Freescale™ QorIQ P4080 –
8-core CPU @ 1.5GHz
Serial Rapid IO, PCIe
and 1/10GbE fabrics
Fast dual-channel memory
(up to 8 GB RAM with ECC)
Useable in managed (with MCH)
and unmanaged (without MCH) systems
FLOWMETER MASSFLO
MASS 3000
115/230VAC/ENCLO-IP00
Gas Flow: 0.01 to 1000 kg/h
Liquid Flow: 0.1 to 1000 kg/h
Typical Accuracy: accuracy of ±0.5% of readin
Standard Temperature Range: -40°C to +150°C
Operating Pressure:0 to 100 bar
Analog Output:4-20 mA
Voltage Range: 24 V DC
R/I TRANSMITTER 24VDC 0-20MA
Input for Pt100, Ni100 or Ohm
Sensor cable compensation
Linearised analogue output
24 VDC or universally supplied
Individual 0 and 100% adjustment
DIN rail mounting on a standard 11-pole relay socket
Configuration: Non-isolated thermocouple input
Linear range: 4 to 20 mAdc
Current Output limits: <2 to >40 mA (open TC)
Compliance (supply-voltage): 8 to 50 Vdc
Reverse polarity protection: 350 V peak
Maximum loop resistance: (Supply Voltage - 8V)/20 mA
AC Power:100-240 V AC.
Max. Monitor Connections: 4 indoor monitors
Power Consumption:20-40W
Operating Temperature:
Typically, 0°C to 40°C (32°F to 104°F).
Humidity:
Typically up to 80% relative humidity
Range of Product:Altivar 312
Motor power kW:0.37 kW
Maximum Horse Power Rating:0.5 hp
Supply frequency:50...60 Hz - 5...5 %
EMC filter:Integrated
Apparent power:1 kVA
Maximum transient current:5 A 60 s
Power dissipation in W:41 W at nominal load
Speed range:1…50
Processor Model: PowerPC 600 series
Clock Speed: 200 MHz and 500 MHz
Memory Capacity: 64 MB to 1 GB
Memory Interface: 32-bit or 64-bit
Ethernet: 10/100/1000 Mbp
Input Voltage: 5 V to 12 V DC
Frequency coverage:136–174MHz
Number of channels:Max. 128 Ch/ 8 zones
Channel spacing:12.5/25kHz
Type of emission:16K0F3E, 11K0F3E
Current drain:10.0A
Max. audio:0.7A
Stand-by:250mA
Part Number/Catalog No.:2080-IF2
Product Type:Analog Plug-in Module
Module Type:Analog
Number of Single-Ended Inputs:2
Data Range:0-65535
Repeatability:+/- 0.1%
Update Time:180ms per Enabled Channel
Operating Altitude:2000m
Part Number/Catalog No.:2080-IF4
Product Type:Analog Plug-in Module
Module Type:Analog
Number of Single-Ended Inputs:4
Analog Normal Operating Voltage Range:0-10V DC
Analog Normal Operating Current Range:0-20mA
Data Range:0-65535
Repeatability:+/- 0.1%
Part Number/Catalog No.:2080-OF2
Product Type:Analog Plug-in Module
Number of Single Ended Outputs:2
Analog Normal Operating Voltage Range:10V DC
Repeatability:+/- 0.1%
Series:Micro870
Part Number:2080-L70E-24QBB
Product Type:Programmable Controller
CONTROLLER
PROGRAMMABLE
MICRO 820
12 INPUTS
24 VOLT DC
8 OUTPUTS: 7 RELAY AND 1 ANALOG
0 - 10 VOLT DC
4 ANALOG INPUTS
0 - 10 VOLT DC INPUT
SHARED WITH DC INPUTS
FIXED TERMINALS
Input Voltage: 24V or 120V AC/DC
Input/Output: Multiple I/O interfaces
Operating Temperature: -20°C to +70°C
Humidity: humidity of up to 95% (non-condensing)
Excellent spectral uniformity of ± 0.1 dB
100 dB maximum attenuation
Monitor output option
Ultra-low insertion loss
Ideal for BER testing
Singlemode and multimode
Card type PCIe x16
Graphics memory :128 MB DDR2
Form factor (card/bracket) :ATX/ATX
Carddimensions1:6.6” x 4.38” / 16.76 x 11.13 cm
Connectors :DVI-I x 2
Connector adapters :2 DVI-I to HD15
Max displays per card :2
Process Temperature Range:
-40°C to +150°C (-40°F to +302°F)
Process Pressure Range:
-1 to +40 bar (-100 to +4000 kPa)
Output Signal: 4…20 mA/HART
Power Supply: 14…36 V DC
Protection Rating: IP66/IP68 (0.2 bar)
Wetted Materials: Stainless Steel (1.4435)
Probe Length: Up to 9,000 mm
Rated insulation voltage AC 800 V
Rated impulse voltage/pollution degree 8 kV/3
Nominal system voltage Un AC, 3/(N)AC 0…793 V
Supply voltage USAC 88…264 V
Frequency range US 42…460 Hz
Supply voltage US DC 77…286 V
Frequency range US 42…460 Hz
Sensor: CMOS
Resolution: 26 Megapixels
Pixel Size: Typically 3.45 µm
Operating Temperature: -10°C to +50°C
Storage Temperature: -20°C to +60°C
Power Supply: 12V DC
Product or component type:Communication module
Product compatibility:Lexium 32M
Accessory / separate part destination:Servo drive
Number of addresses:256
Electrical connection:2 connectors RJ45
4 LEDs (green/red) for communication status
Range compatibility:PacDrive 3
Device short name:SH3.....P
Product or component type:Servo motor
Maximum mechanical speed:8000 rpm
rated supply voltage:115...480 V
Network number of phases:Three phase
Continuous stall torque:1.25 N.m at 115...480 V three phase
Continuous power:690 W
Maximum current Irms:5.7 A
Maximum mechanical speed 8000 rpm
rated supply voltage 115...480 V
Continuous stall current 2.9 A
Continuous power 1130 W
Speed feedback resolution 128 periods
Torque constant 0.7 N.m/A at 120 °C
Back emf constant 48 V/krpm at 20 °C
Maximum axial force Fa 80 N
Acceleration Range: ±2g, ±5g, ±10g, or ±50g
Voltage output, typically 0-5V or 0-10V
Supply Voltage: 5V DC or 12V DC
Operating Temperature: -40°C to +85°C
Universal Input Output IOTA
Input Channels 1 16 Channels
Common Mode Voltage, dc to 60 Hz -6 to +5 V peak
A/D Converter Resolution 16 bits
Normal Mode Rejection Ratio, at 60 Hz 19 dB
Normal Mode Filter Response Single-pole RC, -3 dB @ 6.5 Hz
Input Impedance (voltage inputs) > 10 M Ω powered
Input Scan Rate 50 ms
Supports fiber-optic medium
NFPA Class B or Class A operation
Data is immune to all environmental noise
Optical isolation prevents ground loops
High-Speed NFN fiber-optic medium
Fiber type: 62.5/125 micrometers (multi-mode);
50/125 micrometers (multimode),
or 9/125 micrometers (single mode)
Maximum attenuation: 10 dB with 62.5/125 μm cable, 6
Module Type:Central Processing Unit
Number of Slots:1 (Single slot)
Battery-backed memory: 1 Mbyte
Number of Points:12K discrete inputs and outputs
Serial Ports:1 (RS422/485 compatible)
Current Required:3.3 Amps nominal
Device short name:BMH
Maximum mechanical speed:8000 rpm
Range compatibility:Lexium 32
rated supply voltage:240 V
Continuous stall current:5.55 A
Continuous power:1.68 W
Maximum permanent current:17.84 A
Holding torque:3 N.m holding brake
Torque constant:0.61 N.m/A at 120 °C
Back emf constant:39.3 V/krpm at 120 °C
Range Compatibility:PacDrive 3
Maximum mechanical speed:9000 rpm
Continuous stall current:0.73 A
Continuous power:290 W
Maximum current Irms:2.9 A
Speed feedback resolution:128 periods
Torque constant:0.58 N.m/A 248 °F (120 °C)
Back emf constant:40 V/krpm 68 °F (20 °C)
Power Supply:24VDC
No. of Inputs:(10) 24V dc; (4) fast 24V dc
Input Circuit Type:24 VDC
Output Circuit Type Relay; FET
Relay Contact Rating:24-125VDC; 120-240VAC
Power Supply Usage:82 VA
Input Power:24V DC
Inputs:(10) 24V DC and (4) Fast 24V DC
Type:FT color
Diagonal:10.4" (264 mm)
Resolution:VGA, 640 x 480 pixels
Buffer time:10 min
Variant:Lithium ion
Clock frequency:266 MHz
L1 cache:16 kB
Flash:2 MB (for firmware)
Cooling:Passive via heat sink
Mode/Node switches:2, 16 positions each
Accuracy At 25°C: Typ. 10 ppm (1 second) per day
Controller:SMC
Range of measurement: from 100N to 2kN
Accuracy class: 0.5%
Corrosion resistant
STRAIN AND FORCE SENSOR
TR FORCE TRANSDUCER FOR
MEASURING SPINDLES TENSION
Range Compatibility PacDrive 3
Device short name SH3.....P
Maximum mechanical speed 8000 rpm
rated supply voltage 115...480 V
Continuous stall current 1.8 A
Continuous power 690 W
Maximum current Irms 5.7 A
Speed feedback resolution 128 periods
Series Type:Low-inertia
Voltage Class:400 Volts AC
Frame Size:63 millimeters
Magnetic Stack Length:3 inches
Rated Speed:7000 rpm
Feedback:Multi-turn high-resolution encoder
Shaft Key/Seal:Shaft key/no shaft seal
Brake:24 Volts DC brake
Connector DIN 41612, type F, 48 pin
Supply voltage 24 VDC nominal
Voltage range 20 . . . 32 VDC
Current approx. 200 mA
Reference voltages ± 15 V (± 5 %) Ø 50 mA
Current 0 . . . + 20 mA
Current + 4 . . . + 20 mA
Output voltage 24 V PWM for the solenoid
Dither frequency 100 Hz, 150 Hz, 250 Hz
GENERATOR CONTROLLER
ANALOG INPUT: 0-5 VDC OR 4-20 MA DC
DISCRETE INPUTS (16):
5 MA EACH WHEN CLOSED TO SWITCH COMMON
(TERMINAL 65)
MAXIMUM 80 MA TOTAL
POTENTIAL TRANSFORMER INPUT: 150 VAC MAX
AC: 100-240V AC
Frequency: 50/60 Hz
Output Voltage: 24V DC
Output Current:10-15A
Operating Temperature Range:-20°C to 70°C
Storage Temperature Range:-40°C to 85°C
Conductivity range: 0.001 μS/cm to 2000 mS/cm
Temperature range: -10°C to 110°C (14°F to 230°F)
Analog output: 4-20 mA
Input voltage: 24 V DC
Power consumption: 15 W
Operating Temperature: -10°C to 60°C (14°F to 140°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
CE-compliant, not conformally coated
Redundancy not supported
Input Channels: 8
Input Scan Rate: 32 samples per second
Available Input Types:
Rectangular
Sine Wave
Series:POINT I/O
Module Type:Digital Contact Module
Series:POINT I/O
Outputs:4 N.O relay
Product Description Four (4) channel Relay output module
POINTBus Current 80 milliamps
No. of outputs Four (4) Normally Open (N.O.) contact outputs
Power Dissipation, Max;0.5 Watts
Output delay time, on to off, max:26 ms
Thermal Dissipation:1.7 BTU/hour
Contact resistance, initial:30 m
Thermal Dissipation:10 BTU/hour
Isolation Voltage:50 Volts Continuous
Inrush Current 6 amps for 10 milliseconds
Overvoltage Protection:Reverse Polarity
Power Supply Current:10 amps
Power Consumption:9.8 Watts
Field Power:24 Volts DC
Module Type;Expansion Power Supply
Series:POINT I/O
Part Number IC695ETM001
Specialty ModuleRX3i Ethernet module
10/100 Mbits 2 RJ45 connections one IP
address occupies one slot on system base
Current Consumption
840 mA @ 3.3 VDC; 614 mA @ 5 VDC
Operational NotesUniversal Backplane Only.
Uses PCI Bus. Client/Server
Number of Channels: 8 digital output channels
Output Voltage Range: 24 VDC ± 20%
Output Current: Maximum 1 A per channel
Power Supply Voltage: 24 VDC
Communication Interface:
Dual RBUS for high-speed data transfer
Power Supply Voltage:
10 to 28.8 VDC from SPBus
Operational Temperature Range: -15°C to +70°C
Storage Temperature Range: -25°C to +70°C
Relative Humidity: Up to 98%
Number of channels: 32 current inputs
Current input: 0-20 mA (input resistor 220 ohm)
Current accuracy: +/- 0.2% of full scale
(resistor accuracy = 0.1%)
Current input lter: RC = 33 µs
Digital resolution: 12 bits
Connectors: screw terminals, 2.5 mm
Input voltage: 24 VDC ±20%
Power consumption: maximum 20 W
Connectors: screw terminals, 1.5 mm
operational: 0° C to 70° C
storage: -25° C to 70° C
Power supply voltage: 10 to 28.8 VDC
SPBus connector: 9-pin male DSUB
Input voltage: 24 VDC ±20%
Power consumption: maximum 20 W
Connectors: screw terminals, 1.5 mm
operational: 0° C to 70° C
storage: -25° C to 70° C
Power supply voltage: 10 to 28.8 VDC
SPBus connector: 9-pin male DSUB
Input supply voltage: 24 VDC(+30%, -25%)
Nominal current consumption: ≈ 0.8 A
Start-up current: Max. 2.7 A
Power consumption: Max. 20 W
Heat dissipation: Max. 20 W
Voltage input range: 0-4 V, 0-10 V
Input resistor to ground: 3 MΩ
Current input range: 0-20 mA
Automatic protection: 26 m
AInput resistor to ground: 150 Ω ±1 %
Measurement accuracy: ±0.15% of full scale
Series: MAK 9
Voltage Rating: Typically24V DC.
Operating Temperature Range:
0°C and 60°C(32°F to 140°F)
Storage Temperature Range:
-20°C and 70°C (-4°F to 158°F)
Operating Voltage: 120/240 V AC
Input Power Frequency: 50/60 Hz
Input Voltage Range: 100–250 V AC
Operating Temperature Range:
Typically 0°C to 50°C (32°F to 122°F)
Storage Temperature Range:
-10°C to 60°C (14°F to 140°F)
Humidity Range:
10% to 90% relative humidity (non-condensing)
