PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Robots
- 3HAC13398-2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
ODVA power supply for documented OmniCore configurations
ABB 3HAC13398-2 is identified as the DSQC 634 power supply in the OmniCore V400XT product manual. ABB describes it as an optional ODVA power supply and documents its installation, replacement and DC OK indication within the controller cabinet.
The manual lists dedicated power-supply harnesses and an end clamp for this assembly. Before service, identify the installed option and follow the controller's electrical safety and electrostatic-discharge precautions. Replacement is configuration-dependent; another supply listed in the same manual is not automatically interchangeable.
The manual lists dedicated power-supply harnesses and an end clamp for this assembly. Before service, identify the installed option and follow the controller's electrical safety and electrostatic-discharge precautions. Replacement is configuration-dependent; another supply listed in the same manual is not automatically interchangeable.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Power-supply service in OmniCore-controlled cells
ABB identifies automotive, logistics and general manufacturing uses for the OmniCore V-line. These are controller-family contexts; DSQC 634 applicability depends on the installed V400XT options, not the production sector alone.
-
01 · AUTOMOTIVE PRODUCTION
Supporting a configured robot controller
In an OmniCore-controlled automotive cell, DSQC 634 serves the documented optional ODVA power-supply function when fitted. It is not the robot's motor drive or a complete controller. -
02 · LOGISTICS AUTOMATION
Maintaining optional cabinet power
ABB lists logistics among V-line applications. A V400XT cabinet equipped with DSQC 634 requires the specified supply, harnesses and mechanical retention during maintenance; this does not establish compatibility with every logistics robot. -
03 · GENERAL MANUFACTURING
Diagnosing supply-output status
For a manufacturing cell with the documented V400XT option, the DC OK indicator helps technicians distinguish normal output status from an output-voltage or protection condition. Controller and circuit-diagram checks remain necessary before replacing the supply.
Technical specifications for 3HAC13398-2
-
Product Model3HAC13398-2
-
Product ParametersDSQC 634 power supply
-
In stock1 unit
-
ManufacturerABB
-
Documented controllerOmniCore V400XT
-
Cabinet option designationsT6 and T9, ODVA supply
-
24 V harness reference3HAC082083-001
-
Power-supply harness reference3HAC082508-001
-
End-clamp reference3HAB7983-1
-
Mechanical retentionHangs on bracket; lower section clicks into place
-
Status indicationDC OK green: outputs within specified voltage levels
-
ABB application spare-part levelL2
View all additional
Alternative Names
ABB DSQC 634
DSQC 634 ODVA power supply
3HAC13398-2 controller power supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
OMNICORE V400XT OPTIONAL SUPPLY
Identify the ODVA supply and its cabinet connections
ABB's OmniCore V400XT manual identifies DSQC 634 as the optional ODVA power supply at the documented T6 and T9 positions. This association is a controller-configuration reference, not approval for every OmniCore cabinet.
The installation table specifies the PSU 24V harness, PSU harness and end clamp. Consult circuit diagram 3HAC082020-008 for the installed arrangement instead of assigning terminals from another supply or robot controller.
The DC OK indicator reports output-voltage status. ABB warns that residual voltage can remain with the main switch off; installation and servicing require the complete electrical-safety, isolation and ESD precautions.
Features:
- Identify the installed V400XT option
- Check the correct harness references
- Retain the controlled circuit diagram
The ABB 3HAC13398-2 ODVA supply requires configuration-specific checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match both DSQC 634 and order number 3HAC13398-2. The manual's service table warns that spare-part numbers can change, so current ABB parts identification should be checked against the installed controller before ordering.
Follow the DSQC 634 procedure, including mains isolation, the specified waiting period and ESD protection. Release or engage the lower retaining mechanism as documented; instructions for DSQC 609 or DSQC 1102 are not automatically applicable.
No exact discontinuation date or unconditional successor was verified. After installation, reconnect the documented circuits and perform the specified functional tests before returning the robot cell to operation.
Features:
- Match DSQC 634 and the complete order number
- Use the DSQC 634-specific removal procedure
- Complete functional tests after refitting
The ABB 3HAC13398-2 ODVA supply replacement requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon is an independent supplier. Refer to the applicable ABB documentation and the installed equipment configuration before selection, installation or replacement.
Features:
- Exact-model reference documents
- Model and controller identity checks
- Accessories are supplied only when listed in the quotation
Documentation for the ABB 3HAC13398-2 supports document applicability checks before installation or replacement.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginOrigin unconfirmed
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3HAC13398-2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 3HAC13398-2 the DSQC 634 power supply?
Yes. ABB's OmniCore V400XT manual explicitly pairs 3HAC13398-2 with DSQC 634 and identifies its ODVA power-supply function. -
Does this part replace the complete robot controller?
No. It is an optional power-supply assembly within a documented OmniCore V400XT cabinet configuration, not the controller or the robot drive system. -
What does a green DC OK light indicate?
ABB states that green means all DC outputs are within their specified output-voltage levels. An unlit indication can mean an output-voltage condition or shutdown caused by short circuit or overload; diagnose the circuit before concluding that the supply is defective. -
Which harnesses are listed for DSQC 634?
The reviewed installation table lists 3HAC082083-001 for the PSU 24V harness and 3HAC082508-001 for the PSU harness. Verify the current cabinet circuit diagram; listing these accessories does not mean they are included with the spare. -
How is the power supply retained mechanically?
ABB instructs the technician to hang DSQC 634 on its bracket and push the lower part until it clicks into place. The removal procedure releases the lower buckle. Use the complete controlled procedure and the listed end clamp. -
Is switching the cabinet off sufficient before touching the supply?
No. ABB warns about residual voltage and prohibits touching the supply while DC OK is illuminated. The procedure requires mains disconnection and a three-minute wait, together with the controller's electrical-safety and ESD instructions. -
Can DSQC 609 or DSQC 1102 automatically replace DSQC 634?
No such universal substitution is established by their appearance in the same table. ABB provides separate procedures and option-specific parts; confirm an approved configuration or replacement decision before substitution. -
What checks follow refitting DSQC 634?
Reconnect the removed connectors under the controlled procedure, close the cabinet and perform ABB's specified functional tests to verify the safety features. Replacement does not eliminate the recommissioning checks.
READY TO VERIFY YOUR PART?
Get a 3HAC13398-2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
