PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- Simatic DP
- 6ES7972-0BA41-0XA0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6ES7972-0BA41-0XA0 Angled PROFIBUS Screw Connector
Siemens 6ES7972-0BA41-0XA0 is a angled profibus screw connector in the SIMATIC DP PROFIBUS RS485 range. It supports the documented automation configuration in industrial equipment.
The screw-terminal connector links a PROFIBUS cable to a compatible 9-pin D-sub station interface. Its 35-degree outlet has no programming-device socket. Enabling the integrated termination disconnects the outgoing cable; only segment ends should be terminated, and their end-device supply must remain available.
The screw-terminal connector links a PROFIBUS cable to a compatible 9-pin D-sub station interface. Its 35-degree outlet has no programming-device socket. Enabling the integrated termination disconnects the outgoing cable; only segment ends should be terminated, and their end-device supply must remain available.
BEFORE YOU BUY
Confirm the complete angled profibus screw connector
ACTUAL APPLICATIONS
Application context for 6ES7972-0BA41-0XA0
6ES7972-0BA41-0XA0 is a angled profibus screw connector for DP PROFIBUS RS485. Its use in compatible automation systems covers chemical processing, pulp and paper, textile manufacturing. The connected equipment and electrical ratings determine suitability.
-
01 · CHEMICAL PROCESSING
Chemical Manufacturing and Industrial Material Processing
Industrial Chemical ManufacturingSpecialty Chemical Processing -
02 · PULP & PAPER
Pulp Production and Paper Manufacturing Processes
Pulp Processing and PreparationPaper and Board Production -
03 · TEXTILE MANUFACTURING
Textile Manufacturing and Industrial Fabric Processing
Yarn and Fiber ProductionFabric Finishing and Processing
Technical specifications for 6ES7972-0BA41-0XA0
-
Product Model6ES7972-0BA41-0XA0
-
Product ParametersAngled PROFIBUS Screw Connector
-
In stock4 units
-
ManufacturerSiemens
-
Maximum transmission rate12 Mbit/s
-
Programming-device socketNot provided
-
Bus terminationIntegrated resistor with outgoing-cable disconnect
-
Cable outlet angle35°
-
Station interface9-pin D-sub male
-
Cable wire terminals4 screw positions, up to 1.5 mm²
-
Permitted cable diameter8 ± 0.5 mm
-
End-device supply4.75–5.25 V DC
-
Current consumption5 mA maximum
-
Operating ambient0–60 ℃
-
Transport and storage ambient−25–80 ℃
-
Relative humidity75% maximum at 25 ℃
-
Protection degreeIP20
View all additional
Alternative Names
6ES7972-0BA41-0XA0
SIMATIC DP PROFIBUS RS485
Angled PROFIBUS Screw Connector for DP PROFIBUS RS485
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6ES7972-0BA41-0XA0 angled profibus screw connector
Match 6ES7972-0BA41-0XA0 to the accepted SIMATIC DP PROFIBUS RS485 configuration and associated parts before integration.
The screw-terminal connector links a PROFIBUS cable to a compatible 9-pin D-sub station interface. Its 35-degree outlet has no programming-device socket. Enabling the integrated termination disconnects the outgoing cable; only segment ends should be terminated, and their end-device supply must remain available.
Follow the applicable manufacturer instructions for 6ES7972-0BA41-0XA0. Compare connection assignments, retain the accepted wiring record and test the affected signals before returning the equipment to service.
Features:
- Maximum transmission rate: 12 Mbit/s
- Programming-device socket: Not provided
- Bus termination: Integrated resistor with outgoing-cable disconnect
The 6ES7972-0BA41-0XA0 angled profibus screw connector requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6ES7972-0BA41-0XA0 angled profibus screw connector
Confirm the complete 6ES7972-0BA41-0XA0 identity and SIMATIC DP PROFIBUS RS485 execution before replacement. Match the documented connection and electrical ratings.
Record the existing angled profibus screw connector connections, companion modules and configuration. Isolate the affected circuits according to the site procedure before removing the installed part.
After fitting 6ES7972-0BA41-0XA0, restore the accepted arrangement and test the affected signals. Retain the component identity and final functional test results with the equipment record.
Features:
- Maximum transmission rate: 12 Mbit/s
- Programming-device socket: Not provided
- Bus termination: Integrated resistor with outgoing-cable disconnect
The 6ES7972-0BA41-0XA0 angled profibus screw connector requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6ES7972-0BA41-0XA0 angled profibus screw connector must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size1.58 × 5.4 × 3.95cm
-
Shipping weight0.05kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536909000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6ES7972-0BA41-0XA0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How fast can the earlier BA41 bus connection operate?
6ES7972-0BA41-0XA0: maximum transmission rate is 12 Mbit/s. Apply the documented limits of this execution. -
Does the BA41 screw connector include a programming socket?
6ES7972-0BA41-0XA0: programming-device socket is Not provided. Apply the documented limits of this execution. -
How does BA41 combine termination and outgoing-cable isolation?
6ES7972-0BA41-0XA0: bus termination is Integrated resistor with outgoing-cable disconnect. Apply the documented limits of this execution. -
What outgoing angle identifies the BA41 execution?
6ES7972-0BA41-0XA0: cable outlet angle is 35°. Apply the documented limits of this execution. -
What station-side connector is used by BA41?
6ES7972-0BA41-0XA0: station interface is 9-pin D-sub male. Apply the documented limits of this execution. -
What cable-core section fits BA41 screw terminals?
6ES7972-0BA41-0XA0: cable wire terminals is 4 screw positions, up to 1.5 mm². Apply the documented limits of this execution. -
What identifies an old 35-degree screw plug without a PG socket for ordering?
For 6ES7972-0BA41-0XA0, provide the complete article and quantity, the installed SIMATIC DP PROFIBUS RS485 identity and a connector photograph. Verify maximum transmission rate (12 Mbit/s) and programming-device socket (Not provided) against the requested execution. -
Which arrival checks identify the angled profibus screw connector 6ES7972-0BA41-0XA0?
Compare the complete 6ES7972-0BA41-0XA0 label with the ordered SIMATIC DP PROFIBUS RS485 execution. Inspect the connectors and enclosure and verify the listed accessories before replacement.
READY TO VERIFY YOUR PART?
Get a 6ES7972-0BA41-0XA0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
