3300 XL 8 mm Probe
M10 x 1 thread,with armor
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector with
connectorprotector standard cable
00 Not required
Typically 50 Ohms
Operating Voltage:≤30 V DC
Proximity Probe End: BNC connector
Bend Radius: ≥10x cable
Operating: -40°C to +85°C
Storage: -50°C to +105°C
Power Supply:24 V DC
Ethernet Port (TCP):- 10/100 Mbps RJ45
Modbus RTU (RS485)
Modbus TCP (TCP/IP) compliance
Isolation:1500 V AC
Operating Temp: -25°C to +70°C
High Voltage Isolation: Up to 2–4 kV
Resistance Range: 10 Ω–1 MΩ
Power Rating: 0.25–2 W
Voltage Rating: 50–500 V DC/AC
Temperature Range: -55°C to +150°C
RoHS: Lead-free manufacturing.
UL 94V-0: Flame-retardant encapsulation
Two-channel SSI interface
Direct interface to most sensors that output SSI
Onboard diagnostics monitor and report errors
Compatible with leading SSI sensors
Onboard fault diagnostics that
constantly monitor system integrity and report errors
Analog Outputs: 4–20 mA
Voltage: 12–24 V DC
Consumption: ≤5 W
Drive Coil Excitation: 10–50 V AC
Standard: -40°C to +70°C (-40°F to +158°F)
Humidity: 0–95% RH (non-condensing)
Analog Inputs: 4–8 channels
Analog Outputs: 4–20 mA or ±10 V DC
Digital I/O: 24 V DC
Form Factor: 6U VME module
Operating Temperature: -20°C to +70°C (-4°F to +158°F)
Humidity: 5–95% RH (non-condensing).
System: Mark VI Turbine Control System
Clock Speed: ≥1 GHz
RAM: 1–2 GB DDR3
Flash Storage: 4–8 GB
Form Factor: 6U VME module
Voltage: 24 V DC (±10%)
Power Consumption: ≤25 W
Analog: 4–20 mA, ±10 V DC
Digital: 24 V DC dry/wet contacts
Frequency: Vibration signals
Form Factor: 6U VME module
Data Acquisition:16-bit ADC resolution
Sampling rates up to 50 kS/s
Backplane: VME P1/J1 connectors for bus communication
Signal termination for 4–20 mA
Current: 4–20 mA
Voltage: 0–10 V DC, ±5 V DC
Temperature: RTD (Pt100/1000)
Cable Length: 10 meters (indicated by "-10" suffix)
Bend Radius: ≥8x cable diameter
Operating Temperature: -40°C to +105°C (-40°F to +221°F)
Number of Channels: 8 or 16
Current: 4–20 mA
Voltage: 0–10 V DC, ±10 V DC
Channel-to-channel: ≥250 V AC
Field-to-system: 1500 V AC
Supply Voltage: 24 V DC (±10%)
Power Consumption: ≤5 W
ABB infi-90 Termination Loop Cable
Gauge: 18–24 AWG
Voltage Rating: ≤60 V DC
Operating Temperature: -20°C to +70°C (-4°F to +158°F)
Humidity: 5–95% RH (non-condensing)
Voltage: 24 V DC (±10%)
Power Consumption: ≤10 W (typical)
Isolation: 1500 V AC
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -50°C to +85°C (-58°F to +185°F)
Humidity: 5–95% RH (non-condensing)
Space requirements:4 TE, 3 HE (= 4 HP, 3U)
current: max. 10 mA (WD1in + WD2in)
Number of outputs:18
power requirements:100 mA
current: + 5V_load of all (18) IO boards
+ WD_load of all (18) IO boards
voltage drop:0.2V < V < 0.8V
C-plug
removable data storage medium
For simple device replacement in case offault,
for recording configuration or engineering and application data
can be usedin the following
SIMATIC NET products with C-plug
slot: SCALANCE XC-200,
XP200, XM-400, XR-500,
M-800, W-700, SC-600 and S615
MICROMASTER 440 without filter
380-480 V 3 AC +10/-10% 47-63 Hz
constant torque 0.37 kW overload 150% 60 s
200% 3 s square-law torque 0.37 kW
protection IP20 ambient
temperature -10+50 °C without AOP/BOP
Voltage Feedback: 0–500 V DC
Current Feedback: 0–10 A DC
Accuracy: ±0.25% of full scale
Frequency Response: Up to 100 Hz
Signal-to-System Isolation: 1500 V AC
Common-Mode Rejection: >60 dB at 50/60 Hz
Analog Output: 4–20 mA or 0–10 V DC
3300 XL 11 mm Probe
M14 x 1.5 thread,without armor
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
00 Not required
3300XL 8MM
4 Meter Armored Cable
Insulation Rating: ≥250 V AC
Bend Radius: ≥100 mm
PVC: -40°C to +105°C (-40°F to +221°F)
PUR: -40°C to +90°C (-40°F to +194°F)
Fast Scan (Priority I/O Module Scan)
Electronic short circuit protection
Safe-state (FAILOPT) behaviors configurable
on aper channel basis for Digital / Analog Output
HART 7 support (analog IO)
Extended Temperature Range -40 to +70°Cmodule ambient
Primary/Secondary Inputs: Dual 24 V DC (±20% range)
Voltage: 24 V DC (regulated, ±1%)
Per Module: 5 A continuous (10 A peak)
Redundant Capacity: 15 A total
Efficiency: ≥85% (typical load)
Ripple/Noise: <100 mV peak-to-peak
Occupies one slot in the I/O chassis
Two isolated RS-422 serial
ports for remote multiplexed I/O
Analog Input: 4–20 mA, 0–10 V DC, RTD (Pt100)
Analog Output: 4–20 mA, 0–10 V DC
Channels: 16–32 multiplexed channels
Scan Rate: <10 ms per channel
Analog: 16-bit ADC/DAC
Channel-to-channel: 250 V AC
Input Voltage: 24 V DC ±10%
Sixteen input points
Hot-replaceable
Complete, automatic testing of all input circuits
Automatic line monitoring detects
open and short field wiringfaults
2500 volt minimum electrical
isolation between field and logiccircuits
1751SLBA
SYNCHLINK BASE BLOCK
CONVERTS SYNCHLINK TO ELECTRICAL SIGNALS
TO INTERFACE UP TO 4 FIBER 4-PORT SPLITTER BLOCKS
1.2 AMP
600 MA
24 VDC
OPEN STYLE
MOUNTABLE
1444RELX0004RB
EXPANSION RELAY MODULE
4 SINGLE POLE DOUBLE THROW RELAYS
CONNECT UP TO THREE TO
ONE 1444-DYN04-01RA
DYNAMIC MEASUREMENTMODULE.
REQUIRES 1444-TB-B BASE
AND 1444-REL-RPC- CONNECTOR SET
Current consumption:1110 mA 5 V DC
Module format:Double
Operating altitude:0...6561.68 ft (0...2000 m)
Protective treatment:TC
Analogue I/O processor:80 I/O
Discrete I/O processor:1024 I/O
Concept:Transparent Ready
Software Designation:PL7 Junior/Pro
Display Size:10.4 in
Manufacturer:Rockwell Automation
Product Family:PanelView Plus Operator Terminals
Operator Input:Touch
Resolution:640 x 480
Toiuchscreen:1 million presses
Input Voltage range:18-32VDC
Communication:Ethernet and RS-232
Input Power:18 to 32 VDC
Memory:64 MB
Relay:SPDT, rated 5 A @ 250 V AC
Solid-State Relay (SSR) Driver:12 V DC, 30 mA
Analog Output:0–10 V DC or 4–20 mA
Accuracy: ±0.2% of full scale
Display Type: Backlit LED or LCD
Voltage: 100–240 V AC
Power Consumption: ≤ 5 W
Input Voltage: 24 V DC
Range: 18–32 V DC
Power Consumption: Typically ≤ 10 W
Isolation Voltage: 1500 V AC
Serial Ports: RS-232/RS-485 (configurable).
Ethernet: 10/100 Mbps RJ45 (TCP/IP)
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Storage Temperature: -50°C to +85°C (-58°F to +185°F)
Software designation:PL7 Junior/Pro
Number of racks:6 4/6/8 slots;8 12 slots
Discrete I/O processor:1024 I/O
Number of application specific channel:32
Current consumption：1360 mA at 5 V DC
Module format：Double
Operating altitude：0...2000 m
Input Voltage: 24 V DC
Input Range: 10–30 V DC
Number of Input Points: 32 points
Input Current: 3–5 mA per point
Isolation: 1500 V AC
Backplane Power: 5 V DC
Field Power: External 24 V DC supply for I/O
Input Delay: ≤ 1 ms
Extensive internal diagnostics for data integrity
NO Open wire detection
Optional redundancy
On board excitation power
Supplies Non-incendive field power
Direct / Reverse Input Indication
Galvanic isolation
Internal or external field power selection
SIMATIC S7-1500
Analog input module AI 8xU/I HS
16 bit resolution,
Accuracy 0.3% 8 channels in groups of 8
Common mode voltage 10 V
Diagnostics; Hardware interrupts 8 channels in 0.0625 ms Oversampling;
Delivery including infeed element
ZIEHL-ABEGG FB063-6EQ.4I.V4L
230V 2.3A 0.47KW Cooling Fan
ZIEHL-ABEGG substitute
without enclosure and grille
AC/DC:AC
Size :630 mm x 630 mm x mm
Current:2.3A
Power:0.47KW
Voltage:230V
Linear Measurement Range:2 mm (80 mils)
Initial Air Gap:0.5 mm (20 mils)
Incremental Scale Factor (ISF):
ISO: 8 V/mm (203.2 mV/mil) ± 5%
temperature range 0 to 45°C(+32 to +113°F)
Deviation from best fit straight line(DSL)
± 0.025 mm (± 1 mil)
temperature range 0 to 45°C(+32 to +113°F)
Linear Measurement Range:2 mm (80 mils)
Initial Air Gap:0.5 mm (20 mils)
Incremental Scale Factor (ISF):
ISO: 8 V/mm (203.2 mV/mil) ± 5%
temperature range 0 to 45°C(+32 to +113°F)
Deviation from best fit straight line(DSL)
± 0.025 mm (± 1 mil)
temperature range 0 to 45°C(+32 to +113°F)
Function:4 AI: U, I
Number of Analog Configurable I/Os:0
Analog Inputs:4
Input Signal:U, I
Resolution:Analog Input 12 bit
Connection Type:Pluggable
Degree of Protection:Housing IP20
Ambient Air Temperature:
Operation 0 ... +60 °C
Storage -40 ... +70 °C
Output Channels:32
Load Voltage:30 VDC Maximum
Load Current :0.1 A per channel
Galvanic Isolation :1000 VAC RMS for System3
Off-State Voltage:24 V
Off-State Leak Current:100 µA (max)
Turn-On/Turn-Off Time:10 ms (max)
Product Type:Gas & Liquid Flow Computer
Slot(s):1
Rack Type:Local or Remote
Data Transfer Type:Ladder Logic
RAM:128 MB min
Hard Drive Space:100 MB min
Pentium PC:100 mHz or faster
Backplane Current Load:800 mA @ 5V DC
Power Supply:40 Watts
Nominal Rated Voltage:120/240 VAC or 125 VDC
Input Voltage Range:18 to 30 VDC
Input Power:60 Watts maximum at full load
Outputs:3
Ripple:150 mV
Output Current:5.1 VDC
Noise:150 mV
Isolation None
Number of Daisy-Chained PSD140:Up to 4
Terminal Current:6 Amps
Memory Main:256 MB with ECC
Static RAM:2 MB with ECC, backed up by battery
1 GB on-boad flash memory
2 Ethernet ports : RJ45 modular jacks
SB bus (duplex)
Supply voltage:5 V DC ±5 %
Current consumption:Max.1200 mA
3300 XL 8 mm Probe
M10 x 1 thread,with armor
15 1.5 meter (4.9 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
00 Not required
Application:Rx7i PLC System
Random Access Memory (RAM):64 MB
Operating Voltage:+5, +15, -12 Volt DC
Flash Memory:64 MB
Current Rating:3.4 Amps
Discrete I/O memory:32 K
Microprocessor:600 MHz Pentium M
Analog I/O memory:32 Kwords
CPU Memory:64 Megabytes
Compatible Memory storage:SRAM, Flash
User Memory:64 Megabytes
Processor speed:600 MHz
Max Program Block:512 Program Blocks
Series:PACSystem RX7i
Description:Power supply module
Part Number:IC698PSA100
Voltage:120/240 Volts AC, 125 Volts DC
Product Description:Power Supply module
Mounting:Leftmost slot
Input Voltage Range:85 to 264 VAC; 100-150VDC
Power Rating:125 Watts
Output Voltage:5/12, -12 Volts DC
AC Input Frequency:47-63 Hz
Power Factor:0.99 min
3-Phase
With or Without Radio Interference Suppression
Varied Supply Voltages
SEW Eurodrive MOVIDRIVE MCH4xA Series
Compact Drive Inverters offer varied supply supplies
with a 3-Phase connection type
Part Number:2711P-RDB7C
Description:Display Module
Resolution:640 x 480
Display colors:18-bit color graphics
Luminance:300 cd/m2 (Nits)(3)
Input interface:Touch / Keypad
Anti-Glare overlay:not included
Touch Input:8-wire analog resistive
Resolution:640 x 480
Display colors:18-bit color graphics
Luminance:300 cd/m2 (Nits)(3)
Anti-Glare overlay:not included
Touch Input:8-wire analog resistive
Touch interface lifespan:1 Million actuations
Actuation force:10-110 g
Part Number/Catalog No.2711P-RDT7C
Series:PanelView Plus
Input:Touch
Display:7-inch Color
