
DM370 Dummy Module
SIMATIC S7-300
dummy module DM 370
Dummy module Use
for modulereplacement
IM360 Interface Module
SIMATIC S7-300
Connection IM 360 in
central rack for connection of max
3expansion racks, with C-bus
Terminal Modules - 5 Pack
SIMATIC DP
5 TERMINAL MODULES
TM-E15S24-01 FOR ET200S FOR
ELECTRONIC MODULES 15MM WIDE
SCREW-TYPETERMINALS 2X4 TERMINAL
CONNECTIONS W/O TERMINALLEAD TO AUX1
AUX1 IN LINE, 5 PIECES PER PACKAGING UNIT
3300 XL Standard Extension Cable
A: Cable Length Option
080: 8.0 meters (26.2 feet)
B: Connector Protector and Cable Option
00: Standard cable
CN: Country Specific Approvals
CN: This indicates that the product meets
specific regulatory and compliance requirements for China
CABLE EXTENSION
3301300450005
CABLE EXTENSION
MODEL 3300 XL
4.5 METER (14.8 FOOT) CABLE LENGTH
STANDARD CABLE
MULTIPLE APPROVALS
Velomitor Piezo-velocity Sensors
02 M8 x 1
00 Not required
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%.
Velocity Range 1270 mm/s (50 in/s) peak.
TransverseSensitivityLess than 5% of sensitivity.
MountedResonantFrequencyGreater than 12 kHz
DynamicOutputImpedanceLess than 2400 Ω
Analog Output Module
Output Type: 4-20mA (current loop)
Channels: 8 isolated outputs
Resolution: 16-bit
Voltage: 24V DC ±10%
Current Consumption: 120mA max
4-20mA: Load resistance ≤750Ω
Accuracy: ±0.1% of full scale
Counter Module
SIMATIC DP
Electronics module for ET 200S
1 count 24 V/100 kHz 15 mminstallation width
operating modes: Count, Measure
(cycle duration measurement,high-resolution)
with clock synchronization
Safe loop-monitored digital output module
Safe loop-monitored digital output module
24 Vdc, 1 A, 4 channels
Ability to de-energize
Ability to de-energize via secondary means
Cross talk between outputs
Function of the suppression diodes
Lead breakage in the (external) output wiring
Short circuit of the outputs
Network Interface
IC695NIU001-ACAD
Module Type:Network Interface
Number of Slots:1 (single slot)
Backplane Support:Dual: RX3i PCI and 90-30 Serial
Communication Ports:(2) RS-232 and RS-485
Base Unit
PM802F
BASE UNIT
4MB
BATTERY-BUFFERED RAM
CENTRAL UNIT
115/230 VAC
50/60HZ
24 VDC
FIELDCONTROLLER 800
PRODUCT ID: 3BDH000002R1
Country of Origin: Germany
PM 803F Base Unit
3BDH000530R1
DISCONTINUED BY MANUFACTURER
BASE UNIT
PM 803F
STEP 2
16 MB
10 X 7 X 8 INCH
Tariff Code: 8537109060
Country of Origin: Germany
Processor Module
Input Voltage: 24 V DC
Power Consumption: 15–30 W
Likely Dual- or Quad-Core CPU
Clock Speed: ≥ 1 GHz
RAM: 2–4 GB DDR3/DDR4
Flash Storage: 8–32 GB
2–4× Gigabit Ethernet (RJ45)
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.