PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- S7-300
- 6ES7392-1BM01-0AA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7392-1BM01-0AA0 Spring Contact Front Connector
Siemens 6ES7392-1BM01-0AA0 is a spring contact front connector in the SIMATIC S7-300 40-pole Spring Connector range. It supports the documented automation configuration in industrial equipment.
The 40-pole connector connects field signals to compatible S7-300 signal modules through spring-loaded contacts. One wire is accepted at each terminal, or two wires can share a suitable ferrule within the documented total section. Its coding, terminal allocation and prepared conductor ends must match the fitted signal module.
The 40-pole connector connects field signals to compatible S7-300 signal modules through spring-loaded contacts. One wire is accepted at each terminal, or two wires can share a suitable ferrule within the documented total section. Its coding, terminal allocation and prepared conductor ends must match the fitted signal module.
BEFORE YOU BUY
Confirm the complete spring contact front connector
ACTUAL APPLICATIONS
Application context for 6ES7392-1BM01-0AA0
6ES7392-1BM01-0AA0 is a spring contact front connector for S7-300 40-pole Spring Connector. Its use in compatible automation systems covers textile manufacturing, industrial manufacturing, food and beverage. The connected equipment and electrical ratings determine suitability.
-
01 · TEXTILE MANUFACTURING
Textile Manufacturing and Industrial Fabric Processing
Yarn and Fiber ProductionFabric Finishing and Processing -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Automated Product Assembly
Industrial Component ManufacturingAutomated Assembly Production -
03 · FOOD & BEVERAGE
Food Processing and Beverage Production Industries
Food Processing and PackagingBeverage Production and Bottling
Technical specifications for 6ES7392-1BM01-0AA0
-
Product Model6ES7392-1BM01-0AA0
-
Product ParametersSpring Contact Front Connector
-
In stock10 units
-
ManufacturerSiemens
-
Terminal pole count40
-
Connection methodSpring-loaded contacts
-
Wires per terminal1, or 2 in a common ferrule up to 0.75 mm² total
-
Conductor section0.25–0.75 mm², solid or flexible, with or without ferrule
-
AWG range24–19
-
Wire stripping length6 mm
-
Uninsulated ferrule length5–7 mm, DIN 46228 form A
-
Insulated ferrule lengthUp to 6 mm, DIN 46228 form E
-
Operating temperature0–60 ℃
-
Storage and transport temperature−40–70 ℃
View all additional
Alternative Names
6ES7392-1BM01-0AA0
SIMATIC S7-300 40-pole Spring Connector
Spring Contact Front Connector for S7-300 40-pole Spring Connector
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7392-1BM01-0AA0 spring contact front connector
Match 6ES7392-1BM01-0AA0 to the accepted SIMATIC S7-300 40-pole Spring Connector configuration and associated parts before integration.
The 40-pole connector connects field signals to compatible S7-300 signal modules through spring-loaded contacts. One wire is accepted at each terminal, or two wires can share a suitable ferrule within the documented total section. Its coding, terminal allocation and prepared conductor ends must match the fitted signal module.
Follow the applicable manufacturer instructions for 6ES7392-1BM01-0AA0. Compare connection assignments, retain the accepted wiring record and test the affected signals before returning the equipment to service.
Features:
- Terminal pole count: 40
- Connection method: Spring-loaded contacts
- Wires per terminal: 1, or 2 in a common ferrule up to 0.75 mm² total
The 6ES7392-1BM01-0AA0 spring contact front connector requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7392-1BM01-0AA0 spring contact front connector
Confirm the complete 6ES7392-1BM01-0AA0 identity and SIMATIC S7-300 40-pole Spring Connector execution before replacement. Match the documented connection and electrical ratings.
Record the existing spring contact front connector connections, companion modules and configuration. Isolate the affected circuits according to the site procedure before removing the installed part.
After fitting 6ES7392-1BM01-0AA0, restore the accepted arrangement and test the affected signals. Retain the component identity and final functional test results with the equipment record.
Features:
- Terminal pole count: 40
- Connection method: Spring-loaded contacts
- Wires per terminal: 1, or 2 in a common ferrule up to 0.75 mm² total
The 6ES7392-1BM01-0AA0 spring contact front connector requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7392-1BM01-0AA0 spring contact front connector must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.5 × 4.5 × 2.1cm
-
Shipping weight0.08kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536909000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7392-1BM01-0AA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many poles are provided by the BM01 front connector?
6ES7392-1BM01-0AA0: terminal pole count is 40. Apply the documented limits of this execution. -
What contact construction is used by the 40-pole BM01 execution?
6ES7392-1BM01-0AA0: connection method is Spring-loaded contacts. Apply the documented limits of this execution. -
Can two wires share a BM01 terminal?
6ES7392-1BM01-0AA0: wires per terminal is 1, or 2 in a common ferrule up to 0.75 mm² total. Apply the documented limits of this execution. -
What common conductor interval applies to BM01 wiring?
6ES7392-1BM01-0AA0: conductor section is 0.25–0.75 mm², solid or flexible, with or without ferrule. Apply the documented limits of this execution. -
What AWG interval corresponds to the BM01 conductor rating?
6ES7392-1BM01-0AA0: awg range is 24–19. Apply the documented limits of this execution. -
How much insulation is removed for BM01 spring contacts?
6ES7392-1BM01-0AA0: wire stripping length is 6 mm. Apply the documented limits of this execution. -
Which module and wire details identify the 40-pole spring connector for purchase?
For 6ES7392-1BM01-0AA0, provide the complete article and quantity, the installed SIMATIC S7-300 40-pole Spring Connector identity and a connector photograph. Verify terminal pole count (40) and connection method (Spring-loaded contacts) against the requested execution. -
Which arrival checks identify the spring contact front connector 6ES7392-1BM01-0AA0?
Compare the complete 6ES7392-1BM01-0AA0 label with the ordered SIMATIC S7-300 40-pole Spring Connector execution. Inspect the connectors and enclosure and verify the listed accessories before replacement.
READY TO VERIFY YOUR PART?
Get a 6ES7392-1BM01-0AA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
