PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-1200
- 6ES7232-4HB32-0XB0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7232-4HB32-0XB0 delivers two configured analog output signals
Siemens 6ES7232-4HB32-0XB0 is the SIMATIC S7-1200 SM 1232 AQ 2 x 14 bit analog output module. It provides two outputs configurable for voltage or current, with a voltage range of -10 to +10 V and current ranges of 0 to 20 mA or 4 to 20 mA. Voltage and current modes have different resolution and load requirements.
Match the selected range to the receiving device and define the required output behavior when the CPU changes from RUN to STOP. The module does not provide field-to-logic or supply-to-output isolation. Verify references, cable shielding and settling time under the actual connected load before commissioning.
Match the selected range to the receiving device and define the required output behavior when the CPU changes from RUN to STOP. The module does not provide field-to-logic or supply-to-output isolation. Verify references, cable shielding and settling time under the actual connected load before commissioning.
BEFORE YOU BUY
Confirm the receiving device and output behavior
ACTUAL APPLICATIONS
6ES7232-4HB32-0XB0 links controller commands to analog receivers
Siemens documents the two-channel SM 1232 in S200 speed- and torque-control wiring examples. The S7-1200 manual also describes continuous PID control; select the output range and receiver configuration for each task.
-
01 · SPEED CONTROL
Provide an analog drive command
The Siemens S200 PTI speed-control connection example includes the SM 1232 AQ 2 x 14 bit. Match the drive analog-input assignment and command scaling, and validate the configured speed response with the machine in a controlled state. -
02 · TORQUE CONTROL
Connect a torque-mode drive interface
The S200 PTI torque-control example also identifies this two-channel output family. Configure the receiver and analog command for the selected drive mode; verify command direction, limits and the complete machine response before normal operation. -
03 · CONTINUOUS PROCESS
Transmit a PID output to an actuator
Use a correctly scaled analog output for a compatible continuous actuator in an engineered S7-1200 PID loop. Match the receiver voltage or current range and define behavior on controller STOP; validate the complete feedback loop before automatic control.
Technical specifications for 6ES7232-4HB32-0XB0
-
Product Model6ES7232-4HB32-0XB0
-
Product ParametersTwo-Channel Analog Output Module
-
In stock1 unit
-
ManufacturerSiemens
-
Analog output channels2
-
Voltage output range-10 to +10 V
-
Current output ranges0 to 20 mA or 4 to 20 mA
-
Voltage resolution14 bits
-
Current resolution13 bits
-
Voltage load impedanceAt least 1000 ohms
-
Current load impedanceMaximum 600 ohms
-
Accuracy at 25 degrees CPlus or minus 0.3% of full scale
-
Accuracy from -20 to 60 degrees CPlus or minus 0.6% of full scale
-
Voltage settling time to 95%300 microseconds resistive; 750 microseconds at 1 microfarad
-
Current settling time to 95%600 microseconds at 1 mH; 2 ms at 10 mH
-
RUN-to-STOP behaviorLast value or substitute value; default 0
-
Field-to-logic isolationNone
-
SM bus current consumption80 mA
-
24 V current consumption45 mA without load
View all additional
Alternative Names
6ES7232-4HB32-0XB0
Siemens SM 1232 AQ 2 x 14 bit
S7-1200 Two-Channel Analog Output
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SM 1232 ANALOG COMMAND INTERFACE
Match each output mode to its receiver
The two channels support voltage or current output. Voltage mode requires at least 1000 ohms of load impedance, while current mode permits a maximum of 600 ohms.
The module has no field-to-logic isolation. Confirm the reference wiring and any external isolation required by the receiving equipment before combining circuits.
Check the configured data scaling, load-dependent settling time and RUN-to-STOP behavior. Include output loads in the 24 V power calculation and test relevant diagnostic conditions.
Features:
- Two analog output channels
- Mode-specific load limits and resolution
- Controlled response on RUN-to-STOP transition
The Siemens 6ES7232-4HB32-0XB0 requires receiver ratings, signal references and output-state handling to be checked during system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match 6ES7232-4HB32-0XB0 to the two-channel SM 1232 output configuration. The four-channel article has different terminal arrangements and is not identified by this complete order number.
Record each output range, receiver load, channel address and STOP substitute setting before removing the module. Preserve the original signal-return and shield identification.
Use the specified gold connectors and exact-model pin assignment. After replacement, check each channel against a suitable load and verify the application command and stop behavior before process release.
Features:
- Record receiver range and load impedance
- Preserve output addresses and STOP values
- Test both channels under a controlled load
The Siemens 6ES7232-4HB32-0XB0 analog output module requires replacement verification of receiver compatibility, wiring references and configured output behavior before return to service.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The extracts identify the two-channel SM 1232 and its output ratings and wiring. Use the correct two-channel column when an official page also compares the four-channel variant.
Features:
- Available Siemens document references are confirmed before order
- Check receiver loads, output ranges and STOP values
- Accessories are supplied only when listed in the quotation
Documentation for the Siemens 6ES7232-4HB32-0XB0 must be checked against the two-channel output configuration; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size9.00 × 10.90 × 6.00 cm
-
Shipping weightApprox. 0.18 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7232-4HB32-0XB0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can a 500-ohm receiver be connected in voltage-output mode?
That is below the specified minimum voltage-mode load impedance of 1000 ohms. Check the receiver input and any parallel test equipment before wiring. Current mode has a different limit: a maximum load of 600 ohms. -
Does the 14-bit product designation also apply to current-output resolution?
No. Siemens specifies 14-bit resolution for voltage and 13-bit resolution for current. Use the resolution and scaling for the configured signal mode when assessing the smallest useful command change. -
Will a CPU STOP automatically force the connected actuator to a safe position?
Not necessarily. The module can retain the last value or output a configured substitute value; the default substitute is 0. Select and test the intended behavior for the receiving device. This setting alone does not establish a safety-rated function. -
Why can a capacitive input settle more slowly than a resistive test load?
The published voltage settling time to 95% is 300 microseconds for a resistive load and 750 microseconds at 1 microfarad. Receiver and cable capacitance matter, so do not infer the installed response solely from a bench test with a resistive load. -
Does this module isolate the field circuit from the PLC logic?
No. The official table lists no field-to-logic isolation and no isolation between the 24 V supply and the output. Review signal references and the need for external isolation in the complete installation. -
Is the listed 45 mA the complete field-power demand with both outputs loaded?
No. Siemens labels 45 mA as the 24 V current consumption without load. Include the connected output loads when calculating the power budget, as well as the separate 80 mA SM bus requirement. -
Can a zero-current command be used to prove that wire-break detection works?
No. The manual states that current-mode wire-break detection is possible only above 1 mA. Choose an appropriate test condition and observe the configured diagnostic behavior instead of treating a zero command as a valid open-loop test. -
How should an MRO technician prove that two replacement output channels are functioning?
Identify AQ0/AQ0M and AQ1/AQ1M from the exact two-channel pin table. With the process in a controlled test state, check each configured range against a suitable load, then verify the STOP response and relevant diagnostics before reconnecting automatic control.
READY TO VERIFY YOUR PART?
Get a 6ES7232-4HB32-0XB0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
