PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6ES7132-6BH01-0BA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Sixteen Standard outputs with configurable diagnostics and value status
Siemens 6ES7132-6BH01-0BA0 is the DQ 16x24VDC/0.5A Standard output module for SIMATIC ET 200SP. Sixteen current-sourcing channels switch 24 V DC loads through an A0 BaseUnit, with a 0.5 A channel rating and an overall current limit that depends on mounting position and temperature.
Configurable diagnostics monitor missing supply voltage, wire breaks and output short circuits at module level. The QI configuration additionally provides a status bit for each output, while channel activation and substitute-value settings determine operation during controller stops. CC00 identifies the module-specific terminal coding.
Configurable diagnostics monitor missing supply voltage, wire breaks and output short circuits at module level. The QI configuration additionally provides a status bit for each output, while channel activation and substitute-value settings determine operation during controller stops. CC00 identifies the module-specific terminal coding.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 6ES7132-6BH01-0BA0 Fits Across Industrial Sectors
Industrial uses span production, processing and utility operations, subject to compatible configuration and the applicable engineering requirements.
-
01 · WATER & WASTEWATER
Drinking Water Supply and Municipal Wastewater Treatment
Drinking water production and distribution for municipal supply services.Wastewater collection and treatment across municipal and industrial operations. -
02 · FOOD & BEVERAGE
Food Manufacturing and Commercial Beverage Production
Food processing and preparation for packaged consumer food products.Beverage production and filling for commercial drinks manufacturing operations. -
03 · TEXTILE MANUFACTURING
Fiber Production and Textile Manufacturing Across Processing Stages
Fiber preparation and yarn production for textile manufacturing operations.Fabric manufacturing and finishing for commercial textile product production.
Technical specifications for 6ES7132-6BH01-0BA0
-
Product Model6ES7132-6BH01-0BA0
-
Spare Model6ES7132-6BH01-0BA0
-
Product ParametersET 200SP Standard Output Module
-
In stock1 unit
-
ManufacturerSiemens
-
Output channels16 current-sourcing PNP outputs
-
Load supply voltage24 V DC nominal; permitted range 19.2-28.8 V DC
-
Output current limits0.5 A per channel; up to 8 A total, with temperature and mounting-position derating
-
Load-resistance range48 ohm to 12 kohm
-
Lamp-load capacityMaximum 5 W
-
Off-state residual currentMaximum 0.1 mA; not eliminated by disabling wire-break diagnostics
-
Resistive-load switching delayTypically 50 microseconds on and 100 microseconds off
-
Electronic short-circuit protectionTypical response threshold 1 A; stated range 0.7-1.3 A
-
BaseUnit interfaceType A0; CC00 color coding; type A1 not permitted
-
Process address allocation2 output bytes; QI configuration adds 2 input bytes for value status
-
Configurable diagnostic scopeModule-level missing supply, wire-break, short-to-ground and short-to-L+ reporting
-
CPU STOP responseTurn outputs off, retain the last value, or output configured substitute values
-
Potential separationOutputs isolated from the backplane bus; no isolation between channels
-
Runtime parameter assignmentWRREC using data record 128; configured STEP 7 settings apply again after restart
-
Firmware update capabilityDocumented firmware V0.0; firmware update not supported
View all additional
Alternative Names
6ES7132-6BH01-0BA0
SIMATIC DQ 16x24VDC/0.5A ST
DQ 16x24VDC/0.5A ST Automation Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ET 200SP STANDARD OUTPUTS
Sixteen output channels with explicit quality and diagnostic feedback
The module operates with an ET 200SP CPU or Open Controller, or in distributed PROFINET IO and PROFIBUS DP stations. Its sixteen commands occupy two output bytes. Selecting the QI variant adds two input bytes so the program can evaluate whether each commanded value is actually present at its output terminal.
An A0 BaseUnit provides the CC00 terminal arrangement; returns can use AUX terminals or a potential distributor where required. Every potential group starts on a light-colored BaseUnit. Load planning must consider both channel current and total current derating: the full eight amperes are not available at every ambient temperature or mounting orientation.
Supply, wire-break and short-circuit diagnostics are enabled at module level, whereas channel activation and substitute values address individual outputs. Diagnostic choices also affect fault behavior: enabling wire-break detection can switch an affected channel off. The configuration should therefore coordinate alarm handling, CPU STOP response and expected field behavior rather than treating diagnostics as indication alone.
Features:
- Two output bytes with optional two-byte QI feedback
- A0 potential groups and temperature-dependent loading
- Diagnostic settings coordinated with output fault behavior
The Siemens 6ES7132-6BH01-0BA0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Start with the complete order number and the unit's FS marking, not its external appearance. The manual identifies Standard output electronics, A0 mounting and CC00 coding. Confirm STEP 7 catalog or HSP support, then preserve the configured QI choice and process addresses; changing that choice changes the input bytes expected by the program.
Reconcile the saved project with any parameters changed during operation. WRREC writes to data record 128 do not alter the CPU's stored STEP 7 configuration, which becomes effective again after restart. Restore channel activation, diagnostics and stop behavior deliberately; PROFIBUS GSD configuration has parameter restrictions that differ from the PROFINET configuration.
Before returning the station to service, verify the field returns, potential-group supply and individual load limits. Check PWR, DIAG and channel indications together with the diagnostic buffer or QI data. Match the hardware-specific electrical guidance: the 2025 FS21 specifications differ from older documentation, and neither version should be assumed to describe every supplied unit.
Features:
- Exact order code, FS marking and engineering support
- Saved configuration versus runtime parameter changes
- Wiring, load and diagnostic checks before service
The Siemens 6ES7132-6BH01-0BA0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Exact-model manufacturer data and relevant original manual pages
- Original terminal diagrams, configuration details and manufacturer safety context
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7132-6BH01-0BA0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7132-6BH01-0BA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How much additional address space does the QI configuration need?
Both configurations use two output bytes for the sixteen channels. Selecting the QI variant adds two input bytes, with one status bit per channel indicating whether the commanded output value is present at its terminal; zero indicates an incorrect value. -
Can the module be installed on an A1 BaseUnit?
No. Siemens permits only type A0 and warns that using A1 can trip its integrated fuse and make the terminals unusable. Select the A0 return and AUX arrangement for the field wiring and start each potential group on a light-colored BaseUnit. -
Are the diagnostics individually reported for each output?
The configurable wire-break, short-to-ground, short-to-L+ and missing-supply diagnostics are module-level. Channel LEDs indicate output status, not separate channel-diagnostic indications. Optional QI value status is a different mechanism, providing one quality bit for each channel. -
Does an 8 A module rating apply at every installation temperature?
No. Horizontal mounting permits 8 A through 40 degrees Celsius, falling to 6 A at 50 and 4 A at 60. Vertical mounting permits 8 A through 30 degrees Celsius, 6 A at 40 and 4 A at 50. Inductive-load cycling also requires the manufacturer's load calculation. -
Do parameter changes made in RUN remain in effect after a restart?
WRREC can send data record 128 during RUN without changing the STEP 7 parameters stored in the CPU. After restart, those configured settings apply again. If the transferred record is rejected, the module keeps its previous parameter assignment and reports the reason through STATUS. -
What must be compared when replacing an older hardware version?
Check the complete order code, FS marking, configuration support, BaseUnit and load conditions. Siemens documents hardware-dependent changes: the 2019 FS03 datasheet and 2025 FS21 manual differ in no-load consumption and inductive switching guidance. The current manual excludes safety functions and safety-related tripping, so a blanket safety or drop-in claim is inappropriate.
READY TO VERIFY YOUR PART?
Get a 6ES7132-6BH01-0BA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
