ALL MANUFACTURERS

PCB BOARD

Operating Voltage:24V DC ±10%
Power Consumption:8W max
Digital Inputs:6x (24V DC, opto-isolated)
Analog Inputs:2x (0-10V/4-20mA)
Relay Outputs:2x (5A @ 250V AC)
Isolation Voltage:1500V AC
Processor: ARM Cortex-M4 168MHz
Memory: 256KB Flash

Interface Card

Supply Voltage:24V DC (±10%)
Power Consumption:≤5W
Digital Inputs:8x (24V DC, opto-isolated)
Analog Inputs:4x (0-10V / 4-20mA, 12-bit resolution)
Relay Outputs:2x (5A @ 250V AC, Form C)
Isolation Voltage:2500V AC
Processor: 32-bit ARM Cortex-M4 

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length:2.0 in
Minimum case length: 3.9 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 4.6 in
Minimum case length: 6.5 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 0.3 in
50 5.0 meters (16.4 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx  Approvals

Proximitor Sensor Sensor

9 0 9.0 metres (29.5 feet）
0 5 Multiple Approvals
24VDC Power Supply

DC Motor Controller

Input Voltage:3-phase 380-500V AC ±10%
Output Voltage:0-400V DC (armature)
Current Rating:2000A continuous
Field Supply:0-300V DC, 20A
Control Voltage:24V DC ±10%
Speed Regulation: ±0.1% of base speed
Torque Control: ±1% of rated torque
Response Time: <20ms for 90% speed change
Resolution: 16-bit 
Standard: PROFIBUS DP-V1 (12Mbps)
Optional: DeviceNet, Modbus RTU

Field Exciter Board

Field Voltage Output:50-300V DC 
Field Current Rating:Up to 20A 
Control Voltage:24V DC (±10%)
Isolation Voltage:2500V AC
Response Time:<10ms
Analog Inputs: 2x (0-10V/4-20mA) for field ref
Digital Inputs: 3x (24V DC) for enable/disable
Relay Outputs: 2x (5A @ 250V AC) 

MOBILE PANEL 277 10"

SINAMICS PWB AC FSG 480V 380A

Communications Coprocessor Module

CSM 1277 Compact Switch Module

MM4 Mailbox Module

MEMORY MODULE
SIMADYN D MM4
32 BIT
L- AND C-BUS
2 MB RAM SYSTEM
ERROR SIGNAL OUTPUT

Power supply unit

Analog Signal: 0-10V 
Dual Output Voltage – +24V DC
Remote On/Off – 24V DC control input
Input Voltage:3-phase 380-500V AC (45-65Hz)
Output 1 (+24V DC):10A (240W)
Output 2 (+15V DC):5A (75W)
Efficiency:≥92% (at full load)
Ripple Noise:<1% of rated output

990 Vibration Transmitter

990 Vibration Transmitter 
04 0-4 mils pp (0-100 μm pp)
50 5.0 meters (16.4 feet)
70 7.0 meters (23.0 feet)
01 35 mm DIN rail clips
00 Not required
147202-01 (RMOD4140 3300XL 8MM 5M)

990 Vibration Transmitter

990 Vibration Transmitter 
08 0-8 mils pp (0-200 μm pp)
50 5.0 meters (16.4 feet)
70 7.0 meters (23.0 feet)
01 35 mm DIN rail clips
00 Not required
 165335-01(MOD 4140 3300 XL 8MM 9M)