PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Vibro-Meter
- Vibro-Meter Proximity Measurement
- IQS450 204-450-000-002
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IQS450 204-450-000-002 Proximity Sensor Signal Conditioner
Vibro-Meter IQS450 204-450-000-002 is a proximity sensor signal conditioner in the IQS450 range. It conditions the proximity signal from a matched TQ-series sensor and extension cable for machinery protection or condition monitoring. The complete A/B/H/I ordering options determine the environment, output sensitivity, chain length and mounting arrangement.
The conditioner uses a high-frequency modulator/demodulator and provides a gap-proportional voltage or current output. The two-wire and three-wire output arrangements have different signal spans and supply currents. Verify the complete configuration and temperature-dependent supply derating before selecting or replacing the conditioner.
The conditioner uses a high-frequency modulator/demodulator and provides a gap-proportional voltage or current output. The two-wire and three-wire output arrangements have different signal spans and supply currents. Verify the complete configuration and temperature-dependent supply derating before selecting or replacing the conditioner.
BEFORE YOU BUY
Confirm the complete proximity sensor signal conditioner
ACTUAL APPLICATIONS
Application context for IQS450 204-450-000-002
IQS450 204-450-000-002 is a proximity sensor signal conditioner in the IQS450 range. It serves power generation, oil & gas, chemical processing. Suitability depends on the selected process, electrical ratings and installed configuration.
-
01 · POWER GENERATION
Steam Turbine and Electric Power Generation
Steam Turbine Power GenerationHydroelectric Turbine Power Generation -
02 · OIL & GAS
Oil Refining and Natural Gas Processing
Refinery Compression and ProcessingNatural Gas Compression Operations -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Industrial Process Production
Industrial Chemical ProductionPetrochemical Processing and Production
Technical specifications for IQS450 204-450-000-002
-
Product ModelIQS450 204-450-000-002
-
Product ParametersProximity Sensor Signal Conditioner
-
In stock1 unit
-
ManufacturerVibro-Meter
-
Signal-conditioning supply-20 to -32 V DC, temperature derating applies
-
Voltage-mode dynamic output span16 V
-
Voltage-mode output impedance500 Ω
-
Voltage-mode short-circuit current45 mA
-
Current-mode dynamic output span5 mA
-
Output capacitance1 nF
-
Output inductance100 µH
-
Normal voltage-mode supply current13 mA ±1 mA
-
Maximum voltage-mode supply current25 mA
-
Operating ambient temperature-35 to +85 ℃
-
Storage ambient temperature-40 to +85 ℃
-
Enclosure protectionIP40
-
Vibration withstand2 g peak at 10 to 55 Hz
-
Shock withstand15 g peak, half-sine 11 ms
-
Maximum terminal conductor section2.5 mm²
View all additional
Alternative Names
IQS450 204-450-000-002
IQS450 Proximity Sensor Signal Conditioner
IQS450 -20 to -32 V DC, temperature derating applies signal-conditioning supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IQS450 204-450-000-002 proximity sensor signal conditioner
Vibro-Meter IQS450 204-450-000-002 is a proximity sensor signal conditioner in the IQS450 range. It conditions the proximity signal from a matched TQ-series sensor and extension cable for machinery protection or condition monitoring. The complete A/B/H/I ordering options determine the environment, output sensitivity, chain length and mounting arrangement.
The conditioner uses a high-frequency modulator/demodulator and provides a gap-proportional voltage or current output. The two-wire and three-wire output arrangements have different signal spans and supply currents. Verify the complete configuration and temperature-dependent supply derating before selecting or replacing the conditioner.
Use the applicable IQS450 documentation for IQS450 204-450-000-002. Verify the complete configuration, connection assignments and environmental limits, then record the functional checks before commissioning.
Features:
- Signal-conditioning supply: -20 to -32 V DC, temperature derating applies
- Voltage-mode dynamic output span: 16 V
- Voltage-mode output impedance: 500 Ω
The IQS450 204-450-000-002 proximity sensor signal conditioner requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IQS450 204-450-000-002 proximity sensor signal conditioner
Identify the complete IQS450 204-450-000-002 nameplate and the installed IQS450 configuration before replacement. Match all connectors and the documented electrical ratings.
The conditioner uses a high-frequency modulator/demodulator and provides a gap-proportional voltage or current output. The two-wire and three-wire output arrangements have different signal spans and supply currents. Verify the complete configuration and temperature-dependent supply derating before selecting or replacing the conditioner.
After fitting IQS450 204-450-000-002, restore the recorded configuration and verify every affected signal or communication path. Retain diagnostic results and the acceptance record.
Features:
- Signal-conditioning supply: -20 to -32 V DC, temperature derating applies
- Voltage-mode dynamic output span: 16 V
- Voltage-mode output impedance: 500 Ω
The IQS450 204-450-000-002 proximity sensor signal conditioner requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IQS450 204-450-000-002 proximity sensor signal conditioner must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8.5 × 5.3 × 3.6cm
-
Shipping weight0.15kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IQS450 204-450-000-002
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the IQS450 base number define every ordering option?
No. IQS450 204-450-000-002 is the conditioner base number; A/B/H/I options specify environment, sensitivity, system length and mounting. -
Can voltage and current output wiring be treated identically?
No. IQS450 204-450-000-002 uses three-wire voltage or two-wire current output with different dynamic signal spans. -
What is the voltage-output span of IQS450?
The IQS450 204-450-000-002 voltage-mode dynamic span is 16 V with a 500 Ω output impedance. -
How is high ambient temperature accommodated?
The IQS450 204-450-000-002 maximum supply voltage must be derated according to the thermal graph when ambient temperature rises. -
What cable connector is used at the sensor input?
IQS450 204-450-000-002 uses a self-locking miniature coaxial female connector that is hand-tightened until locked. -
What conductor section can the output terminals accept?
The three IQS450 204-450-000-002 output/power screw terminals accept a maximum 2.5 mm² wire section. -
What should be quoted besides the IQS450 base code?
Provide the IQS450 204-450-000-002 complete A/B/H/I options, matched TQ sensor, extension cable and requested chain output. -
Which checks establish a matching proximity conditioner replacement?
Compare the IQS450 204-450-000-002 option label, supply polarity, output mode, total chain length and calibration before connecting it.
READY TO VERIFY YOUR PART?
Get a IQS450 204-450-000-002 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
