PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200PA SMART
- 6ES7650-8EK80-1AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7650-8EK80-1AA0 Coated Thirty Two Channel Output Module
Siemens 6ES7650-8EK80-1AA0 is the conformally coated DO 32 x DC 24 V/0.5 A digital output module for SIMATIC ET 200PA SMART. It provides distributed discrete control in compatible IM 650-based process I/O stations.
The module has thirty-two outputs isolated in groups of eight and connects field wiring through a forty-pin front connector. Electronic short-circuit protection, individual channel status LEDs and a group fault indication support the documented output arrangement. It does not provide configurable diagnostic functions or diagnostic interrupts. Redundant load control requires the documented common reference potential and is distinct from paralleling outputs to increase current.
The module has thirty-two outputs isolated in groups of eight and connects field wiring through a forty-pin front connector. Electronic short-circuit protection, individual channel status LEDs and a group fault indication support the documented output arrangement. It does not provide configurable diagnostic functions or diagnostic interrupts. Redundant load control requires the documented common reference potential and is distinct from paralleling outputs to increase current.
BEFORE YOU BUY
Confirm the complete coated thirty two channel output module
ACTUAL APPLICATIONS
Application context for 6ES7650-8EK80-1AA0
6ES7650-8EK80-1AA0 supports discrete process control in chemical production, water treatment and power generation. The IM 650-based ET 200PA SMART station determines compatibility. Connected loads must follow the channel ratings, group-current limits and documented redundancy arrangement.
-
01 · CHEMICAL PROCESSING
Chemical Production and Process Control
Chemical Manufacturing Process ControlPetrochemical Production and Processing -
02 · WATER & WASTEWATER
Water Processing and Treatment Control
Water Treatment Process ControlWastewater Processing and Treatment -
03 · POWER GENERATION
Power Generation and Energy Production
Electric Power Generation ControlIndustrial Energy Production Control
Technical specifications for 6ES7650-8EK80-1AA0
-
Product Model6ES7650-8EK80-1AA0
-
Product ParametersCoated Thirty Two Channel Output Module
-
In stock9 units
-
ManufacturerSiemens
-
Digital output configuration32 channels, isolated in groups of 8
-
Nominal load voltage24 V DC
-
Rated output current0.5 A/channel; permitted 5 mA–0.6 A
-
Horizontal group-current limit4 A up to 40 ℃; 3 A up to 60 ℃
-
Vertical group-current limit2 A up to 40 ℃
-
Isolation test voltage500 V AC or 707 V DC
-
Maximum supply current60 mA backplane; 100 mA load supply unloaded
-
Typical module loss9.3 W
-
Off-state residual current0.5 mA maximum
-
Resistive switching delay200 μs ON; 300 μs OFF maximum
-
Load resistance range48 Ω–4 kΩ
-
Maximum lamp load5 W
-
Maximum switching frequencies100 Hz resistive; 0.5 Hz inductive; 10 Hz lamp
-
Electronic short-circuit threshold1 A typical
-
Front connector allocation40 pins
View all additional
Alternative Names
6ES7650-8EK80-1AA0
ET 200PA SMART coated DO 32x24V/0.5A
Conformally coated thirty-two-channel output module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7650-8EK80-1AA0 coated thirty two channel output module
Configure the coated DO 32 module within the compatible IM 650-based ET 200PA SMART station. Match the complete article and supported station configuration.
Assign the four output bytes and forty-pin front connector. Check each 24 V load and the group-current derating for the actual mounting orientation and ambient temperature.
Follow the manufacturer wiring and commissioning instructions. Verify field response, channel LEDs and group error indication; test redundant control only with the documented common reference potential.
Features:
- Digital output configuration: 32 channels, isolated in groups of 8
- Nominal load voltage: 24 V DC
- Rated output current: 0.5 A/channel; permitted 5 mA–0.6 A
The 6ES7650-8EK80-1AA0 coated thirty two channel output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7650-8EK80-1AA0 coated thirty two channel output module
Confirm the coated 6ES7650-8EK80-1AA0 execution rather than assuming equivalence with another DO 32 article or ET 200M module.
Archive channel assignments, output addressing and any redundant load arrangement. Inspect the front connector and record the accepted reference-potential wiring before removal.
Restore the verified station configuration and test all affected loads. Check the current derating and group fault behaviour before accepting the replacement.
Features:
- Digital output configuration: 32 channels, isolated in groups of 8
- Nominal load voltage: 24 V DC
- Rated output current: 0.5 A/channel; permitted 5 mA–0.6 A
The 6ES7650-8EK80-1AA0 coated thirty two channel output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7650-8EK80-1AA0 coated thirty two channel output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4 × 12.5 × 12cm
-
Shipping weight0.30kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7650-8EK80-1AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How are the thirty-two outputs electrically grouped?
The outputs are isolated in groups of eight. Apply the documented group-current limits and reference-potential wiring. -
Which interface module belongs to this I/O platform?
ET 200PA SMART uses the documented IM 650 station interface. Do not select IM 153 merely because a related module has a similar housing. -
Does this DO 32 module provide diagnostic interrupts?
No. The manual lists channel status LEDs and a group fault display, but no configurable diagnostic functions or diagnostic interrupts. -
What current is permitted per group in horizontal mounting?
The maximum is 4 A per group up to 40 ℃ and 3 A up to 60 ℃. Vertical mounting permits 2 A per group up to 40 ℃. -
Can outputs be paralleled to increase load capacity?
No. The manual permits the documented redundant load control with common M, but does not permit paralleling for performance increase. -
What front connector and address allocation are required?
The module uses a forty-pin front connector and four output bytes for thirty-two channels. -
What configuration information should be included in a coated DO quotation?
Provide 6ES7650-8EK80-1AA0, IM 650 station details, front-connector requirements, mounting temperature and any redundant-control arrangement. -
How should the coated module be inspected on receipt?
Compare the full coated article code, connector condition and output designation with the quotation. Match the delivered execution to the accepted station configuration.
READY TO VERIFY YOUR PART?
Get a 6ES7650-8EK80-1AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
