ALL MANUFACTURERS

3300 XL 8 mm Probe

3300 XL 8 mm Probe, M10 x 1 thread,without armor
15 1.5 meter (4.9 feet)
02 Miniature coaxial ClickLocconnector, standard cable
05 CSA, ATEX, IECEx  Approvals
Order in increments of 10 mm
Metric thread configurations:
Maximum case length: 250 mm
Minimum case length: 20 mm
Example: 0 6 = 60 mm

3300 XL 8 mm Probe

3300 XL 8 mm Probe, M10 x 1 thread,without armor
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector, standard cable
05 CSA, ATEX, IECEx  Approvals
Order in increments of 10 mm
Metric thread configurations:
Maximum case length: 250 mm
Minimum case length: 20 mm
Example: 0 6 = 60 mm

3300 XL 8 mm Probe

3300 XL 8 mm Probe, M10 x 1 thread,without armor
10 1.0 meter (3.3 feet)
02 Miniature ClickLoc coaxialconnector
05 CSA, ATEX, IECEx  Approvals
Order in increments of 10 mm
Metric thread configurations:
Maximum case length: 250 mm
Minimum case length: 20 mm
Example: 0 6 = 60 mm

330101-00-10-05-02-05 

3300 XL 8 mm Probe,
3/8-24 UNFthread
without armor
05 0.5 meter (1.6 feet)
05 CSA, ATEX, IECEx  Approvals
02 Miniature coaxial ClickLocconnector, standard cable
Order in increments of 0.1 in.
Length configurations:
Maximum unthreaded length: 8.8 in.
Minimum unthreaded length: 0.0 in.
Example: 0 4 = 0.4 in.

Vibration Transmitter

Measurement Range: +/- 50 mils (1.27 mm)
Frequency Range: DC to 10 kHz
Output Signal: 4-20 mA
Power Supply: 24 VDC nominal, 18-32 VDC
Temperature Range: -40°C to +85°C

3300 XL 8 mm Probe

3300 NSv Probe, M10X1 thread, witharmor
Order in increments of 10 mm.
Metric thread configurations:
Maximum length: 250 mm
Minimum length: 20 mm
Example: 06 = 60 mm
Example: 0 4 = 0.4 in.
10 1.0 meter (39 in)
02 Miniature coaxial ClickLoc connector,standard cable
CN Multiple Approvals

3300 XL 8 mm Probe

3300 XL 8 mm Probe, 3/8-24 UNFthread, with armor
Order in increments of 0.1 in.Length configurations:
Maximum unthreaded length: 8.8 in.
Minimum unthreaded length: 0.0 in.
Example: 0 4 = 0.4 in.
10 1.0 meter (3.3 feet)
11 Miniature coaxial ClickLocconnector with connectorprotector, FluidLoc cable
00 Not required

DC Power Supplies

Universal AC Power
High Voltage DC Power Supply
Low Voltage DC Power Supply
Inputvoltage 20 to 30 Vdc
Highvoltage DC 2.5 A (maximum)

System Rack

01 19-inch Rack (14 module slots)
02 Rack Mount Option, Full-Size Rack 
(mounts to19-inch EIA Rack)
01 CSA/NRTL/C (Class 1, Division 2) 
00 None
01 CE
The 3500/05 mini-rack is not available 
in theBulkhead Mount option.

Ethernet/RS232 Modbus I/O Module

Accepts from 1 to 16 signals
Input impedance: Greater than 1 MΩ
Power consumption: 3 watts
Front panel LEDs: OK, TX/RX, Bypass
Type E, J, K, T thermocouples
100 Ω 3-wire and 4-wire platinum RTD

4-Channel Relay Module

Power Consumption:6 watts typical. 
Environmental Sealing:Epoxy-sealed
Arc Suppressor: 250 Vrms, installed as standar
Contact Life:100,000 cycles @ 5 A, 24 Vdc or120 Vac

System Display

Local or Remote Visual Indication 
of 3500 Machinery Protection System
(4) Display Mounting Types
Up to (2) Displays per 3500 Rack
Input Signal: -10 Vdc to +10 Vdc
Power Consumption: 10.5 watts
Ethernet: 100Base-FX Fiber-Optic

Rack Interface Module

Power Consumption:4.75 watts, typical
Standard:RS232 serial communications
Data Rate:38.4 k baud
Normally closed contacts:Arc suppressors are provided
Maximum Current:<1 mA dc, Dry Contact to Common

Proximitor Monitor

Signal :Accepts from 1 to 4 proximitytransducer signals
Power consumption :7.7 Watts, typical
Standard I/O: 10 kΩ
Output Impedance:550 Ω
Transducer Power Supply:-24 Vdc
Gap filter:-3 dB at 0.09 Hz
Smax : 0.125 to 15.8 times runningspeed

VGA Display Monitor

System Event List
Alarm Event List
All module and channel data
3300 style rack view (API-670)
Current alarm data (quick view)
Nine custom display options

Proximitor I/O Module with Internal Terminations

(4) Channel Monitor
Internal terminations 
Dual-level alarms (Alert/Danger) 
Dynamic and static measurement 
Various "Static Value" Parameters
Accepts Input from Proximity Transducers
Proximitor I/O Module with Internal Terminations

Vibration Transmitter

7 0 7.0 metres (23.0 feet)
0 2 Bulkhead screws
0 1 CSA Division 2
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.

Vibration Transmitter

7 0 7.0 metres (23.0 feet)
0 1 35 mm DIN rail clips
0 1 CSA Division 2
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical

Vibration Transmitter

5 0 5.0 metres (16.4 feet)
0 2 Bulkhead screws
0 1 CSA Division 2
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.

Vibration Transmitter

5 0 5.0 metres (16.4 feet)
0 2 Bulkhead screws
0 0 Not required
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.

Vibration Transmitter

5 0 5.0 metres (16.4 feet)
0 1 35 mm DIN rail clips
0 5 CSA Division 2, ATEX Zone 0, 
ATEXZone 2 and includes ABS maritimeapprova
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.

Vibration Transmitter

5 0 5.0 metres (16.4 feet)
0 1 35 mm DIN rail clips
0 1 CSA Division 2
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.

Vibration Transmitter

0 1 35 mm DIN rail clips
CN CSA Division 2, ATEX Zone 0, 
ATEXZone 2 and includes ABS maritimeapproval
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.

Vibration Transmitter

0 4 0-4 mils pp (0-100 μm pp)
5 0 5.0 metres (16.4 feet)
0 1 35 mm DIN rail clips
0 5 CSA Division 2, ATEX Zone 0, 
ATEXZone 2 and includes 
ABS maritimeapproval
Power : Requires +12 to +35 Vdc 
input at the transmitter terminal.
Maximum Loop Resistance : 
1,000 Ω including cable at 35 Vdc.
Current Limiting : 23 mA typical.

Velomitor CT

Sensitivity 3.94 mV/mm/s (100 mV/in/s)±5%.
TemperatureSensitivity-8% to +5%
AmplitudeLinearity±2% to 63.5 mm/s pk 
MountedResonantFrequency9 kHz, minimum 
DynamicOutputImpedance<400 Ω typical
BroadbandNoise Floor 0.229 mm/s (0.009 in/s) pk.
OperatingTemperature-40 °C to +85 °C
StorageTemperature-40 °C to +100 °C
Shock Limit 5000 g pk, maximum.
HumidityLimit100% condensing