Bulletin Number:PowerFlex 753 AC Drive,
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:15.4 Amps, 7.5kW ND, 5.5kW HD
Enclosure Type:Open Type/Frame 1
Input Type:AC Input with DC Terminals
Frame Size:Frame 1
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:15.4 Amps, 7.5kW ND, 5.5kW HD
Enclosure Type:Open Type/Frame 1
Input Type:AC Input with DC Terminals
Frame Size:Frame 1
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Communication port protocol:Modbus Plus
Communication port type:Single
rated supply voltage:5 V DC
Input voltage tolerance:+/- 5 %
Supply:Via I/O base
Clock drift+/- 13 s/day accuracy
Battery size2/3 AA
Series:ControlLogix
Channels:8 Isolated Channels
Module Type:Analog Input
I-O Ranges:0-10 Volts
Inputs:8-Points, Isolated ,
Any combination of Voltage or Current mode
Conversion Method:Sigma-Delta
Current Draw (5.1 Volts):200 milliamps
AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP20
OPEN TYPE
400 VAC / 540 VDC
7.5 KW / 10 HP
15.4 AMP
FILTERING
JUMPER REMOVED
INTERNAL TRANSISTOR
NO HIM
PowerFlex 753 AC Drive
with Embedded I/O
Air Cooled AC Input with DC Terminals
Open Type/Frame 1
400V AC, 3PH, 11.5A
5.5kW Normal Duty
4kW Heavy Duty
Frame 1, Filtered
CM Jumper Removed
DB Transistor, No HIM
Voltage Class:600 AC Volts
Output Current:52 Amperes
Phase Count:Three
Frame Size:5
Enclosure Type:IP00 (IP20 NEMA)
EMC Filtering Options:Filtered, No CM Jumper
Input Type:AC Input with DC Terminals
Dynamic Breaking:DB Transistor
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:5 Amps,
(Fr1 3HP ND, 2HP HD/Fr2 3HP ND, 3HP HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:3.4 Amps,
(Fr1 2HP ND, 1.5HP HD/Fr2 2HP ND, 2HP HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:2.1 Amps,
(Fr1 1HP ND, 0.5HP HD/Fr2 1HP ND, 1HP HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:96 Amps, 75HP ND, 60HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 5
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
2-conductor twisted
shielded 22AWG (0.5 mm2) cable
with 2-socket moisture-resistant femaleconnector at one end
terminallugs at the other end
(used withmonitors or vibration datacollectors)
Cable operating temperature is-50˚C to 120˚C
Minimum length of 2.0 ft (0.6 m)
maximum length of 99 ft (30 m)
Input/Output: 4–20 mA
Resolution: 12–16 bits
Typical Accuracy: ±0.1% of full scale at 25°C.
Temperature Drift: ±0.02% per °C
Voltage: 24 VDC nominal
Power Consumption: ≤5 W
Channel-to-Channel Isolation: ≤1500 VDC
Operating Temperature: -40°C to +85°C (-40°F to +185°F).
Humidity: 0–95% non-condensing.
Vibration Resistance: 5–2000 Hz, 5 g RMS
35 dBA Rating
Synchronous Drive
Direct-shaft Mount with Singlescrew Coupler
Magnetic Clutch
Jumper-selectableRotation Direction
Adjustable Rotation Stops
1/2 in. NPT Threaded ConduitOpening
Manual Gear Release
Output Position Feedback
Bulletin Number:PowerFlex 753 AC Drive,
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:77 Amps, 60HP ND, 50HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 5
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:65 Amps, 50HP ND, 40HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 4
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:52 Amps, 40HP ND, 30HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 4
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:40 Amps, 30HP ND, 25HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 3
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:34 Amps, 25HP ND, 20HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 3
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:27 Amps, 20HP ND, 15HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 3
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:22 Amps, 15HP ND, 10HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive, with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:480 VAC, 3 PH
Output Current:14 Amps, 10HP ND, 7.5HP HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered,
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
3300 XL 8 mm Probe
M10 x 1 thread,with armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector with connectorprotector
FluidLoc cable
00 Not required
3300 XL 8 mm Probe
M10 x 1 thread,with armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector with connectorprotector
FluidLoc cable
00 Not required
3300 XL 8 mm Probe
M10 x 1 thread,with armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector with connectorprotector
FluidLoc cable
00 Not required
3300 XL 8 mm Probe
M10 x 1 thread,with armor
10 1.0 meter (3.3 feet)
11Miniature coaxial ClickLocconnector with connectorprotector
FluidLoc cable
00 Not required
Power Dissipation:2.0 Watt/6.8 BTU/hour
POINTBus Current:75 mA
Output Voltage:24 Volts DC
Module Type:Digital DC Sourcing Output
Series:POINT I/O
Part Number/Catalog No.:1734-OB8
No. of outputs:8; Sourcing output
Output Voltage range:10-28.8VDC
Rated Voltage:5V DC
PowerConsumption:0.7W (Max)
AmbientTemperature:0oC to 50oC
StorageTemperature:-10oC to +60oC
TRANSFER/PROGRAMMING CABLE
USB: HMI USB
TYPE A
PORT TO PC USB TYPE A PORT
Gain Resolution:32- bit floating point
Absolute Position range:230,000 LDT counts
Rate:500Hz to 4kHz (Selectable)
LDT Input:PWM, Start/Stop rising or falling edge
Registration input:Optically isolated, current sinking input
Analog output:±10V dc
Analog output resolution:16 bits
Discrete outputs:Solid-state isolated relay contacts
Discrete output operating voltage:24VDC, Nominal.
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:5 Amps,
(Fr1 2.2kW ND, 1.5kW HD/Fr2 2.2kW ND, 2.2kW HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:3.5 Amps,
(Fr1 1.5kW ND, 0.75kW HD/Fr2 1.5kW ND, 0.1.5kW HD)
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:2.1 Amps,
(Fr1 0.75kW ND, 0.37kW HD/Fr2 0.75kW ND, 0.75kW HD)"
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 2
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:104 Amps, 55kW ND, 45kW HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 5
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
HIMBlank (No HIM)
Bulletin Number:PowerFlex 753 AC Drive,
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:85 Amps, 45kW ND, 37kW HD
Enclosure Type:Open Type
Input Type:AC Input with DC Terminals
Frame Size:Frame 5
EMC Filtering Options:Filtered, CM jumper installed (preferred)
Dynamic Braking:DB Transistor
PowerFlex 753 AC Drive
with Embedded I/O, Standard Protection
Forced Air, AC Input with DC Terminals
Open Type, 72 Amps, 37kW ND
30kW HD, 400 VAC, 3 PH, Frame 4
Filtered, CM jumper installed (preferred)
DB Transistor, Blank (No HIM)
PowerFlex 753 AC Drive
with Embedded I/O, Standard Protection
Forced Air, AC Input with DC Terminals
Open Type, 60 Amps, 30kW ND
22kW HD, 400 VAC, 3 PH, Frame 4
Filtered, CM jumper installed (preferred)
DB Transistor, Blank (No HIM)
Manufacturer:Rockwell Automation
Brand:Allen-Bradley
Part Number/Catalog No.:1762-L24BWAR
Input Power:120-240V AC
Inputs:(10) 24V DC and (4) Fast 24V DC
Outputs:(10) Relay
Channels: 16 digital channels
Input Type: 24 VDC
Isolation:500 VDC
Update Rate: ≤10 ms
Power Consumption: ≤5 W
Operating Temperature: -40°C to +70°C (-40°F to +158°F).
Humidity: 5–95% non-condensing.
Input Voltage: 24 VDC (±10%)
Output Voltage: 24 VDC
Current Capacity: Typically up to 5A
Operating Temperature: -40°C to +70°C (-40°F to +158°F).
Humidity: 5–95% non-condensing
Voltage Rating: 3.3 kV, 6.6 kV
Control Voltage: 24 VDC
Power Consumption: <20 W
Operating Temperature: 0°C to +55°C
Humidity: Up to 95% RH (non-condensing)
Series:RX3i PacSystem
Part Number:IC695CPE330-AFAT
Product Type:CPU module
Processor Clock Speed:1.0 Ghz
RAM:64 MB
NVRAM:64MB
I/O Points:up to 32 K I/O
Controller Redundancy:Supported
Maximum Program Blocks:512
Maximum Block Size:128 kilobytes
S-Series AO 4-20 mA HART 8-Channel
Local Bus Power 12 VDC at 150 mA
Bussed Field Power 24 VDC at 300 mA
Field Circuit24 VDC at 23 mA/Channel
Ambient Temperature -40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
S-Series AO 4-20 mA HART 8-Channel
Local Bus Power 12 VDC at 150 mA
Bussed Field Power 24 VDC at 300 mA
Field Circuit24 VDC at 23 mA/Channel
Ambient Temperature -40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
Input Power Rating 30 VDC @ 1 A
AmbientTemperature-40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2 Hz
0.7 g from 13.2 to 150 Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
Relative Humidity 5 to 95% non-condensing
ANALOG MODULE
2 WIRE/16CHANNEL
4-20MA
SERIES 2
LOCALBUS POWER RATING: 12VDC AT 150MA
BUSSED FIELD POWER RATING: 24VDC AT 600MA
FIELD CIRCUIT RATING: 240VDC AT 30MA
RACK MOUNTED
I/O Count20 points
Input Type:120V ac
Analog Circuits:4 Inputs, 1 Output
Protocol:DF1
Safety Feature:Master Control Relay
Digital Outputs:8 Contact Outputs
No. of Discrete Inputs:Twelve (12)
Input Voltage Type:120 Volts AC
Voltage Range:79-132 Volts AC
Output Type:Eight (8) Relay
Input Power Rating 35 VDC @ 500m A
AmbientTemperature-40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2 Hz
0.7 g from 13.2 to 150 Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
Relative Humidity 5 to 95% non-condensing
Local Bus Power 12 VDC at 300 mA
Fieldbus Power 9 to 32 VDC at 12 mA/Port
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz;0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing IP 20 Rating
Terminal Block keyPosition D6
Field Power 35 VDC at 1 A
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz;0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing
Terminal Block Key Position Set according to I/O card installed
SERIAL INTERFACE CARD
12 VDC
300 MA
2 PORT
D4 TERMINAL BLOCK KEY POSITION
Simplex SIC (Serial Interface Card),
LocalBus Power Rating 12 VDC 300mA
Ambient Temperature -40 to 70 degrees C
Displacement: 0–500 µm peak-to-peak
Velocity: 0–20 mm/s RMS
Acceleration: 0–50 g peak
Frequency Response: 0.5 Hz to 30 kHz
Sampling Rate: Up to 100 kHz
Operating Temperature: -40°C to +85°C
Vibration Velocity: Typical range 0–20 mm/s RMS
Vibration Acceleration: 0–50 g peak
Frequency Range: 0.5 Hz to 10 kHz
Speed Range: 0–3,000 RPM
Analog Outputs: 4–20 mA
Operating Temperature: -40°C to +85°C
Voltage: 18–30 VDC
Power Consumption: <5 W
Vibration Velocity: Typical range 0–20 mm/s RMS
Vibration Acceleration: 0–50 g peak
Frequency Range: 0.5 Hz to 10 kHz
Speed Range: 0–3,000 RPM
Analog Outputs: 4–20 mA
Operating Temperature: -40°C to +85°C
Voltage: 18–30 VDC
Power Consumption: <5 W
Series:PowerFlex 753
Frames:1..5, 8...10
Enclosure Type:AC and DC Input with Precharge
Frames:2 2...7
Enclosure Type 2:IP20/IP00, NEMA/UL Type Open
Voltage:400 Volts AC/540 Volts DC
Horsepower:300
Filtering:Yes
Default CM Cap Connection:Jumper Installed
PowerFlex 753 AC Drive
with Embedded I/O, Standard Protection
Forced Air, AC Input with DC Terminals
Open Type, 37 Amps, 18.5kW ND
15kW HD, 400 VAC, 3 PH, Frame 3
Filtered, CM jumper installed (preferred)
DB Transistor, Blank (No HIM)
PowerFlex 753 AC Drive
with Embedded I/O, Standard Protection
Forced Air, AC Input with DC Terminals
Open Type, 30 Amps, 15kW ND, 11kW HD
400 VAC, 3 PH, Frame 3, Filtered
CM jumper installed (preferred)
DB Transistor, Blank (No HIM)
Part Number/Catalog No.:20F11NC015JA0NNNNN
Series:PowerFlex 753
Frames:1..5,8...10
Enclosure Type:AC & DC Input w/Precharge
Frames:2 2...7
Enclosure Type 2:IP20/IP00, NEMA/UL Type Open
Voltage:400V AC/540V DC
Filtering:Yes
Default CM Cap Connection:Jumper Installed
