Power Supply:24V DC ±10%
Power Consumption:6W (typical)
Isolation:1500V AC
Range:4-20mA / 0-20mA
Resolution:16-bit
Accuracy:±0.05% of span
Load Capacity:≤750Ω
Update Rate:5ms per channel
Power Supply:24V DC ±10%
Power Consumption:4W (typical)
Isolation:1500V AC
Range:4-20mA / 0-20mA
Resolution:16-bit
Accuracy:±0.1% of span
Load Capacity:≤750Ω
Update Rate:10ms per channel
Power Supply:24V DC ±10%
Analog Input:4-20mA / 0-10V
Digital Output:Relay, 5A @ 250V AC
Overcurrent:5-100A
Ground Fault;1-10A
Protocol: Modbus RTU (RS-485)
Baud Rate: 1200-19200 bps
Processor:Dual-core PowerPC @ 800MHz
Memory:64MB Flash, 32MB RAM
Control Loops:Up to 128 PID loops
Ethernet: 2x 10/100BASE-T
Serial: 1x RS-485
Fieldbus: PROFIBUS DP
Digital Input:24V DC
Digital Output:Relay, 2A @ 30V DC
Analog Input:4-20mA/0-10V
Analog Input:4-20mA
Digital Input:24V DC, 3mA
Analog Accuracy:±0.1% of span
Digital Isolation:1500V AC
Update Rate:10ms (all channels)
Power Supply:24V DC ±10%
Power Consumption:8W (max)
Backplane Interface: S800 I/O bus
Power Supply:24V DC ±10%
Power Consumption:6W (max)
Isolation:1000V AC
Range:4-20mA
Resolution:16-bit
Accuracy:±0.05% of span
Input Impedance:250Ω
Update Rate:10ms/channel
Power Supply:24V DC ±10%
Power Consumption:8W (max)
Current:0-20mA/4-20mA
Voltage:0-10V/±10V
RTD:Pt100/Pt1000
Sampling Rate:50Hz/channel
Common Mode Rejection:>120dB @ 50/60Hz
Normal Mode Rejection:>60dB
Input Impedance:250Ω (current)
Operating Voltage:Typically 24V DC
Analog:0-10V
Digital :CANbus/DeviceNet
Current Consumption:<100mA
Degrees of Freedom:2 or 3 axes
Handle Material:Industrial-grade plastic/metal
Mechanical Life:>1 million cycles
Operating Force:3-10N
Power Supply:24V DC ±10%
Power Consumption:5W (typical)
Isolation:1500V AC
Protocol:PROFIBUS DP
Data Rates:9.6kbps - 12Mbps
Address Range:0-125
Response Time:<1ms
Power Supply:24V DC ±10%
Power Consumption:4W (typical)
Isolation:500V AC (channel-to-channel)
Backplane Current:100mA (max)
Output Voltage:24V DC
Output Current:0.5A per channel
Switching Frequency:Up to 100Hz
Power Supply:24V DC ±10%
Power Consumption:5W (max)
Isolation:500V AC
Backplane Current:120mA (max)
Output Type:Solid-state
Output Voltage:24V DC
Output Current:0.5A per channel
Switching Frequency:Up to 100Hz
Leakage Current:<1mA
Power Supply:24V DC ±10%
Power Consumption:3W (typical)
Backplane Current:80mA (max)
Update Rate:10ms
Input Type:Sink/Source (configurable)
Input Voltage:12-60V DC
Threshold Voltage:8V DC (ON), 5V DC (OFF)
Input Current :3mA @ 24V DC
Response Time:<1ms
Isolation:1500V AC
Input Voltage:400-480V AC 3-phase (50/60Hz)
Control Voltage:24V DC ±10%
Main Circuit Breaker:80A (adjustable)
Short Circuit Rating:65kA @ 480V AC
Power Consumption:≤500W
Power Supply:24V DC ±10%
Power Consumption:5W (typical)
Current:4-20mA/0-20mA
Voltage:0-10V/±10V
RTD :Pt100
Sampling Rate:10ms/channel
Common Mode Rejection:>100dB @ 50Hz
Input Impedance:250Ω
Power Supply:24V DC ±10%
Power Consumption:5VA (max)
Isolation:2kV AC (input-to-output)
Voltage Input:0-690V AC
Current Input:0-5A AC (via CTs)
Frequency Range:45-65Hz
Input Impedance:>1MΩ (voltage)
Analog Outputs:2x 4-20mA
Accuracy:±0.5% of span
Load Capacity:≤500Ω
Model: KUC755 AE106
Order/Part Number: 3BHB005243R0106
Description: Gate Power Unit
Input Voltage: Typically 24V DC
Output Gate Drive Voltage: ±15V to ±20V
Output Current: Up to 5A peak
Isolation Voltage: ≥2500V AC
Supply Voltage: 24V DC
Power Consumption: <5W
Part Number: 3BHB006943R0002
Supported Languages: Multiple
Alternative Designation: UNS0885A-Z, V2
Description: Display and control interface board
Input Voltage Range:85–264V AC
Frequency Range: 47–63Hz
Inrush Current: ≤20A
Efficiency: ≥90%
Output Voltage: 24V DC
Output Current: 5A
Power Rating: 120W
Overload Protection: 105–150% of rated current
Low operating cost
Compact design
For SIL2 safety loops
Mechanical position indicator
Well-proven technology and intelligence
Robust and environmentally ruggedized
ATEX, FM, CSA, GOST and IECEx approvals
Wide operating temperature range -40 ... 85 °C
3-phase: 380-500V AC
1-phase: 200-240V AC
Frequency Range: 47-63Hz
DC Bus Voltage: 510-620V DC
Rated Power: 11kW
Overload Capacity: 150% for 60 seconds
Inrush Current Protection: <25A for 10ms
Efficiency: >95%
Undervoltage Lockout: <300V DC input
Input Voltage Range:380-500V AC
Optional: 200-240V AC
Frequency Range: 47–63Hz
Inrush Current Protection: <30A
Output Voltage: 24V DC
Rated Current: 10A
Power Rating: 240W
Ripple Noise: <100mV peak-to-peak
Overload Capacity: 150% for 5 seconds
Supply Voltage: 24V DC ±10%
Power Consumption: 15W typical
Isolation: 2.5kV input-to-output
PWM Frequency: 2-16kHz
Analog Inputs:4 channels
Digital Inputs:8 channels
Power Range: 0.5-800kW
Max Motor Speed: 6000 rpm
Voltage: 5-15V DC
Frequency: Up to 10kHz
Pulse Voltage: 24V DC
Peak Current: 2A
Pulse Width: 60-120μs
Input-to-output: 4kV AC
Channel-to-channel: 2kV AC
Operating Voltage: 220V AC ±15%
Power Consumption: 15W max
Backup Power: Optional 24V DC input
Module Type:High-capacity IGBT Kit
Configuration: Dual-switch structure
Voltage Rating: 3300V/4500V
Current Rating: 1600A-3000A
Switching Speed:<150ns turn-off time
Power Class: ≥5MW
Series: CP-C
Model: 24/20.0
Type: Industrial switching power supply
Power Rating: 480W
Output Voltage: 24V DC ±1%
Input Voltage Range:100-240V AC (47-63Hz)
Inrush Current: <20A
Power Factor: >0.95 at full load
Efficiency: Up to 93%
Typically 24V DC or 12V DC
Output Type Source
Load Voltage 15 30 VDC Maximum
On-State Voltage 24 V (typ), load current @ 0.5A
Off-State Leak Current 5.0 µA (max)
Turn-On/Turn-Off Time 10 ms (max)
Voltage: 24 V DC
Power Consumption: ≤ 5 W
Serial Ports: RS-232/RS-485
Ethernet Port: 10/100 Mbp
Fieldbus Support: Profibus DP
Processor: 32-bit RISC-based
Flash Memory: 16 MB
Data Throughput: Up to 10,000 signals
Ethernet: 10/100 Mbps
Serial (RS485): 300–115,200 bps
Input Voltage: 24V DC
Power Consumption: 4W
Isolation: 2.5 kV AC
Processor: 32-bit ARM
Digital Inputs: 24V DC
Supply Voltage: 24V DC (±10%)
Power Consumption: ≤8W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs: 5A, 250V AC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz
Input Voltage:110/125/250V DC
Range: 88–300V DC
Inrush Current: ≤20A
Output Voltage: 24V DC
Output Current: 5A continuous
Ripple Noise: <100mV peak-to-peak
Isolation: 3kV AC
Overvoltage: Clamping at 28V DC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz
Operating Voltage: 24V DC (±10%)
Power Consumption: ≤6W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs:5A, 250V AC / 30V DC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz
Operating Voltage: 24V DC
Power Consumption: ≤5W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs:5A, 250V AC / 30V DC
Operating Voltage:24V DC (±10%)
Power Consumption:≤5W
Isolation:1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Signal Latency:<1ms (digital I/O)
Analog Accuracy:±0.1% FSR
Encoder Supply:5V DC ±5%, 500mA max
Environmental Noise Immunity:>1500V/m
Voltage: 48-250V DC
Frequency: 50/60Hz (±10%)
Power Consumption: 15W typical
Binary Inputs:24-250V DC
Analog Inputs:4-20mA or ±10V
Relay Outputs:5A, 250V AC/30V DC
Processor: 32-bit dual-core CPU
Sampling Rate: 4kHz
Supply Voltage: 24V DC
Power Consumption: 8W typical
Isolation: 2.5kV AC
Analog Inputs:8 channels
Resolution: 16-bit
Range: ±10V or 4-20mA
Accuracy: ±0.1% of full scale
Digital I/O:16 digital inputs
Sampling Rate: 4kHz per channel
Memory:256MB Flash
Input Voltage:24-250V DC
Number of Outputs:8 independent relays
Contact Type:Form A (SPST-NO)
Contact Rating:5A @ 250V AC / 30V DC
Max Switching Power:1250VA / 150W
Isolation:4kV RMS
Voltage: ±10V DC
Current: 4-20mA
Resolution: 16-bit
Accuracy: ±0.1% of full scale
Sampling Rate: 4kHz per channel
Voltage Range: 24-250V DC
Isolation: 2.5kV RMS
Relay Contacts: 5A @ 250V AC
Input Voltage: 24V DC (±10%)
Power Consumption: 6W typical
Isolation: 2.5kV AC
Range: ±10V or 4-20mA
Resolution: 16-bit
Accuracy: ±0.1% of full scale
Digital I/O:24V DC
Processor: 32-bit ARM Cortex-M4
Number of Inputs:16
Input Voltage:24-250V DC
Input Current :2-10mA per channel
Isolation:2.5kV RMS
Number of Outputs:8
Contact Rating:5A @ 250V AC / 30V DC
DC Output Voltage:24V DC (±1%)
Output Current:40A (continuous)
Power Rating:960W (max)
Efficiency:>90% (at full load)
Input Voltage:3-phase 200-480V AC (±10%)
Frequency:50/60Hz (±5%)
Input Current :10A (max @ 400V AC)
Inrush Current:30A (peak, for 10ms)
Input Voltage: 24 VDC (±10%)
Analog Inputs: 0–10 VDC or 4–20 mA
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing.
Vibration Resistance: 5–150 Hz
Power Supply: Typically 24 V DC
Input Voltage Range: typically 0-10V DC
Operating Temperature Range:
Typically -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range:
Typically -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95%, non-condensing
