PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC031184-003
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3HAC031184-003 irb 4600 motor with pinion
ABB 3HAC031184-003 is an irb 4600 motor with pinion in the ABB Robots. It is used to convert electrical energy into the documented mechanical drive function.
Its documented configuration includes product model of 3HAC031184-003, abb product category of Spare Parts (IRB 4600), abb catalog description of Motor with pinion, and robot family of IRB 4600. During operation, the irb 4600 motor with pinion performs its assigned irb 4600 motor with pinion function through the documented power, signal and communication interfaces.
Its documented configuration includes product model of 3HAC031184-003, abb product category of Spare Parts (IRB 4600), abb catalog description of Motor with pinion, and robot family of IRB 4600. During operation, the irb 4600 motor with pinion performs its assigned irb 4600 motor with pinion function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete irb 4600 motor with pinion
ACTUAL APPLICATIONS
Application context for 3HAC031184-003
Manufacturer documentation places the irb 4600 motor with pinion in practical generic applications. The three cases below describe different operating tasks in which 3HAC031184-003 performs its documented product-family role with the configured companion equipment.
-
01 · WATER & WASTEWATER
Govern aeration control with Irb 4600 process control
Within the blowers and dissolved-oxygen loops, 3HAC031184-003 supports the configured automation role as a irb 4600 motor with pinion. During changing oxygen demand, the system uses this function to adjust air delivery from process feedback, helping it stabilize treatment performance. -
02 · FOOD & BEVERAGE
Integrate recipe mixing with Irb 4600 process control
Inside the mixers and ingredient skids, 3HAC031184-003 handles its designated signal or control duty as a irb 4600 motor with pinion. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state. -
03 · AUTOMOTIVE
Integrate paint-shop conveying with Irb 4600 process control
At the control layer of the carrier tracking and booth interfaces, 3HAC031184-003 provides its specified system function as a irb 4600 motor with pinion. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process.
Technical specifications for 3HAC031184-003
-
Product Model3HAC031184-003
-
Product Parametersirb 4600 motor with pinion
-
In stock1 unit
-
ManufacturerABB
-
Product Model3HAC031184-003
-
ABB Product CategorySpare Parts (IRB 4600)
-
ABB Catalog DescriptionMotor with pinion
-
Robot FamilyIRB 4600
-
Component TypeMotor assembly with pinion
-
Product LevelRobot spare part
-
Official Product RecordABB Global product search
-
Official Family ReferenceABB IRB 4600 product page
-
Controlled DocumentationABB Robotics One
-
Product FamilyABB Robots
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Robots control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
View all additional
Alternative Names
3HAC031184 003
ABB irb 4600 motor with pinion
ABB Robots irb 4600 motor with pinion
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3HAC031184-003 to the installed ABB Robots
ABB 3HAC031184-003 is a irb 4600 motor with pinion for the ABB Robots. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare robot family (IRB 4600), component type (Motor assembly with pinion) and product level (Robot spare part) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3HAC031184-003
- Product class: irb 4600 motor with pinion
- Family: ABB Robots
The ABB 3HAC031184-003 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3HAC031184-003 identity before exchange
Replace 3HAC031184-003 only after matching the complete article code, irb 4600 motor with pinion, installed ABB Robots role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3HAC031184-003
- Product class: irb 4600 motor with pinion
- Family check: ABB Robots
The ABB 3HAC031184-003 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3HAC031184-003
- Product family: ABB Robots
- Exact ABB identity required before service
Documentation for ABB 3HAC031184-003 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight0.80 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC031184-003
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What commissioning evidence is needed after fitting 3HAC031184-003?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3HAC031184-003. -
Which companion hardware must match 3HAC031184-003?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3HAC031184-003. -
What drawings should engineering review before installing 3HAC031184-003?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Robots service documentation for 3HAC031184-003. -
How is interchangeability assessed for 3HAC031184-003?
Physical similarity is insufficient; 3HAC031184-003 must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3HAC031184-003?
Review power, communication, gate, I/O or controller status relevant to 3HAC031184-003, then record resolved alarms. -
Which nameplate fields identify 3HAC031184-003 for a maintenance replacement?
Match the complete ABB article code 3HAC031184-003, its board or device designation, product family and installed position. -
Which connections must be recorded before removing 3HAC031184-003?
Photograph connector keying, terminal references, cable destinations, shields, earth points and neighboring assemblies used by 3HAC031184-003. -
Which configuration records should be backed up before replacing 3HAC031184-003?
Back up the hardware list, parameter set, controller project or converter configuration that identifies 3HAC031184-003.
READY TO VERIFY YOUR PART?
Get a 3HAC031184-003 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
