field supply 85 A field current
Digital I/O: Enable (24VDC)
Input Supply: 3AC 400V (±15%)
Internal Logic Power: 24V DC (±10%)
Analog Input (Setpoint): ±10V / 4–20mA
Output Voltage Range: Up to 375 V DC
Regulation Accuracy: ±1% of setpoint
CONTROL BOARD
ELECTRONIC C98043-A1600-L1
Main Processor: Digital Signal Processor
Flash Memory: 4–8 MB
Digital Inputs/Outputs: 16–24V DC I/O ports
Analog Inputs: ±10V or 4–20mA
Voltage Input: Typically 24V DC (±15%)
Supply Voltage:24 V DC (±10%)
Grid Input:380 V AC – 575 V AC, 50/60 Hz
Pulse Frequency:50–60 Hz
Fired Thyristors:current/torque control
Operating Temperature:0°C to +55°C
afety First: Discharge DC link capacitors
SIMOVERT MASTERDRIVES
Snubber Function :up to 1.5–2.5kV
Relay Contacts:Rated for ≥ 850A
Voltage Rating:480V AC , 50/60 Hz
Current Handling:Supporting up to 1200A systems
Control Voltage: +24 V DC (±10%)
Current Consumption: ≤1.5 A
Temperature: 0–55°C ambient
Storage Humidity: ≤93% non-condensing.
Digital I/O Sourcing:10–24 V inputs, ±24 V outputs
Voltage: 24 V DC (±10%)
Analog Reference Signals: ±10 V or 4–20 mA
Output Voltage: Adjustable 0–400 V DC
Output Current:10–20 A continuous
Temperature Range: -10°C to +55°C
Humidity: ≤95% non-condensing
SINAMICS DCM DC converter
for 4-quadrant drives Circuit (B6) A (B6) C
Input: 400V 3AC, 13A
controllable: Field rectifier D420/15
MREQ-GEG6V62
Output: 420 V DC, 15 A
Input Voltage Range:380–480 V AC
Output Voltage (DC):50–250 V DC
Continuous Excitation Current: 10–20 A DC
Analog Input: Accepts ±10 V or 4–20 mA
Internal Logic Supply: Isolated 24 V DC
Temperature: 0°C to +60°C operation (-25°C storage)
Humidity: ≤96% non-condensing
Control Circuit: +24 V DC ±15%
Sensor Integration: 0–10 V/4–20 mA
Standard: 0°C to +55°C
Isolation Voltage: ≥ 2.3 kV
Condensation Avoidance: Operates at ≤95% humidity
6RY18030-DA02
Power Interface Board
Input Voltage:+24 V DC
Optional Input Ranges: 10~30 V DC
Continuous (Logic/Control): 1–3 A
Rush (Reley Outputs): 5–10 A
Operating Temperature: 0°C to +55°C
Allocation board
C98043-A7126-L1
Control Circuit: 24 V DC ±10%
Communication: +15 V DC/-15 V DC
Screw-terminals for ≤1.5–2.5 mm² wires
Temperature: 0°C to +55°C (derating at >+40°C).
Humidity: ≤90% non-condensing
3300 NSv · 25" Length
Power Supply:-18 to -24 V DC
Output Signal: -2 to -18 V DC
Sensitivity: 200 mV/mil (7.87 V/mm)
Measurement Range: 0–80 mils (0–2.0 mm)
Frequency Response: 0 to 10 kHz
Probe: -30°C to +150°C (-22°F to +302°F)
Cable: Up to +125°C (°C short-term)
power interface
C98043-A7003-L1 incl
painted terminals
Power Side:240-690 V AC
Control Voltage: 24 V DC
Terminal Current Rating: 5–20 A
Thermal Compliance:500–600 W
Excitation board
power unit 15 A 4Q
C98043-A7111-L1
Continuous Output Current: 15 A
Output: 160–400 V DC
Input: Logic supply 24 V DC ±10%
Isolation: ≥2500 V AC
Temperature: 0–55°C (non-condensing)
Relative Humidity: ≤95%
AC: 120–480 V AC
DC Voltage Input: 24 V DC ±15%
Relay Outputs:10 A @ 250 V AC
Current Handling: Up to 100 A
Isolation Voltage: Up to 2.5 kV
Secondary Voltage: 12 V/24 V DC
POWER INTERFACE BOARD
RELAY OUTPUTS
WITH ON-BOARD TRANSFORMERS
Signal Interface:24 V DC
Number of Relays:8 to 16 channels
AC Load: 240 V AC @ 8–10 A
DC Load: 24–48 V DC @ 5-8 A
PC BOARD
BACK PANEL
REAR
6RY1703-0GA01
Contact Rating: 5‒10 A @ 24–230 V AC/DC
Isolation Class:24 V AC/DC isolation
Control Side: 24 V DC
Power Circuit: Up to 690 V AC three-phase
POWER INTERFACE BOARD
RELAY OUTPUTS
WITH ON-BOARD TRANSFORMERS
Contact Configuration:Typically SPDT or DPDT relays
Maximum Switching Voltage:250 V AC/DC
Current Rating:5–15 A per relay
Purpose:24 V AC/DC to lower voltage
Control Input(s): 24 V DC
PC BOARD ASSEMBLY
FIELD POWER SUPPLY PC BOARD
Nominal Input: 110-240 V AC
Frequency: 47-63 Hz
Voltage Output: Likely 24 V DC
Operating Temperature: Range of 0°C to +60°C
Humidity Tolerance: ≤95%, non-condensing
SCALANCE SC646-2C
Industrial Security Appliance
For protection of devices and networks
manufacturing and the process industry
for protection of the industrial communication with
firewall and VPN
address conversion (NAT/NAPT)
Connection to SINEMA RC
4x ports electrical 10/100/1000 Mbit/s RJ45 and
2x combo port electrical or optical
10/100/1000 Mbit/s RJ45
100 Mbit/s SFP or 1000 Mbit/s SFP
Inverter snubber Module SML4
Rated Voltage: 510 V to 930 V
Peak Current Handling: 10–20 A
Operating Temperature: -10°C to +50°C
Storage Temperature: -40°C to +85°C
Humidity: Up to 95% non-condensing
Smart Line Module :6TG38-8AA0
Rated power of the SmartLine Module:710
Power loss 50/60 Hz
Rated voltage:
3-ph. 500 V AC -10 % (-15 % < 1 min)
3-ph. 690 V AC +10 %
SIMOVERT SBP Pulse
Encoder Feedback Optional Board
Signal Resolution Support:1024–5000 pulses per revolution
Maximum Input Frequency:≤ 300 kHz
Encoder Supply Voltage:5 V DC or 15–30 V DC
Input Voltage: 24 V DC
PROFIBUS DP: Up to 12 Mbps
Modbus RTU: Typically 9600 bps – 115.2 kbps
Operating Temperature:-25°C to +70°C (-13°F to +158°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)
Humidity:5% – 95% (non-condensing)
Typical current consumption: < 200 mA
11:1.0 meter (3.3 feet) system length, DINmount
51:5.0 meters (16.4 feet) system length,DIN mount
91:9.0 meters (29.5 feet) system length,DIN mount
00 Not required
Gap Voltage: Standard range -2 V DC to -18 V DC
ADAPTER MODULE
SIMOVERT MASTER DRIVES
MOTION CONTROL
FOR COMPACT AND INSTALLATION DEVICES ADB
Voltage Supply: +24 V DC
Operating temperature: 0°C to +55°C
SINAMICS DCM
DC speed regulation excitation board
Output Voltage Range: 0–250 V DC
Field Current Rating: Typically ≤20 A
Enable/Disable Signals: 24 V DC
Temperature Range: 0°C to +55°C (60°C with derating)
Humidity: 5–95% non-condensing
Family:HMI
Series:GP4000 Series
Display type:TFT Color LCD
Display size:7.5"
Resolution:640 x 480 pixels (VGA)
Backlight service life:50,000 hrs. or more
