190501 Series

Velomitor CT Transducer

1 2 Plate Stud 3/8-in 24 to M8x
0 0 MIL-C-5015 connection interface
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%
Frequency Response:3.0 Hz to 900 Hz
DynamicOutputImpedance:<400 Ω typical

Velomitor CT Transducer

0 1 Stud 3/8-in 24 to 3/8-in 24
0 0 MIL-C-5015 connection interface
0 0 No Approvals

190501 Velomitor CT Transducer

0 7 Plate Stud 3/8-in 24 to 3/8-in 24
0 0 MIL-C-5015 connection interface
0 4CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)

Velomitor CT Transducer

0 0 No stud
0 0 MIL-C-5015 connection interface
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%.
FrequencyResponse:3.0 Hz to 900 Hz
DynamicOutputImpedance:<400 Ω typical

Velomitor CT Velocity Transducer

0 4 Stud M6x1 with 3/8-in 24 adapter
0 0 MIL-C-5015 connection interface
0 4 ATEX/IECEx/CSA 
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%.
DynamicOutputImpedance:<400 Ω typical

Velomitor CT Velocity Transducer

0 1 Stud 3/8-in 24 to 3/8-in 24
0 0 MIL-C-5015 connection interface
0 4CSA/NRTL/C

Velomitor CT Velocity Transducer

0 8 Plate Stud 3/8-in 24 to 1/2-in 20
0 0 MIL-C-5015 connection interface
0 0 No Approvals
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%
DynamicOutputImpedance:<400 Ω typical

Velomitor CT

Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%.
FrequencyResponse:3.0 Hz to 900 Hz (180 to 54,000cpm) ±1.0 dB
TemperatureSensitivity:-8% to +5% typical over theoperating temperature range
TransverseResponse:Less than 5% of the axialsensitivity.
Output BiasVoltage:10.1 Vdc ± 1.0 Vdc, Pin Areferenced to Pin B 

Velomitor CT Transducer

0 1 Stud 3/8-in 24 to 3/8-in 24
0 0 MIL-C-5015 connection interface
0 1 through CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)

Velomitor CT Transducer

Low-Frequency
Measures Casing Vibration Velocity
Compatible with Cooling Towers and 
Air-Cooled Heat-Exchanger Fan Assemblies

Velomitor CT Transducer

1 0Plate Stud M6x1 to 
M6x1with 3/8-in 24 adapter
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%
Amplitude Linearity:±2% to 63.5 mm/s pk(2.5 in/s pk)
Dynamic OutputIm pedance:<400 Ω typical

Velomitor CT Transducer

0 7 Plate Stud 3/8-in 24 to 3/8-in 24
0 0 MIL-C-5015 connection interface
0 0 No Approvals
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%
AmplitudeLinearity:±2% to 63.5 mm/s pk(2.5 in/s pk)

Velomitor CT Velocity Transducer

1 2 Plate Stud 3/8-in 24 to M8x1
0 0 MIL-C-5015 connection interface
0 1 through0 4CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)

Velomitor CT Velocity Transducer

0 7 Plate Stud 3/8-in 24 to 3/8-in 24
0 0 MIL-C-5015 connection interface
01 CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)
MountingSurface33 mm diameter (1.3 indiameter).
CaseMaterial 316L stainless steel