PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200PA SMART
- 6ES7650-8EK80-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7650-8EK80-0AA0 Digital Process Output Module
Siemens 6ES7650-8EK80-0AA0 is the standard DO 32x24VDC/0.5A output module for SIMATIC ET 200PA SMART. It switches compatible process loads within the configured distributed automation station.
The thirty-two outputs are arranged in groups of eight and use a forty-pin front connector. Channel current, aggregate group loading and switching response determine the permitted loads. This standard 0AA0 execution must not be treated as the coated 1AA0 variant.
The thirty-two outputs are arranged in groups of eight and use a forty-pin front connector. Channel current, aggregate group loading and switching response determine the permitted loads. This standard 0AA0 execution must not be treated as the coated 1AA0 variant.
BEFORE YOU BUY
Confirm the complete digital process output module
ACTUAL APPLICATIONS
Application context for 6ES7650-8EK80-0AA0
6ES7650-8EK80-0AA0 is a digital process output module for SIMATIC ET 200PA SMART DO 32. It supports compatible automation projects in chemical processing, power generation, pharmaceutical production. Suitability depends on the configured system, connected interfaces and documented operating limits.
-
01 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Automation
Chemical Production Process AutomationPetrochemical Processing and Production -
02 · POWER GENERATION
Power Generation and Industrial Energy
Electric Power Generation ControlIndustrial Cogeneration Process Automation -
03 · PHARMACEUTICAL PRODUCTION
Pharmaceutical Production and Batch Processing
Pharmaceutical Batch Process ControlFormulation Production and Processing
Technical specifications for 6ES7650-8EK80-0AA0
-
Product Model6ES7650-8EK80-0AA0
-
Product ParametersDigital Process Output Module
-
In stock7 units
-
ManufacturerSiemens
-
Output channel allocation32 digital outputs in groups of eight
-
Rated output voltage24 V DC
-
Rated channel current0.5 A
-
Group loading limits4 A at 40 ℃; 3 A at 60 ℃ horizontal; 2 A at 40 ℃ vertical
-
Maximum output cable distances1000 m shielded; 600 m unshielded
-
Permitted circuit potential difference75 V DC / 60 V AC
-
Isolation test voltage500 V AC / 707 V DC
-
Maximum backplane current60 mA
-
Maximum no-load supply current100 mA
-
Typical power loss9.3 W
-
High-state output voltageL+ minus 1.3 V
-
Permitted channel load range5 mA–0.6 A
-
Maximum off-state leakage0.5 mA
-
Output response times200 µs on; 300 µs off
-
Front connector contacts40 pins
View all additional
Alternative Names
6ES7650-8EK80-0AA0
SIMATIC ET 200PA SMART DO 32 Digital Process Output Module
ET 200PA SMART DO 32 32 digital outputs in groups of eight output channel allocation
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7650-8EK80-0AA0 digital process output module
Integrate 6ES7650-8EK80-0AA0 only in the documented SIMATIC ET 200PA SMART DO 32 configuration. Match the installed interfaces and the engineered application before selecting this digital process output module.
The thirty-two outputs are arranged in groups of eight and use a forty-pin front connector. Channel current, aggregate group loading and switching response determine the permitted loads. This standard 0AA0 execution must not be treated as the coated 1AA0 variant.
Use the applicable controlled instructions for SIMATIC ET 200PA SMART DO 32. Validate the assigned signals, communication or output behaviour and retain the accepted configuration for 6ES7650-8EK80-0AA0.
Features:
- Output channel allocation: 32 digital outputs in groups of eight
- Rated output voltage: 24 V DC
- Rated channel current: 0.5 A
The 6ES7650-8EK80-0AA0 digital process output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7650-8EK80-0AA0 digital process output module
Confirm the complete 6ES7650-8EK80-0AA0 identity and installed SIMATIC ET 200PA SMART DO 32 execution before replacement. Compare the connector arrangement and the technical values required by the existing project.
Record the digital process output module connections, project settings and associated accessories. Preserve the accepted configuration and isolate the affected circuits before exchange.
After fitting 6ES7650-8EK80-0AA0, restore the verified configuration and test every affected function. Retain the identification, diagnostic results and final acceptance record for the SIMATIC ET 200PA SMART DO 32 equipment.
Features:
- Output channel allocation: 32 digital outputs in groups of eight
- Rated output voltage: 24 V DC
- Rated channel current: 0.5 A
The 6ES7650-8EK80-0AA0 digital process output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7650-8EK80-0AA0 digital process output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4 × 12.5 × 12cm
-
Shipping weight0.30kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7650-8EK80-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How are the thirty-two PA SMART outputs grouped?
For 6ES7650-8EK80-0AA0, the documented output channel allocation is 32 digital outputs in groups of eight. Compare this limit with the installed SIMATIC ET 200PA SMART DO 32 configuration. -
What is the rated PA SMART output voltage?
For 6ES7650-8EK80-0AA0, the documented rated output voltage is 24 V DC. Compare this limit with the installed SIMATIC ET 200PA SMART DO 32 configuration. -
What continuous channel current is specified?
For 6ES7650-8EK80-0AA0, the documented rated channel current is 0.5 A. Compare this limit with the installed SIMATIC ET 200PA SMART DO 32 configuration. -
How does temperature change the PA SMART group limit?
For 6ES7650-8EK80-0AA0, the documented group loading limits is 4 A at 40 ℃; 3 A at 60 ℃ horizontal; 2 A at 40 ℃ vertical. Compare this limit with the installed SIMATIC ET 200PA SMART DO 32 configuration. -
What cable distances are documented for these process outputs?
For 6ES7650-8EK80-0AA0, the documented maximum output cable distances is 1000 m shielded; 600 m unshielded. Compare this limit with the installed SIMATIC ET 200PA SMART DO 32 configuration. -
What circuit potential difference is permitted?
For 6ES7650-8EK80-0AA0, the documented permitted circuit potential difference is 75 V DC / 60 V AC. Compare this limit with the installed SIMATIC ET 200PA SMART DO 32 configuration. -
What identification supports ordering the SIMATIC ET 200PA SMART DO 32 spare?
Specify 6ES7650-8EK80-0AA0, quantity and the installed SIMATIC ET 200PA SMART DO 32 arrangement. Include label and connector photographs, and identify any required accessories separately. -
Which incoming checks apply to the digital process output module?
Compare the 6ES7650-8EK80-0AA0 label, connector condition and supplied accessories with the quotation. Verify the accepted SIMATIC ET 200PA SMART DO 32 configuration before replacing the installed item.
READY TO VERIFY YOUR PART?
Get a 6ES7650-8EK80-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
