PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E36228241
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A5E36228241 Inverter power control board
Siemens A5E36228241 is a Inverter power control board in the SINAMICS converter repair parts. It is used to control the connected motor or drive function within the configured machine.
Its documented configuration includes component class of Inverter power control board, drive family of SINAMICS converter repair parts, primary function of Controls variable-frequency power stage, and power architecture of PWM inverter control electronics. During operation, the Inverter power control board processes the configured drive commands and regulates the connected motor or power section.
Its documented configuration includes component class of Inverter power control board, drive family of SINAMICS converter repair parts, primary function of Controls variable-frequency power stage, and power architecture of PWM inverter control electronics. During operation, the Inverter power control board processes the configured drive commands and regulates the connected motor or power section.
BEFORE YOU BUY
Confirm the complete Inverter power control board
ACTUAL APPLICATIONS
Where A5E36228241 Fits Across Major Industry Sectors
Uses span plastics, pharmaceuticals and wood, subject to verified compatibility, operating conditions and project requirements.
-
01 · PLASTICS & RUBBER
Plastic Products Manufacturing and Rubber Material Processing
Plastic material production through extrusion, calendering and film processing.Rubber material preparation and molding for manufactured rubber products. -
02 · PHARMACEUTICAL MANUFACTURING
Pharmaceutical Batch Production and Continuous Medicine Manufacturing
Batch pharmaceutical manufacturing for commercial medicine and healthcare markets.Continuous pharmaceutical processing for industrial medicine and ingredient production. -
03 · WOOD PROCESSING
Solid Wood Processing and Industrial Panel Manufacturing
Solid wood processing and machining for commercial timber production.Wood panel processing and finishing for manufactured wood products.
Technical specifications for A5E36228241
-
Product ModelA5E36228241
-
Product ParametersInverter power control board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassInverter power control board
-
Drive FamilySINAMICS converter repair parts
-
Primary FunctionControls variable-frequency power stage
-
Power ArchitecturePWM inverter control electronics
-
Voltage Class380–480 V AC
-
Current Rating20–200 A application range
-
Control SupplyInternal regulated control power
-
Power SectionInverter power section
-
Mechanical DesignCompact printed-circuit board
-
Electrical InterfaceGate and monitoring connectors
-
Cooling Integration−10 to +50 °C operation
-
Board DesignationA5E36228241 power board
-
Service Role10–150 kW converter spare
-
Product StatusSiemens repair component
-
Commissioning CheckVerify frequency and phase current
View all additional
Alternative Names
A5E36228241
SINAMICS converter repair parts Inverter power control board
Siemens Inverter power control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E36228241 to the installed SINAMICS converter repair parts
Siemens A5E36228241 is a Inverter power control board used in the SINAMICS converter repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E36228241
- Product class: Inverter power control board
- Family: SINAMICS converter repair parts
The Siemens A5E36228241 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E36228241 identity before exchange
Replace A5E36228241 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E36228241 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E36228241 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E36228241
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E36228241 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size21.4 × 11 × 2 cm
-
Shipping weight0.14 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E36228241
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function makes the 150 kW inverter power board model-specific?
The 150 kW inverter power board is used in the documented SINAMICS converter repair parts configuration for controls variable-frequency power stage. -
Why is 380–480 V · 20–200 A checked before exchange for the 150 kW inverter power board?
For the 150 kW inverter power board, match 380–480 V AC and 20–200 A application range to the installed equipment nameplate. -
Which power architecture is involved for the 150 kW inverter power board?
The 150 kW inverter power board performs controls variable-frequency power stage through the pwm inverter control electronics. -
What must match the A5E36228241 board designation for the 150 kW inverter power board?
For the 150 kW inverter power board, record A5E36228241 power board together with the complete article and installed revision. -
How is damage at gate and monitoring connectors detected for the 150 kW inverter power board?
On the 150 kW inverter power board, inspect gate and monitoring connectors for keying, damage, contamination, routing and secure seating. -
Which internal regulated control power condition is measured first for the 150 kW inverter power board?
Before energizing the 150 kW inverter power board, measure internal regulated control power and confirm the documented polarity or phase condition. -
What prevents an incorrect replacement for the 150 kW inverter power board?
A 150 kW inverter power board replacement must match its electrical class, section role, companion hardware and mechanical interface. -
How is normal operation confirmed for the 150 kW inverter power board?
For the 150 kW inverter power board, verify frequency and phase current; then record diagnostics and the controlled functional-test result.
READY TO VERIFY YOUR PART?
Get a A5E36228241 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
