PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens SINAMICS
- A5E36717793
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Siemens A5E36717793 is a IGD3 R2 power block board for the SINAMICS power block repair parts. The exact article number defines its electrical class, section role and installed interface.
Verify the complete nameplate, voltage rating, current class, mating hardware, cooling arrangement and drive documentation before replacement. Commission the repaired power path under the approved site procedure.
Verify the complete nameplate, voltage rating, current class, mating hardware, cooling arrangement and drive documentation before replacement. Commission the repaired power path under the approved site procedure.
ACTUAL APPLICATIONS
Application context for A5E36717793
Manufacturer documentation places the Igd3 R2 Power Block Board in practical drive applications. The three cases below describe different operating tasks in which A5E36717793 performs its documented product-family role with the configured companion equipment.
-
01 · OIL & GAS
Govern pipeline-pump speed with Igd3 R2 process control
In the automation chain for the mainline pump motors and pressure-control loops, A5E36717793 operates in its approved product-family role as a Igd3 R2 Power Block Board. During throughput change, the system uses this function to change motor speed with the commanded line flow, helping it maintain controlled pipeline pressure. -
02 · AUTOMOTIVE
Route robotic joining with Igd3 R2 process control
For the coordinated operation of the robots, fixtures and clamp groups, A5E36717793 performs its assigned control role as a Igd3 R2 Power Block Board. During station restart, the system uses this function to confirm tooling readiness before the cycle starts, helping it prevent an incomplete joining cycle. -
03 · PULP & PAPER
Protect dryer-section control with Igd3 R2 process control
At the control layer of the steam groups and dryer drives, A5E36717793 serves its documented function as a Igd3 R2 Power Block Board. During moisture correction, the system uses this function to align thermal and drive response with the running sheet, helping it support the target moisture profile.
Technical specifications for A5E36717793
-
Product ModelA5E36717793
-
Product ParametersIGD3 R2 power block board
-
In stock1 unit
-
ManufacturerSiemens
-
Component ClassIGD3/R2 power block board
-
Drive FamilySINAMICS repair components
-
Primary FunctionControls high-power semiconductor stage
-
Power ArchitectureIGD3/R2 gate-drive architecture
-
Voltage Class690 V AC / 1080 V DC class
-
Current Rating410 A class
-
Line FrequencyDrive-dependent switching
-
Power SectionPower block control section
-
Mechanical DesignTIM board assembly
-
Electrical InterfaceInternal gate and power interfaces
-
Cooling IntegrationMounted on cooled power block
-
Board ProtectionRepair-grade board assembly
-
Busbar TreatmentPower-block internal conductors
-
Service ClassificationSiemens repair part
-
Commissioning CheckConfirm current marking on nameplate
View all additional
Alternative Names
A5E36717793
SINAMICS power block repair parts IGD3 R2 power block board
Siemens IGD3 R2 power block board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DRIVE SYSTEM INTEGRATION
Match A5E36717793 to the installed SINAMICS power block repair parts
Siemens A5E36717793 is a IGD3 R2 power block board used in the SINAMICS power block repair parts.
Confirm voltage class, current rating, section position, interfaces and cooling arrangement before integration.
Use qualified drive-service personnel and follow the applicable Siemens safety, discharge and commissioning procedure.
Features:
- Exact product identity: A5E36717793
- Product class: IGD3 R2 power block board
- Family: SINAMICS power block repair parts
The Siemens A5E36717793 requires documented system integration before energising the drive.
REPLACEMENT CONTROL
Verify the complete A5E36717793 identity before exchange
Replace A5E36717793 only after matching the full article number, voltage class, module section and connector arrangement.
Photograph every busbar, plug, gate lead, cooling connection and protective-earth point before removal.
After installation, inspect clearances and insulation, restore power in the Siemens sequence and test the affected drive function.
Features:
- Match exact A5E36717793 identity
- Confirm power-section and phase position
- Complete insulation and functional tests
The Siemens A5E36717793 requires documented replacement verification before energising the drive.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for A5E36717793
- Installation checks matched to the drive section
- Exact article identity required before service
Documentation for Siemens A5E36717793 must match the installed drive, power section and revision; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85049090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A5E36717793
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What function does the 410 A IGD3/R2 board perform?
In A5E36717793, it performs controls high-power semiconductor stage within the documented SINAMICS power block repair parts configuration. -
Which electrical rating applies to the 410 A IGD3/R2 board?
For A5E36717793, verify 690 V AC / 1080 V DC class and 410 A class against the installed power section. -
How should the Power block control section be recorded for the 410 A IGD3/R2 board?
Before removing A5E36717793, photograph the exact section position, labels and adjacent assemblies. -
Which connection checks matter for the 410 A IGD3/R2 board?
Inspect Internal gate and power interfaces on A5E36717793 for orientation, contact condition, clearance and correct seating. -
How is cooling preserved for the 410 A IGD3/R2 board?
For A5E36717793, preserve the documented thermal path, seals, airflow or coolant arrangement: Mounted on cooled power block. -
Can the 410 A IGD3/R2 board replace a similar Siemens component?
Match the full A5E36717793 article number, section role, board designation and mechanical interface; appearance is insufficient. -
Which test releases the 410 A IGD3/R2 board to service?
For A5E36717793: Confirm current marking on nameplate. Then verify insulation, diagnostics and the affected drive function. -
What quotation details identify the 410 A IGD3/R2 board?
Provide the A5E36717793 nameplate, installed Power block control section, Internal gate and power interfaces, quantity, photographs and destination.
READY TO VERIFY YOUR PART?
Get a A5E36717793 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
