PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-200 SMART
- 6ES7288-1CR60-0AA1
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
CR60s economy processing for sixty fixed digital points
With 36 digital inputs and 24 relay outputs, Siemens 6ES7288-1CR60-0AA1 is the CPU CR60s member of S7-200 SMART. AC power and a 12 KB program area support its fixed local I/O configuration, while communication is through RS485 rather than an Ethernet port.
Dry-contact outputs switch externally supplied loads within the documented per-point and common-group limits. The CPU also provides a separate 24 V sensor-power output. Its fixed resource set excludes a memory card and real-time clock, distinguishing this economy design from standard SR60 controllers.
Dry-contact outputs switch externally supplied loads within the documented per-point and common-group limits. The CPU also provides a separate 24 V sensor-power output. Its fixed resource set excludes a memory card and real-time clock, distinguishing this economy design from standard SR60 controllers.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Industrial Production and Service Sectors
These industry examples describe Siemens' broader market coverage, not verified installations of this exact product. Product suitability depends on the documented configuration and engineering requirements.
-
01 · FOOD & BEVERAGE
Beer and Soft Drink Production
Beer production within the brewing sector of beverage manufacturing.Soft drink manufacturing for the wider commercial beverage industry. -
02 · PACKAGING
Pharmaceutical and Non-food Packaging
Pharmaceutical product packaging within the medicines and healthcare sector.Non-food product packaging across consumer goods and industrial markets. -
03 · PLASTICS PROCESSING
Blow Molding and Thermoforming
Blow molding within the wider plastic product manufacturing industry.Thermoforming as a manufacturing route for shaped plastic products.
Technical specifications for 6ES7288-1CR60-0AA1
-
Product Model6ES7288-1CR60-0AA1
-
Spare Model6ES7288-1CR60-0AA1
-
Product ParametersCPU CR60s Relay Controller
-
In stock1 unit
-
ManufacturerSiemens
-
AC supply range85 to 264 V AC, 47 to 63 Hz
-
Onboard digital inputs36, nominal 24 V DC
-
Onboard digital outputs24
-
Output technologyRelay, dry contact
-
Program memory12 KB
-
Ethernet interfaceNot available
-
Serial interface1 x RS485
-
Expansion modulesNot supported
-
Signal-board expansionNot supported
-
Sensor-power output24 V DC, 300 mA maximum
-
Dimensions, W x H x D175 x 100 x 81 mm; device, not packaging
-
Output current per point2 A maximum; observe common-group and load-type limits
-
Memory cardNot supported
-
User data memory8 KB
-
PROFINET IO rolesNeither controller nor I-Device
View all additional
Alternative Names
6ES72881CR600AA1
CPU CR60s AC/DC/Relay
SIMATIC S7-200 SMART 6ES7288-1CR60-0AA1
Siemens S7-200 SMART CPU CR60s AC/DC/Relay
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
S7-200 SMART ARCHITECTURE
CR60s economy processing for sixty fixed digital points
The CR60s communicates through RS485 and does not include Ethernet. Projects therefore use its documented serial communication resources; a PROFINET network or Ethernet programming connection cannot be created merely by selecting the same SMART family in a specification. One RS485 port carries the documented serial services.
The onboard interface contains thirty-six 24 V DC inputs and twenty-four relay outputs. External I/O modules and signal-board expansion are unavailable, so all required local points must be reconciled with this fixed configuration before a controller is selected. The enclosure width is 175 mm.
Program and user-data capacities are 12 KB and 8 KB respectively, with a maximum 2 KB configured as retentive memory. The manufacturer also lists no memory-card facility or real-time clock, so the control project must fit those fixed resources rather than assume the facilities of a standard SR60.
Features:
- 36/24 onboard digital I/O
- RS485-only economy architecture
- No I/O expansion
The Siemens 6ES7288-1CR60-0AA1 requires the documented hardware configuration, installation conditions and interface arrangement to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Check that the requested spare is specifically CR60s, order number 6ES7288-1CR60-0AA1. The Ethernet-equipped CR60 uses the 0AA0 suffix; treating the final digit as an interchangeable revision could change the intended communication architecture. The manufacturer identifies their communication ports in separate table columns.
Keep a recoverable program copy and record serial addressing, port configuration and I/O assignments. Because no memory card is supported, confirm the engineering connection and software compatibility needed to restore the controller before removing the installed unit. The CPU has no additional serial signal-board position.
Review the relay load grouping and AC supply against the installed wiring documentation. Any proposal to replace this fixed-I/O unit with an SR or ST controller is a separate engineering comparison, not a consequence of equal point count. Neither the fixed I/O count nor the relay designation proves compatibility.
Features:
- Complete suffix verification
- Project and firmware comparison
- Electrical configuration review
The Siemens 6ES7288-1CR60-0AA1 requires replacement verification based on its complete order number, installed hardware, signal configuration and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
Features:
- Exact-model manufacturer data and relevant original manual pages
- Verified manufacturer product reference; separate installation document not supplied
- Accessories and supplied documentation follow the written quotation
Documentation for the Siemens 6ES7288-1CR60-0AA1 includes an independent technical summary and selected original manufacturer pages; check the applicable document edition against the delivered product and approved installation documentation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm final packed dimensions
-
Shipping weightConfirm final packed weight
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginConfirm supplied-unit origin
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7288-1CR60-0AA1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the final 0AA1 suffix indicate an Ethernet CR60?
No. This exact order number is CR60s and has no Ethernet interface. Its built-in communication resource is one RS485 port, unlike the Ethernet-equipped 0AA0 CR60. -
How many digital circuits are integrated in CR60s?
The CPU integrates 36 nominal 24 V DC inputs and 24 dry-contact relay outputs. The fixed arrangement has no external expansion-module or signal-board support. -
Can CR60s support card-based program recovery?
The manufacturer lists no memory-card facility for this economy model. Confirm the project backup and suitable serial engineering connection instead of assuming standard-CPU card support. -
Does this economy CPU include timekeeping?
A real-time clock is not available in the CR60s feature table. Applications that depend on that resource need a documented design review; a sixty-point product name alone is insufficient. -
What are the memory limits of the CR60s configuration?
Program memory is 12 KB, user data is 8 KB and the maximum configurable retentive range is 2 KB. These separate limits differ from the standard SR/ST60 CPUs. -
Are the relay outputs intended for high-speed pulse trains?
No pulse-output resource is listed for CR60s. The relay table specifies a maximum switching frequency of 1 Hz; do not apply transistor-CPU pulse ratings to these contacts.
READY TO VERIFY YOUR PART?
Get a 6ES7288-1CR60-0AA1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
6ES7288-1CR60-0AA1CPU CR60s Relay ControllerManufacturer: SiemensView Details
-
6ES7288-5DT04-0AA0SB DT04 Digital I/O BoardManufacturer: SiemensView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
