296878 is an Isolation driver board used in the SINAMICS power electronics to provide isolated measurement and gate-drive functions. Its high-voltage igbt interface role must match the documented drive configuration, section assignment and controlled hardware arrangement.
Before integration, confirm 24 V DC control input, 1900 A module class, the power-block interface, isolated driver board and two gate channels and voltage feedback. Compare the complete article and connector orientation with the installed equipment and Siemens documentation.
Use qualified drive-service personnel, apply the site lockout procedure, observe the specified discharge time and use ESD protection. Complete test isolation and both gate channels, then review diagnostics and the affected machine function before returning the system to service.
Features:
- Identity: A5E00296878
- Function: Provides isolated measurement and gate-drive functions
- Family: SINAMICS power electronics
The Siemens A5E00296878 requires documented system integration and a recorded functional test before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E00296878 identity before exchange
Treat A5E00296878 as a configuration-specific Isolation driver board for the SINAMICS power electronics. Match the complete Siemens article number, installed power-block interface, board or module revision, mechanical design and approved replacement record before removal.
Photograph two gate channels and voltage feedback, connector keying, cable labels, shielding, protective earth, adjacent assemblies and the installed section position. Preserve the documented isolated driver board and any cooling or discharge provisions while the drive is isolated.
After installation, test isolation and both gate channels. Restore only the approved parameters and interfaces, review Siemens diagnostics, test the affected power or control path at a controlled operating point, and retain the article identity and test results in the maintenance record.
Features:
- Exact article: A5E00296878
- Installed section: Power-block interface
- Release check: Test isolation and both gate channels
The Siemens A5E00296878 requires documented replacement verification and a recorded functional test before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for A5E00296878
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E00296878 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size21.6 × 12.1 × 6.6 cm
-
Shipping weight0.58 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E00296878
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What operating role does the 1900 A isolation driver perform?
In A5E00296878, the documented role is to provides isolated measurement and gate-drive functions within the SINAMICS power electronics; confirm the complete nameplate and power-block interface before ordering. -
Does the 1900 A isolation driver match the documented voltage requirement?
For A5E00296878, compare 24 V DC control input with the converter nameplate, power architecture and controlled Siemens documentation. -
Which two gate channels and voltage feedback details identify the 1900 A isolation driver?
Before removing A5E00296878, capture connector keys, adjacent assemblies, cable routing, grounding points and the board revision. -
How is the 1900 A module class rating of the 1900 A isolation driver verified?
Use the installed converter rating and Siemens documentation; visual similarity to another board is insufficient for A5E00296878. -
What isolation procedure applies to the 1900 A isolation driver power architecture?
Isolate every energy source, observe the Siemens discharge time, prove absence of voltage and apply the site lockout procedure before handling A5E00296878. -
What should be inspected on the 1900 A isolation driver at receipt?
Inspect the A5E00296878 label, coating, connectors, bent pins, contamination, transport damage and supplied protective packing. -
Which commissioning result releases the 1900 A isolation driver to service?
For A5E00296878: Test isolation and both gate channels. Also record insulation checks, drive diagnostics, functional results and the final hardware revision before release. -
Which site records confirm the 1900 A isolation driver configuration?
Send the A5E00296878 nameplate, installed converter type, power-block interface photos, quantity, fault symptoms and delivery destination.
READY TO VERIFY YOUR PART?
Get a A5E00296878 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
