Device short name:BMH
Maximum mechanical speed:8000 rpm
Range compatibility:Lexium 32
rated supply voltage:240 V
Continuous stall current:5.55 A
Continuous power:1.68 W
Maximum permanent current:17.84 A
Holding torque:3 N.m holding brake
Torque constant:0.61 N.m/A at 120 °C
Back emf constant:39.3 V/krpm at 120 °C
Range Compatibility:PacDrive 3
Maximum mechanical speed:9000 rpm
Continuous stall current:0.73 A
Continuous power:290 W
Maximum current Irms:2.9 A
Speed feedback resolution:128 periods
Torque constant:0.58 N.m/A 248 °F (120 °C)
Back emf constant:40 V/krpm 68 °F (20 °C)
Power Supply:24VDC
No. of Inputs:(10) 24V dc; (4) fast 24V dc
Input Circuit Type:24 VDC
Output Circuit Type Relay; FET
Relay Contact Rating:24-125VDC; 120-240VAC
Power Supply Usage:82 VA
Input Power:24V DC
Inputs:(10) 24V DC and (4) Fast 24V DC
Type:FT color
Diagonal:10.4" (264 mm)
Resolution:VGA, 640 x 480 pixels
Buffer time:10 min
Variant:Lithium ion
Clock frequency:266 MHz
L1 cache:16 kB
Flash:2 MB (for firmware)
Cooling:Passive via heat sink
Mode/Node switches:2, 16 positions each
Accuracy At 25°C: Typ. 10 ppm (1 second) per day
Controller:SMC
Range of measurement: from 100N to 2kN
Accuracy class: 0.5%
Corrosion resistant
STRAIN AND FORCE SENSOR
TR FORCE TRANSDUCER FOR
MEASURING SPINDLES TENSION
Range Compatibility PacDrive 3
Device short name SH3.....P
Maximum mechanical speed 8000 rpm
rated supply voltage 115...480 V
Continuous stall current 1.8 A
Continuous power 690 W
Maximum current Irms 5.7 A
Speed feedback resolution 128 periods
Series Type:Low-inertia
Voltage Class:400 Volts AC
Frame Size:63 millimeters
Magnetic Stack Length:3 inches
Rated Speed:7000 rpm
Feedback:Multi-turn high-resolution encoder
Shaft Key/Seal:Shaft key/no shaft seal
Brake:24 Volts DC brake
Connector DIN 41612, type F, 48 pin
Supply voltage 24 VDC nominal
Voltage range 20 . . . 32 VDC
Current approx. 200 mA
Reference voltages ± 15 V (± 5 %) Ø 50 mA
Current 0 . . . + 20 mA
Current + 4 . . . + 20 mA
Output voltage 24 V PWM for the solenoid
Dither frequency 100 Hz, 150 Hz, 250 Hz
GENERATOR CONTROLLER
ANALOG INPUT: 0-5 VDC OR 4-20 MA DC
DISCRETE INPUTS (16):
5 MA EACH WHEN CLOSED TO SWITCH COMMON
(TERMINAL 65)
MAXIMUM 80 MA TOTAL
POTENTIAL TRANSFORMER INPUT: 150 VAC MAX
AC: 100-240V AC
Frequency: 50/60 Hz
Output Voltage: 24V DC
Output Current:10-15A
Operating Temperature Range:-20°C to 70°C
Storage Temperature Range:-40°C to 85°C
Conductivity range: 0.001 μS/cm to 2000 mS/cm
Temperature range: -10°C to 110°C (14°F to 230°F)
Analog output: 4-20 mA
Input voltage: 24 V DC
Power consumption: 15 W
Operating Temperature: -10°C to 60°C (14°F to 140°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
CE-compliant, not conformally coated
Redundancy not supported
Input Channels: 8
Input Scan Rate: 32 samples per second
Available Input Types:
Rectangular
Sine Wave
