















Genius Network Interface Unit
INTERFACE MODULE
REMOTE I/O
GENIUS NETWORK
153.6 KBAUD EXTENDED
38.4/76.8/153.6 KBAUD STANDARD
469P5HIA20EH
DISCONTINUED BY MANUFACTURER
MOTOR MANAGEMENT RELAY
BASE UNIT 469
CURRENT TRANSFORMER INPUTS - 5 AMP
90-300 V DC
70-265 V AC
48/62 HZ
4-20 MA ANALOG OUTPUTS
ENHANCED FRONT PANEL
HARSH CONFORMAL COATING
CP 343-1 Ethernet Module
Communications processor CP 343-1
for connection of SIMATIC S7-300
toIndustrial Ethernet via ISO and TCP/IP
PROFINET IO controller or PROFINET IOdevice
integrated 2-port switch ERTEC 200
S7 communication, fetch/write
SEND/RECEIVE RFC1006, multicast, DHCP
NTC- CPU sync, with and withoutdiagnostics
initialization via LAN,
2x RJ45 connection for LAN with 10/100 Mbit/s
CPU 313C-2 DP Compact CPU with MPI
SIMATIC S7-300
CPU 313C-2DP COMPACT CPU WITH MPI
16 DI/16 DO, 3 FAST COUNTERS (30 KHZ)
INTEGRATED DP INTERFACE
INTEGRATED 24V DC POWER SUPPLY
64 KBYTE WORKING MEMORY
FRONT CONNECTOR (1 X 40PIN)
AND MICRO MEMORYCARD REQUIRED
PANELVIEW 800 7-INCH HMI TERMINAL
Operator Input:Touch
Backlight:40,000 hours
Display Area:153.6 x 86.6 mm (6.05 x 3.41 in.)
Resolution:800 x 480
Input Voltage range:18-32VDC
Part Number/Catalog No.2711R-T7T
Product Line:Panelview 800
Product Type:Human-Module Interface
Display Color:Color TFT
1336SEN5
DISCONTINUED BY MANUFACTURER 2015-01-05
LANGUAGE MODULE
ENGLISH
FOR 1336 PLUS DRIVE
BACKPLANE COMMUNICATION MODULE
SSTPFBSLC
BACKPLANE COMMUNICATION MODULE
SLC 500
PROFIBUS ADAPTER MODULE
1 PROFIBUS
5 VDC BACKPLANE
750 MA
Servo Controller
6SC61100GA01
DISCONTINUED BY MANUFACTURER
DRIVE MODULE
600VAC
MICRO SIM
Tariff Code: 8504409570
Country of Origin: Germany
Digital Output Relay Module - N.O.
8 channels for 230 V a.c./d.c.
relay Normal Open (NO) outputs
8 isolated channels
Output status indicators
OSP sets outputs to predetermined
state upon error detection
Flex Remote I/O Adaptor
1794ASB
DISCONTINUED BY MANUFACTURER 2015-03-30
REMOTE I/O ADAPTER
24 VDC
FLEX
8 POINT
NETWORK: UNIVERSAL REMOTE I/O
I/O MODULE
Tariff Code: 8517620050
Country of Origin: United States
Analog Input Module
1771IFE
DISCONTINUED BY MANUFACTURER 05/31/2017
INPUT MODULE
16 POINT
ANALOG
12 BIT
0.75 AMP
5 VDC
Tariff Code: 8538909100
Country of Origin: United States
Flex 16 Point Digital Input Module
Number of inputs:16, nonisolated
On-state voltage, min:159V AC
On-state voltage, nom:240V AC
On-state voltage, max:264V AC
On-state current, min:5.30 mA
On-state current, max:13.29 mA
Nominal input impedance:22.2 kΩ
Nominal input current:11 mA @ 240V AC
Flexbus current:32 mA @ 5V DC
Power dissipation, max:6 W @ 264V AC
Flex 16 Point Digital Output Module
Number of I/O channels:16, nonisolated
On-state current:50 mA min per output
Surge current:7 A for 40 ms each
Off-state leakage, max:2.5 mA
Field Bus current:116 mA
Power dissipation, max:6 W @ 264V AC
Thermal dissipation, max:20.47 BTU/hr @ 264V AC
POINT I/O 2 Point Thermocouple Input
1734IT2I
I/O MODULE
TEMPERATURE
2 DIFFERENTIAL THERMOCOUPLES INPUTS
175 MA POINT BUS CURRENT
24 VDC
Tariff Code: 8538907080
Country of Origin: Singapore
Digital Output Module
Discrete output module
Modicon Premium
32 outputs
1.6W
overvoltage protection
by transil diode
AC SERVO DRIVE
AC SERVO DRIVE
VARIABLE FREQUENCY
3 PHASE
380/480 VAC
50/60 HZ
20 HP
29 AMP
NORMAL DUTY
OPEN LOOP VECTOR CTRL
CLOSED LOOP IND MOTOR CTRL
REGENERATIVE CONTROL
Discrete Module
Discrete output number16
Discrete output typeSolid state protected
Discrete output voltage:24 V DC positive conforming to EN/IEC 61131-2 19...30 V
Discrete output current:0.5 A
Current per channel:0.625 A
Minimum load impedance:48 W
isalotion resistance:> 10 MOhm 500 V
Current consumption:80 mA at 5 V DC

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.