PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6DL1132-6BH00-0PH1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DL1132-6BH00-0PH1 Sixteen Channel Digital Output Module
Siemens 6DL1132-6BH00-0PH1 is a SIMATIC ET 200SP HA digital output module with sixteen 24 V DC, 0.5 A channels. It provides distributed output control for compatible high-availability process I/O stations.
The module uses P-switching outputs with electronic short-circuit and overload protection, channel diagnostics and configurable substitute values. Its maximum 8 A total output current is reduced at elevated temperatures according to mounting orientation. I/O redundancy requires the documented M1 terminal-block arrangement; it changes diagnostic test-current and short-circuit thresholds and does not permit current uprating by paralleling outputs.
The module uses P-switching outputs with electronic short-circuit and overload protection, channel diagnostics and configurable substitute values. Its maximum 8 A total output current is reduced at elevated temperatures according to mounting orientation. I/O redundancy requires the documented M1 terminal-block arrangement; it changes diagnostic test-current and short-circuit thresholds and does not permit current uprating by paralleling outputs.
BEFORE YOU BUY
Confirm the complete sixteen channel digital output module
ACTUAL APPLICATIONS
Application context for 6DL1132-6BH00-0PH1
6DL1132-6BH00-0PH1 supports digital output control in chemical production, water processing and energy generation. Suitability depends on HA station configuration, terminal blocks and field loads. Total output current must follow the mounting and temperature derating limits.
-
01 · CHEMICAL PROCESSING
Chemical Processing and Production Control
Chemical Process Production ControlPetrochemical Manufacturing and Processing -
02 · WATER & WASTEWATER
Water Processing and Treatment Control
Water Supply Process ControlWastewater Treatment Process Management -
03 · ENERGY PRODUCTION
Energy Production and Process Automation
Power Production Process ControlIndustrial Energy Process Automation
Technical specifications for 6DL1132-6BH00-0PH1
-
Product Model6DL1132-6BH00-0PH1
-
Product ParametersSixteen Channel Digital Output Module
-
In stock4 units
-
ManufacturerSiemens
-
Digital output configuration16 P-switching channels; 24 V DC
-
Rated output channel current0.5 A
-
Maximum module output current8 A; temperature-dependent derating
-
Allowed supply voltage19.2–28.8 V DC
-
Unloaded input current60 mA rated; 70 mA maximum
-
Typical module loss1.2 W; load-dependent
-
Output address allocation2 output bytes plus 2 QI bytes
-
Short-circuit response range0.7–1.3 A; up to 2.6 A in I/O redundancy
-
Wire-break test current0.7 mA; doubled in I/O redundancy
-
Inductive shutdown clampingL+ (37–41 V)
-
Maximum lamp switching load5 W
-
Permitted load resistance48 Ω–12 kΩ
-
Typical resistive switching delay50 μs ON; 100 μs OFF
-
Maximum switching rates100 Hz resistive; 2 Hz inductive; 10 Hz lamp
-
Horizontal total-current derating8 A through 50 ℃; 5.5 A at 60 ℃; 3 A at 70 ℃
View all additional
Alternative Names
6DL1132-6BH00-0PH1
ET 200SP HA DQ 16x24VDC/0.5A module
Sixteen-channel HA P-switching output module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6DL1132-6BH00-0PH1 sixteen channel digital output module
Select a supported ET 200SP HA terminal block for 6DL1132-6BH00-0PH1. If I/O redundancy is required, follow the documented M1 arrangement and compatible control-system configuration.
Check every 24 V DC output load against the 0.5 A channel limit and temperature-dependent module total. Include the two output bytes and two quality-information bytes in the configured address allocation.
Commission the complete HA output arrangement using the manufacturer procedure. Verify field polarity, substitute values, channel diagnostics and the intended controlled load response, including redundancy tests when configured.
Features:
- Digital output configuration: 16 P-switching channels; 24 V DC
- Rated output channel current: 0.5 A
- Maximum module output current: 8 A; temperature-dependent derating
The 6DL1132-6BH00-0PH1 sixteen channel digital output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6DL1132-6BH00-0PH1 sixteen channel digital output module
Match the full 6DL1132-6BH00-0PH1 designation and P-switching DQ 16 execution before exchange. Confirm the installed terminal block and the configured redundancy mode.
Record terminal assignments, field-load ratings, substitute values and diagnostic settings. Account for the doubled wire-break test current in a redundant configuration and retain the accepted project backup.
Restore the documented parameters and test all affected outputs under safe operating conditions. Confirm load response, channel diagnostics and total-current derating before accepting the replacement.
Features:
- Digital output configuration: 16 P-switching channels; 24 V DC
- Rated output channel current: 0.5 A
- Maximum module output current: 8 A; temperature-dependent derating
The 6DL1132-6BH00-0PH1 sixteen channel digital output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6DL1132-6BH00-0PH1 sixteen channel digital output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.25 × 11.5 × 13.8cm
-
Shipping weight0.14kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DL1132-6BH00-0PH1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What switching polarity is used by the sixteen HA outputs?
The outputs are P-switching at 24 V DC. The documented rated current is 0.5 A per channel. -
How does the total output-current limit change above 50 ℃?
For horizontal mounting, the stated total is 8 A through 50 ℃, 5.5 A at 60 ℃ and 3 A at 70 ℃. Vertical mounting has different limits. -
Which terminal-block arrangement enables I/O redundancy here?
The datasheet specifies redundancy with terminal-block type M1. Follow the complete system configuration rather than paralleling outputs for extra power. -
What diagnostic current can flow through a nominally off output?
The wire-break test current is 0.7 mA and is doubled in I/O redundancy. Check compatibility with sensitive connected loads. -
What short-circuit threshold applies to the HA output channels?
The stated threshold is 0.7–1.3 A, increasing up to a maximum of 2.6 A in I/O redundancy. Wiring impedance must allow the protection response. -
Which load types change the permitted output switching frequency?
The maximum rates are 100 Hz for resistive loads, 2 Hz for inductive loads and 10 Hz for lamp loads; the maximum lamp load is 5 W. -
What load information is needed to quote a DQ 16 HA replacement?
Provide 6DL1132-6BH00-0PH1, the terminal-block type, channel load schedule, mounting temperature and redundancy mode, together with the requested quantity. -
How should an incoming HA digital-output module be inspected?
Confirm the complete order code, DQ 16x24VDC/0.5A HA identification and connector condition. Match the offered execution to the recorded terminal block and project.
READY TO VERIFY YOUR PART?
Get a 6DL1132-6BH00-0PH1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
