PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-1500
- 6ES7521-1BL10-0AA0
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Thirty-two basic input channels in a compact twenty-five-millimeter format
Siemens 6ES7521-1BL10-0AA0 is the DI 32x 24VDC BA module for S7-1500 and ET 200MP. Thirty-two sinking inputs occupy a 25 mm housing, with channels organized in groups of sixteen and a fixed response rather than selectable HF filtering.
STEP 7 can represent the module as one thirty-two-channel unit, four eight-channel submodules or a documented shared-input configuration. These choices affect the process image and controller allocation. The module does not supply hardware interrupts or channel diagnostic functions.
STEP 7 can represent the module as one thirty-two-channel unit, four eight-channel submodules or a documented shared-input configuration. These choices affect the process image and controller allocation. The module does not supply hardware interrupts or channel diagnostic functions.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · TEXTILE MANUFACTURING
Manufactured Fibers and Textile Finishing
Manufactured fiber production for the wider textile manufacturing sector.Textile finishing for materials within the commercial fabric industry. -
02 · PLASTICS PROCESSING
Molded Plastic Products
Injection molding for plastic product manufacturing across industrial markets.Blow molding within the wider plastic product manufacturing industry. -
03 · FOOD & BEVERAGE
Beer and Soft Drink Production
Beer production within the brewing sector of beverage manufacturing.Soft drink manufacturing for the wider commercial beverage industry.
Technical specifications for 6ES7521-1BL10-0AA0
-
Product Model6ES7521-1BL10-0AA0
-
Product ParametersDI 32x24VDC BA Input Module
-
ManufacturerSiemens
-
Digital input count32
-
Input voltage24 V DC nominal
-
Permitted supply range20.4–28.8 V DC
-
Input characteristicSinking; IEC 61131 Type 3
-
Channel groupingGroups of 16; no individual channel isolation
-
Input responseFixed 3–4 ms for both signal transitions
-
Input logic levelsLogic 0: -30 to +5 V; logic 1: +11 to +30 V. Negative-voltage limit: -3 V continuously, -30 V only briefly for reverse-polarity protection.
-
Input current at logic 12.7 mA typical
-
Two-wire sensor quiescent current1.5 mA maximum
-
Maximum cable length1000 m shielded; 600 m unshielded
-
Backplane power consumption1.05 W
-
Typical power loss3 W
-
Hardware and diagnostic interruptsNot provided
-
Input configuration formats1×32 channels; 4×8-channel split or MSI under documented PROFINET requirements
-
Connection format40-pin push-in front connector in manufacturer's stated delivery scope
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
COMPACT THIRTY-TWO-CHANNEL INPUTS
Allocate the full input map without adding unsupported HF functions
The module combines thirty-two digital inputs with a 25 mm body, making the address arrangement as important as its physical width. In ordinary operation the signals occupy four input bytes. The wiring drawing separates the two sets of sixteen inputs, so both channel groups need matching field connections.
Input response is fixed in the documented three-to-four millisecond range rather than selected per channel. The basic module does not generate hardware or diagnostic interrupts and does not provide wire-break monitoring. Application requirements for those functions therefore need checking before this card is considered a suitable substitute.
For supported PROFINET arrangements, STEP 7 offers four eight-channel submodules or MSI copies of the input values. These configurations have different address layouts and controller-allocation rules. The interface module determines the available sharing arrangement, so preserve the project configuration when integrating or servicing the module.
Features:
- Thirty-two-channel compact format
- Fixed basic input behavior
- Four-submodule or MSI configuration
The Siemens 6ES7521-1BL10-0AA0 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Identify the complete BL10-0AA0 code before comparing spare modules. The original manual places this part in S7-1500 and ET 200MP, not S7-300. Confirm the installed system and module position from the project rather than allowing an incorrect catalog category to determine the replacement selection.
Retain the original four-byte input map or the documented split and MSI arrangement used by the project. Compare controller ownership and interface-module capabilities where input values are shared. The same total number of channels does not guarantee the same submodule configuration or process-image address layout.
Check both input-group connections, sensor current requirements and the 40-pin push-in connector against the manufacturer information. The housing is 25 mm wide, but the full connector and cable arrangement still need inspection. Do not promise counter functions, adjustable filtering or channel diagnostics that the basic module does not provide.
Features:
- Correct S7-1500 platform identity
- Split and MSI address preservation
- Basic function and connector checks
The Siemens 6ES7521-1BL10-0AA0 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.Features:
- Exact-model manufacturer data and relevant original manual pages
- Verified manufacturer product reference; separate installation document not supplied
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7521-1BL10-0AA0 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7521-1BL10-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which automation platforms support this module?
The manufacturer identifies S7-1500 and ET 200MP applicability. Check the installed backplane, interface and STEP 7 project for the full BL10-0AA0 article; an S7-300 catalog label does not establish compatibility. -
What is the normal process-image allocation?
The ordinary configuration has thirty-two digital inputs across four input bytes. The start address is assigned in the project; split and MSI configurations use different allocations. -
How many submodules are available in the split configuration?
The manual documents four eight-channel submodules. They can be assigned within a supported Shared Device arrangement, subject to the interface-module and engineering requirements. -
Can every controller use MSI without an interface check?
No. The number of usable submodules and controllers depends on the interface module. MSI copies the input values; it is not permission to assume unlimited independent controllers. -
Can its input filter be adjusted to match an HF module?
No. The input delay is non-configurable, with a three-to-four millisecond range for both transitions. Selectable HF filtering must not be advertised for this BA order number. -
Are wire-break and short-circuit diagnostics available?
The technical table lists neither function and no diagnostic or hardware interrupts. The visible channel and module LEDs do not add those functions. -
Does the compact width change the channel count?
No. This module has thirty-two inputs within a 25 mm housing. Its physical width should not be used to identify a similar-looking sixteen-channel basic module. -
What should be confirmed about the supplied connector?
The manufacturer lists a 40-pin push-in front connector in its delivery scope. Check that the specific spare-part offer includes the connector and any required accessories.
READY TO VERIFY YOUR PART?
Get a 6ES7521-1BL10-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7521-1BL10-0AA0DI 32x24VDC BA Input ModuleManufacturer: SiemensView Details
-
FBM214Fieldbus I/O moduleManufacturer: InvensysView Details -
Manufacturer: ProSoftView Details -
P0916WFProcess automation componentManufacturer: InvensysView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
