ALL MANUFACTURERS

Chassis for non-redundant I/O modules (conformal coated)

Safe digital output module (24 Vdc, 0.55 A, 8 channels) (conformal coated)

Safe high-density analog input module (24 Vdc, 16 channels) (conformal coated)

Power supply

Series: CP-C
Model: 24/20.0
Type: Industrial switching power supply
Power Rating: 480W
Output Voltage: 24V DC ±1%
Input Voltage Range:100-240V AC (47-63Hz)
Inrush Current: <20A 
Power Factor: >0.95 at full load
Efficiency: Up to 93%

Controller I/O Termination Assembly

Typically 24V DC or 12V DC
Output Type Source 
Load Voltage 15 30 VDC Maximum
On-State Voltage 24 V (typ), load current @ 0.5A
Off-State Leak Current 5.0 µA (max)
Turn-On/Turn-Off Time 10 ms (max)

Processor Board

Type: Dedicated 32-bit 
Clock Speed: 80 MHz
Non-volatile Memory (Flash): 16 MB
RAM: 64 MB
Serial/Fieldbus Ports: CAN 

MB300E Communication Processor

Voltage: 24 V DC
Power Consumption: ≤ 5 W
Serial Ports: RS-232/RS-485
Ethernet Port: 10/100 Mbp
Fieldbus Support: Profibus DP
Processor: 32-bit RISC-based
Flash Memory: 16 MB 
Data Throughput: Up to 10,000 signals

Extension Mounting Panel

Operating Voltage: 24V DC
Current Rating: ~1-5A
Layers: Likely 2-4 layer PCB
Possible RJ45/RS-485

Power Supply Board

AC Input: 85-264V AC
DC Input: 120-370V DC
Frequency: 47-63Hz
Inrush Current: ≤20A
Output Current: 5A
Ripple & Noise: <150mV peak-to-peak
Efficiency: ≥88% 

Drive Control Board

Input Voltage: 24V DC (±10%)
Power Consumption: 15W typical
Analog Inputs:0-10V/4-20mA 
Digital Inputs:24V DC
Processor: 32-bit DSP
Memory: 16MB Flash

Transformer Module

Voltage Input: 100-120V
Current: 0.1A
Voltage: 57.7V
Frequency: 50/60Hz (±5%)
Accuracy Class: 0.5%
Part Number: 1MRK002247-AHR05

Communication Card

Ethernet: 10/100 Mbps 
Input: 24-48V DC
Consumption: 3.5W typical
Isolation: 2.5kV AC
Processor: 32-bit ARM 
Memory:64MB Flash
Digital Inputs:24V DC

Communication Card

Ethernet: 10/100 Mbps
Serial (RS485): 300–115,200 bps
Input Voltage: 24V DC
Power Consumption: 4W
Isolation: 2.5 kV AC 
Processor: 32-bit ARM 
Digital Inputs: 24V DC

CONTROL BOARD

Operating Voltage: 24V DC (±10%)
Power Consumption: ≤10W
Isolation: 1500V AC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz 

CODIRECTIONAL MODULE

Binary Outputs:250V AC
Operating Voltage: 24-48V DC
Voltage polarization:57-120V AC
Current inputs :1A/5A AC
Sensitivity: ≤0.5° phase error

Control Module

Supply Voltage: 24V DC (±10%)
Power Consumption: ≤8W
Isolation: 1500V AC
Digital Inputs:24V DC
Analog Inputs:0–10V or 4–20mA
Relay Outputs: 5A, 250V AC
Processor: 32-bit DSP
PWM Frequency: 2–16 kHz

Processor Unit Relay Card

Operating Voltage: 24V DC
Power Consumption: ≤5W
Isolation: 2.5kV AC 
Processor: 32-bit DSP
Memory:64MB Flash

Processor Unit Relay Card

Operating Voltage: 24V DC
Power Consumption: ≤5W
Isolation: 2.5kV AC 
Processor: 32-bit DSP
Memory:64MB Flash

Drive Power Supply Board

3-phase: 380-480V AC
Frequency: 47-63Hz
Continuous: 150W
Isolation Voltage: 2500V AC
Vibration Resistance: 5-200Hz