ABB

PULSE TRANFORMER

Isolation Voltage: Typically 2–4 kV
Primary/Secondary Voltage: 5–24 V AC/DC input
Operating Temperature: -40°C to +85°C
Certifications: Complies with IEC/EN
Turns Ratio: 1:1 or custom ratios
Impedance:50–100 Ω

Binary output module

24 binary outputs with enclosed relays (NO contacts)
Current carrying capacity of the relays: max. 1 A
Channel-by-channel isolation of the outputs
Module is capable of redundant operation
Monitoring of the module
Counter for switching cycles (channel by channel)

Analog output module

16 analog outputs, output signal 0/4 ... 20 mA, 
channel-by-channel configuration
Load: max. 700 Ohm
Monitoring of loads
Channel-by-channel isolation of outputs
Module is capable of redundant operation
Digital communication with field devices according to 
HART protocol (Version 5.0 / 5.1)
Monitoring of modules

Binary input module

32 binary inputs divided into two groups each with 16 inputs
Process current circuits in accordance 
with EN 50020 with type of protection EEx ib IIC
Combined installation possible with 
"Non-Ex-modules" in one module sub-rack
Signal recording with 1 ms time resolution
Monitoring of module
Central galvanic separation of system inputs
Group-set filter time
Module is capable of redundancy

Binary input module

32 binary inputs divided into two groups each with 16 inputs
Process current circuits in accordance 
with EN 50020 with type of protection EEx ib IIC
Combined installation possible with 
"Non-Ex-modules" in one module sub-rack
Signal recording with 1 ms time resolution
Monitoring of module
Central galvanic separation of system inputs
Group-set filter time
Module is capable of redundancy

Coupling Unit

Data Rate: Up to 12 Mbps
Isolation:1500 V AC
Power Supply: 24 V DC (±10%)
Power Consumption: Typically 5–10 W
Fieldbus Port: 9-pin D-sub or M12 for PROFIBUS
Operating Temperature: 
-25°C to +70°C (-13°F to +158°F)
Humidity: 5–95% noncondensing

Control panel

Type: LCD or TFT color touchscreen
Operating Voltage: 24 VDC (±10%) or 110–230 VAC
Power Consumption: 10–20 W 
Operating Temperature: -10°C to +55°C 
Storage Temperature: -40°C to +70°C
Humidity: 5–95% (non-condensing)

FIRING PULSE TRANSFORMER BOARD

Model: SDCS-PIN-H41
Part Number: 3ADT320600R1501
Pulse Voltage: 5–24 V DC
Isolated Pulse Voltage: Typically 10–30 V
Output Current: 1–2 A
Primary-to-Secondary Isolation: ≥2500 V AC
Insulation Resistance: >100 MΩ

Fast I/O module

Input Voltage: 24 VDC
Output Current: ≤0.5 A per channel 
Channel-to-Channel: 500 VAC.
Channel-to-Backplane: 1500 VAC 
Operating Temperature: -25°C to +60°C (-13°F to +140°F).
Humidity: 5–95% non-condensing
Supply Voltage: 24 VDC (±10%) via backplane.
Power Consumption: ≤5 W

HVD BOARD

Voltage Rating:  3.3 kV, 6.6 kV
Control Voltage: 24 VDC
Power Consumption: <20 W
Operating Temperature: 0°C to +55°C
Humidity: Up to 95% RH (non-condensing)

Power Supply Board

Model: SDCS-POW-H01
Part Number: 3ADT318700R1501
Application: Dedicated power supply unit 
Input Voltage Nominal: 24 V DC 
Range: 20–30 V DC
AC Input Option: support 100–240 V AC (50/60 Hz)
Primary Output: 24 V DC 
Continuous: 5–10 A
Peak Current: Up to 15 A

Excitation plate

Model: SDCS-FEX-4a
Part Number: 3ADT314500R1501
Input Voltage Nominal: 24 V DC 
Range: 20–30 V DC
Voltage Range: 0–250 V DC
Current Capacity: Up to 20–50 A 
Continuous Output Power: ~5–10 kW
Reference Input: 0–10 V DC or 4–20 mA

DCSLink communication options board

Supply Voltage Nominal: 24 V DC
Supply Voltage Range: 20–30 V DC
Power Consumption:Typically <5 W
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 5–95% RH (non-condensing).

FIRING PULSE TRANSFORMER BOARD

Model: SDCS-PIN-H41
Part Number: 3ADT320600R1501
Pulse Voltage: 5–24 V DC
Isolated Pulse Voltage: Typically 10–30 V
Output Current: 1–2 A
Primary-to-Secondary Isolation: ≥2500 V AC
Insulation Resistance: >100 MΩ

Power supply board

Model: SDCS-PIN-H51
Order Code/Part Number: 3ADT320700R1501
Nominal Input Voltage: 24 V DC 
Input Voltage Range: 20–30 V DC 
Primary Output: 24 V DC
Output Current: Typically 2–5 A
Continuous Power: ~60–120 W
Typically ≥85%

I/O MODULE OPTICAL

Type:Optically isolated I/O module
Channels:8–32 digital I/O channels
Data Rate:10/100 Mbps
Isolation Voltage:≥2500 V
Operating Temperature:-40°C to +70°C
Power Supply:24 V DC ±10%

CENTRAL PROCESSING MODULE

Operating Temp: -20°C to +60°C
Power Supply: 24 VDC ±10%
Memory: 512 MB–2 GB RAM

Control board

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

1KHL015502R0004 N4BDTEBIT

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

Coupler Module

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

CONTROL CARD

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

Coupler Module

Power Supply:24 V DC
Power consumption: < 3 W
Supports up to 64 modules 
Operating Temperature:–25°C to +60°C
Humidity:≤ 95% (non-condensing)

Power Supply Module

Output Voltage:24 V DC
Output Current:5 A continuous
Reinforced isolation :3000 V AC input-to-output
Input-to-ground:1500 V AC
Power Factor:≥ 0.95 
Operating Temperature:
–25°C to +70°C
Storage Temperature:
–40°C to +85°C

Power Supply Module

Output Voltage:24 V DC
Output Current:5 A continuous
Reinforced isolation :3000 V AC input-to-output
Input-to-ground:1500 V AC
Power Factor:≥ 0.95 
Operating Temperature:
–25°C to +70°C
Storage Temperature:
–40°C to +85°C

COBUX-HW INTERFACE CARD

Type: COBUX-HW Interface Card
Operating Voltage:24V DC
Operating Temperature Range:-20°C to +70°C
Storage Temperature Range:
-40°C to +85°C.
Analog inputs: 0–10 V, ±10 V, 4–20 mA 
Analog outputs: 0–10 V, 4–20 mA