PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6ES7193-6BP40-0BA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7193-6BP40-0BA1 SIMATIC ET 200SP BaseUnit BU15
Siemens 6ES7193-6BP40-0BA1 is a SIMATIC ET 200SP BaseUnit BU15 designed for SIMATIC ET 200SP automation equipment. It provides the documented interfaces, electrical characteristics and installation format associated with this exact order number.
Use the applicable Siemens data for wiring, configuration and replacement. Match the complete suffix, terminal arrangement and operating limits, then perform controlled functional checks before returning the connected process or machine to service.
Use the applicable Siemens data for wiring, configuration and replacement. Match the complete suffix, terminal arrangement and operating limits, then perform controlled functional checks before returning the connected process or machine to service.
BEFORE YOU BUY
Confirm the complete simatic et 200sp baseunit bu15
ACTUAL APPLICATIONS
Application context for 6ES7193-6BP40-0BA1
6ES7193-6BP40-0BA1 supports industry applications that use the documented simatic et 200sp baseunit bu15 within SIMATIC ET 200SP. Its baseunit type is BU15-P16+A10+2D, and its rated voltage is 24 V DC. These characteristics are used in industrial automation, utility process control and facility automation where the installed system and complete order code have been confirmed.
-
01 · SEMICONDUCTOR & ELECTRONICS
Semiconductor, Electronics and Precision Technology Industries
Semiconductor fabrication and precision technology industry facility infrastructureElectronics manufacturing and advanced materials industry facility campuses -
02 · PHARMACEUTICALS
Pharmaceutical, Biotechnology and Life Sciences Facilities
Pharmaceutical manufacturing and sterile life sciences facility infrastructureBiotechnology research and regulated healthcare product facility campuses -
03 · AUTOMOTIVE MANUFACTURING
Automotive Assembly and Vehicle Component Manufacturing
Passenger vehicle assembly and body component manufacturing facilitiesAutomotive drivetrain, electronics and interior component manufacturing facilities
Technical specifications for 6ES7193-6BP40-0BA1
-
Product Model6ES7193-6BP40-0BA1
-
Product ParametersSIMATIC ET 200SP BaseUnit BU15
-
In stock1 unit
-
ManufacturerSiemens
-
Product FamilySIMATIC ET 200SP
-
BaseUnit TypeA1
-
BaseUnit DesignationBU15-P16+A0+12B/T
-
Hardware StatusFS10 and higher
-
Terminal TechnologyPush-in terminals
-
Rated Voltage24 V DC
-
P1/P2 Bus Current10 A max.
-
Process Terminal Current2 A max.
-
Additional Terminals2 × 5 terminals
-
Temperature SensorIntegrated
-
New Potential GroupNo
-
Potential Group from LeftYes
-
Number of Slots1
-
Isolation Test Voltage707 V DC, type test
-
System-Integrated Shield ConnectionSupported as an option
View all additional
Alternative Names
6ES7193-6BP40-0BA1
SIMATIC ET 200SP SIMATIC ET 200SP BaseUnit BU15
ET 200SP BU15-P16+A10+2D baseunit type
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7193-6BP40-0BA1 simatic et 200sp baseunit bu15
6ES7193-6BP40-0BA1 is a SIMATIC ET 200SP BaseUnit BU15 in the SIMATIC ET 200SP family. Confirm the complete order code, installed position and documented baseunit type of BU15-P16+A10+2D before wiring or mechanical installation.
Integrate the unit according to its documented rated voltage of 24 V DC. Match terminal allocation, supply, addressing and adjacent hardware to the accepted system drawing, and preserve the configured signal or drive relationships.
Commission 6ES7193-6BP40-0BA1 by checking the specified rated current of 10 A, status indications and diagnostics. Test every affected channel, communication path or controlled load, then record the final configuration and results.
Features:
- BaseUnit type: BU15-P16+A10+2D
- Rated voltage: 24 V DC
- Rated current: 10 A
The 6ES7193-6BP40-0BA1 simatic et 200sp baseunit bu15 requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7193-6BP40-0BA1 simatic et 200sp baseunit bu15
Select a replacement using the full 6ES7193-6BP40-0BA1 order code and the SIMATIC ET 200SP equipment definition. Verify the documented baseunit type of BU15-P16+A10+2D; a related family number does not establish interchangeability.
Before removal, photograph the label, terminals, connector orientation and adjacent module arrangement. Compare the rated voltage of 24 V DC, retain the installed project settings and identify any separately ordered terminal or mounting accessories.
After fitting the verified replacement, restore the approved configuration and validate the rated current of 10 A. Check power-up diagnostics and all affected functions before returning the equipment to service.
Features:
- Auxiliary terminals: 10 auxiliary terminals
- Terminal technology: Push-in terminals
- Width: 15 mm
The 6ES7193-6BP40-0BA1 simatic et 200sp baseunit bu15 requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7193-6BP40-0BA1 simatic et 200sp baseunit bu15 must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size1.5 × 14.1 × 3.5 cm
-
Shipping weight0.05 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7193-6BP40-0BA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the purpose of the add-on terminals on 6ES7193-6BP40-0BA1?
Siemens documents two groups of five add-on terminals on 6ES7193-6BP40-0BA1. Check the intended auxiliary connections and terminal schedule before moving field conductors. -
Does 6ES7193-6BP40-0BA1 start a new ET 200SP potential group?
No. The 6ES7193-6BP40-0BA1 continues the potential group from the left; verify this against the station power design before substitution. -
Which module and terminal configuration belongs with 6ES7193-6BP40-0BA1?
The 6ES7193-6BP40-0BA1 is a BU15-P16+A0+12B/T Type A1 BaseUnit with push-in terminals. Confirm mating module compatibility and the installed terminal assignment. -
How is the temperature-sensor connection checked on 6ES7193-6BP40-0BA1?
The 6ES7193-6BP40-0BA1 includes temperature-sensor capability. Trace its assigned terminals and compare measured values with the engineering configuration after replacement. -
What should be verified after exchanging 6ES7193-6BP40-0BA1?
Check left-hand power-bus continuity, push-in conductor seating, extra terminals and the attached I/O module's diagnostics on 6ES7193-6BP40-0BA1 before restoring service. -
Can an A0 BaseUnit be used instead of 6ES7193-6BP40-0BA1?
The 6ES7193-6BP40-0BA1 is Type A1 with additional terminals and temperature acquisition. A Type A0 unit should not be selected without verifying all required functions and wiring. -
What information distinguishes 6ES7193-6BP40-0BA1 in a purchase order?
Include the complete 6ES7193-6BP40-0BA1 code, Type A1 and BU15-P16+A0+12B/T, quantity and whether any color labels or terminal accessories are needed. -
What should be inspected before accepting 6ES7193-6BP40-0BA1?
Verify the 6ES7193-6BP40-0BA1 identification, 2 × 5 add-on terminals, push-in contacts and housing condition against the quotation.
READY TO VERIFY YOUR PART?
Get a 6ES7193-6BP40-0BA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
