ALL MANUFACTURERS

SLC01 Single Loop Controller

Smart Interface Unit

Esacontrol Board

Esacontrol Board

Alarm/Control Panel

Power Supply

POWER RELAY

ODC24A
POWER RELAY
SOLID STATE
SPST-NO / 1 FORM A
18-32 VDC INPUT
60 VDC OUTPUT
3 AMP

POWER RELAY

ODC24
POWER RELAY
SOLID STATE
SPST-NO / 1 FORM A
18-32 VDC INPUT
60 VDC OUTPUT
3 AMP

AC Output Module

OAC-24A
AC Output ModuleINFI 90
24 VDC
850 MA

AC Output Module

OAC-24
AC Output ModuleINFI 90
24 VDC
850 MA

Bailey Slave Cardfile

9' Termination loop Cable

TPL to LIM Communication Cable

Digital Control Stability Cable

Analog Slave Termination Unit Cable-18ft

Boot-Terminator / Diagnostic ROM Module

Typically 24 VDC
Low power requirement for efficient operation.
-20°C to +60°C (-4°F to +140°F).
-40°C to +70°C (-40°F to +158°F).
5% to 95% non-condensing.
Typically IP20 for internal cabinet installation

MC-1 Card

Bailey Infi 90
DCS systems
Typically 24 VDC
Bailey DCS systems
Operating Temperature Range: -20°C to +60°C 
Storage Temperature Range: -40°C to +85°C

SSI Card PCB Circuit Board

INPUT CARD 
SSI 24VDC
100 kHz to 1 MHz
24V DC (Nominal)
< 200 mA

Current Buffer

4-20 mA 
±0.1% of full-scale value
Up to 600 Ω
<10 ms
Signal isolation
amplification
and distribution in current loop systems

Pulser

Pulser Unit
Square wave signal
5V to 24V DC
Up to 10 kHz
TTL or RS-422 compatible output
High-precision pulse generation 
with ±0.1% tolerance

E/I Converter

Input Signal:1-5 V DC 
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for current loop compatibility
Response Time: <10 ms

E/I Converter

Input Signal: 0-10 V DC 
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for 
current loop compatibility
Response Time: <10 ms

Transfer Relay Delay

Contact Configuration:
1 NO (Normally Open)
1 NC (Normally Closed)
Contact Rating:
AC: 250V AC, 10A (resistive)
DC: 24V DC, 10A (resistive)
Coil Voltage: 24V DC (Nominal)
Contact Material: Silver alloy for enhanced durability and low contact resistance
Time Delay Range: 0.1 to 10 seconds (adjustable)
Switching Time (Normal Mode): <10 ms (without delay)

Transfer Relay

AC: 250V AC, 10A 
DC: 24V DC, 10A 
Coil Voltage: 24V DC (Nominal)
Contact Material: Silver alloy for 
low contact resistance and enhanced durability
Switching Time: <10 ms 
Life Expectancy:
Mechanical Life: 10 million operations
Electrical Life: 100,000 operations at rated load

Signal Monitor

Response Time 
Typically ≤ 1 ms for fast signal monitoring
Display
LED or LCD display (if applicable) 
for real-time monitoring feedback
Mounting DIN rail or panel mount
Operating Temperature -20°C to +60°C
Storage Temperature -40°C to +85°C
Humidity 5% to 95% non-condensing