ALL MANUFACTURERS

Interconnect Cable

Product Type : Interconnect Cable
Model : 16710 - TEIP11-PS I/P Converter, 
signal converter for standard signals, 
with power stage
Cable Length Option : 20 - 20 ft

Interconnect Cable

Length:9 feet (2.74 meters)
Conductors:4 conductors (2 twisted pairs)
Wire Gauge:22 AWG stranded copper
Insulation:Fluorinated Ethylene Propylene (FEP)
Voltage Rating:300V AC/DC

Dual-Channel Proccess Variable Monitor

Supply Voltage:90-264VAC, 47-63Hz or 18-36VDC
Power Consumption:15W typical
Isolation:1500VAC input-to-output
Input Types:4-20mA
Accuracy:±0.1% of full scale
Resolution:16-bit (0.0015% of span)
Sampling Rate:10 samples/second per channel
Analog Inputs:2 isolated channels, 24-bit ADC

3300 XL 8 mm Proximity Transducer

330102-00-50-10-01-05
DISCONTINUED BY MANUFACTURER
PROXIMITY PROBE
3300 XL 8 MM
5.0 INCH OVERALL CASE LENGTH
1.0 M (3.3 FT) TOTAL LENGTH
3/8-24 UNF THREAD
WITH ARMOR

3300 XL 8 mm Probe

3300 XL 8 mm Probe
3/8-24 UNFthread
with armor
Order in increments of 0.1 in.
Standard thread configurations:
Maximum case length: 9.6 in.
Minimum case length: 0.8 in.
Example: 2 4 = 2.4 in.
20 2.0 meters (6.6 feet)
01Miniature coaxial ClickLocconnector 
with connectorprotector, standard cable
05 CSA, ATEX, IECEx  Approvals

Interconnect Cable

Voltage Rating: ≤300 VAC/DC
Capacitance: ≤100 pF/m
Temperature Range: -40°C to +85°C (-40°F to +185°F)
end Radius: ≥10x cable

Aero GT Vibration I/O Module

Supply Voltage: 24V DC (±10%)
Power Consumption: <15W (typical)
Input Channels:2 independent channels
Signal Range:±10V (IEPE), 4–20mA (Velocity)
Sampling Rate:Up to 100 kHz per channel
Frequency Response:0.5 Hz – 20 kHz (±3dB)
Dynamic Range:100 dB (typical)
ADC Resolution:24-bit
Analog Output:4–20mA

3500 SYSTEM CHASSIS RACK

02 12-inch Mini-Rack (7 module slots)
04 Panel Mount Option, Mini-Rack
00 None
00 None
01 CE
Mini-rack. 12-inch rack 
with seven available module slots

Power Supply Module

0 2 190-250 Vac 50/60 Hz 
2 2 Internal Safety Barrier
0 0 Not Required 

Low Voltage DC PIM

114M5335-01 Low Voltage DC PIM
Input Voltage:10-30V DC
Input Signal:LVDT/RVDT (1-5V RMS, 2.5-10kHz)
Output Signal:4-20mA (fault = 3.8mA or 21mA)
Accuracy:±0.25% FS

Wind Turbine Monitor

Input Power:24V DC (±10%) or 100–240V AC
Power Consumption:<20W (typical)
Analog Inputs:4–20mA, ±10V, IEPE (2-wire)
Relay Outputs:4x SPDT (5A @ 250V AC)
Communication:Ethernet, Modbus TCP/RTU

3300 XL 8 mm Probe

3300 XL 8 mm Probe
M10 x 1 thread, witharmor
5 0 5.0 metres (16.4 feet)
0 2 Miniature coaxial ClickLocTMconnector
standard cable
0 0 Not required 

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 1.5 in
Minimum case length: 4.0in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 5.5 in
Minimum case length: 7.5 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 8 mm Proximity Probes

330101  3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.5 in
Minimum case length: 3.0 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 50 mm Proximity Probe

0 2 M14x1.5 Thread
1 0 1.0 meter (3.3 feet)
0 1High Temperature FluidLocCable with Armor
0 0 No Approvals
Proximitor Sensor Material:A380 aluminum

3300 5mm Proximity Probes

330171 3300 5mm Probe
1/4-28 UNFthread, without armor 32 = 3.2 in
0 5 0.5 meter (1.6 feet)
0 1 Miniature coaxial ClickLocconnector 
with connectorprotector, standard cable
0 5 Multiple Approvals

3300 XL Standard Extension Cable

085 8.5 meters (27.9 feet)
02 Standard cable 
with connectorprotector
00 Not required

Velomitor CT Transducer

1 2 Plate Stud 3/8-in 24 to M8x1
0 0 MIL-C-5015 connection interface
0 4CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)