Number of input channels: 24
Input Filter: Hardware filter, 4 ms
Input Signal Logic: Active High / Active Low
Input isolation in pack: 1500 V
Input Voltage Range: 5V DC / 24V DC
Ac voltage rejection: 60 V RMS
Isolation: Optical or Galvanic Isolation
Output Voltage Range: 5V DC – 250V AC
Contact Rating (Relay Output): 5A
Brand:GE Intelligent Platforms/GE Fanuc
Series:Series 90-30
Part Number:IC693MDL231
Product Type:Isolated Input Module
Voltage:240 V AC
Inputs:8
Frequency:50/60 Hz
AC Power:Yes
DC Power:No
LED Indicators:8
Series:Versamax
Manufacturer:Emerson Automation / GE Fanuc (former)
Part Number:IC200ALG264
Series:VersaMax
Type:Input Module
Channels:15 single ended, one group
Wiring configuration:Single-ended
Isolation:250VAC continuous; 1500VAC for 1 minute
No. of groups:1 group
LED Indicators:Yes OK LED
Compatible signals:4 to 20 mA / 0 to 20 mA
Resolution:15 bit
Diagnostics:Yes
External Supply Voltage Range:None
Input Currents:1 to 20 mA
Input Impedance:100 ohms
Backplane current:100 mA
Update rate:7.5 ms, maximum
Accuracy:0.3% typical, 1% maximum
Resolution:15 Bits
Current Draw:100 mA, maximum
Output 12/24VDC POS LOGIC 0.5A per point (2 groups of 16) 32 points
No. of channels:Thirty-Two (32)
Current per Point:0.5 Amperes
Output Voltage Range:+10.2 to +30VDC
No. of input groups:Two (2)
Backplane Current:90 milliamperes
Output voltage, nominal:12 / 24VDC
No. of channel per group:Sixteen (16)
Current Draw:90 mA, maximum
External Power supply:+10.2 to +30VDC
Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693PBM200
Product Description:Profibus Master Module
Communication interface:One (1) RS232 Service port; One (1) Profibus Master Port
Communication protocol:ProfiBus
No. of supported DP slave:125
Data rates:All standard data rates
Input data:244 Bytes
Output data:244 Bytes
Current draw:450mA @ 5VDC
Product Lifecycle Status:Discontinued/Obsolete
Operating temperature:0 to 60 degrees Celsius
Product Description:Analog input module
Number of Inputs:8
No of Channels:Eight (8) analog input
Input Type:Single-Ended
Analog input signal:Analog input signal
LED Indicators:2 (The "OK" and the "INT PWR" LED
Analog input resolution:12 bits
Voltage Type:Unipolar or Bipolar
Brand:GE Fanuc
Series:Versamax
Part Number:IC200MDL742
Product Description:Discrete Output Module
Number of Points:16 Outputs
Number of groups:2
Point to Point Isolation:None
Series:Versamax
Part Number:IC200MDL241
Description:Discrete Input Module
Operating Voltage:240 Volts AC
Backplane Current Rating:110 milliamps
Maximum Response Time (On):1 Cycle
Built-in Power:Yes
Number of Inputs:16 Discrete Inputs
Group Isolation:Yes
ON state Voltage:15-30 VDC
Filter time:0 ms, 1.0 ms, 7.0ms
OFF state voltage:0-5 VDC
Backplane Current Consumption:5 Volts, 50 milliamps
OFF state current:0-0.5 mA
On-state current:2.0 - 5.5 mA
Product type:Discrete Input Module
No. of input groups:Four (4)
Number of Points:32 Inputs
Input signal, nominal:24 VDC
