ALL MANUFACTURERS

Digital I/O Module

Nominal Voltage Options: 
24 VDC, 48 VDC, 125 VDC, or 250 VDC.
Input Voltage Range: ±20% of nominal value
Logic 0 (Low): 0-3 V
Logic 1 (High): 15-250 V 
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)

CONTROL COMMUNICATION GATEWAY

Power Supply: Typically 24V DC
Operating Temperature Range: Typically -40°C to +85°C
Storage Temperature Range: -40°C to +85°C.
Humidity: humidity up to 95% (non-condensing).

TB Option Card

the DC-300 drive
Operating Voltage  24V DC
Operating Temperature Range: -10°C to +60°C
Storage Temperature Range: -20°C to +70°C

CMOS MEMORY BOARD

PC BOARD ASSEMBLY
CMOS MEMORY BOARD
Memory Capacity: 128KB to 1MB
Operating Voltage:operates on +5V DC
Operating Temperature: 0°C to +60°C 
Storage Temperature: Typically -40°C to +85°C.
Humidity: Generally 5% to 95% non-condensing

Terminal Board Relay Card

MCF/ POWER SUPPLY CARD
SPEEDTRONIC / MARK V
MOTOR FIELD CONTROL

Contactor

Contactor Includes 
CR353XAAB 
KIT 90Amp 240/480/600V

Discrete input module

Input voltage 0 to +30VDC,+24VDC nominal
On state voltage +15 to +30VDC
Off state voltage 0 to +5VDC
Off state current 2.0 to 5.5mA0 to 0.5mA
Off response time 0.5ms maximum
Configurable filtertime0 ms, 1.0ms (default), or 7.0ms
Input impedance 10kOhms maximum 

Extended Analog I/O board

Series Speedtronic Mark V
Part Number DS200TCQBG1B
Functional Description RST Extended Analog I/O Board
Functional Acronym TCQB
Used With TCQA Boards

Extended Analog I/O Board

Series: Mark V
Product Type: Analog I/O Board
Proximitor Inputs
LVDT/LVDR Inputs
Two Regulator Milliamp Outputs
LM Vibration Inputs

Safety Controller Board

UCSB CONTROLLER MODULE
256 MB DDR2 SDRAM
600 MHZ INTEL EP8059
28 VDC

Series: Mark VIe
Product Type: Controller Card
Microprocessor: Intel Pentium M Processor 1.6 GHz
Memory: 256 MB
Operating System: QNX Neutrino

Motor Management Relay

non-isolated RS232 port, RS485 port
<200 ms
2000 m (max)
-40°F (-40°C) to +140°F (+60°C)
1 A and 5 A secondary

INPUT MODULE

INPUT MODULE
32POINT
LOGIC
SERIES 90-30
POSITIVE/NEGATIVE
7 AMP MAX
24 VDC

Discrete Input module

Series:Series 90-30
Part Number:IC693MDL752
Product type:Digital I/O
Product Description:Discrete output module
Compatibility:GE Fanuc 90-30 PLCs
No of Channels:Thirty-Two (32)
Output points:32
No. of output groups:Four (4)
Output groups:4
Channels per group:Eight (8)
Maximum inrush current:4.6 A for 20 ms
Output connection:2 x 24-pin connectors

OUTPUT MODULE

Brand:GE Fanuc
Series:Series 90-30
Range:-10 to +10 Volts
Part Number:IC693ALG390
Product Description:Analog Voltage Output
No of Channels:2
External Supply Voltage Range:18 to 30 VDC
External Supply Voltage Ripple:10%
Isolation:1500 Volts RMS field to the logic side
Update Rate:5 ms all channels
Resolution:2.5 mV
Accuracy:+/- 5 mV at 25 degrees Celsius

POWER SUPPLY

IC694PWR321
POWER SUPPLY
120/240 VAC
125 VDC STANDARD

Relay Output module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693MDL930
Product Description:Discrete output module
Product type:Digital I/O
Relay outputs:8
Product Description:Relay Output module
Output switching capacity:4 Amps
5 to 30 volts DC 5 to 250 volts AC, 50/60 Hz
No of Channels:Eight (8)
Minimum load:10 mA
Maximum inrush current:5 Amperes
Response time:15 ms

POWER SUPPLY

IC694PWR331
POWER SUPPLY
24 VDC
HIGH CAPACITY
FOR RX3I

OUTPUT MODULE

OUTPUT MODULE
12/24 VDC
POSITIVE LOGIC
32 POINTS
INTERFACE USES FUJITSU CONNECTOR

printed circuit board

IS200WETAH1ABR2
DISCONTINUED BY MANUFACTURER
printed circuit board 

CPU module

Product type CPU module
Compatibility GE Fanuc 90-70 PLCs
RAM 1 MB
NV-RAM 256 KB
Microprocessor 80486DX4
Clock speed 96 megahertz

INPUT MODULE

Series:VersaMax
Part Number:IC200ALG620
Description:Analog input module
Product Description:4-point RTD / Resistance input module
Resolution:16 bits
Update Rate:210 milliseconds
Compatible RTD Wiring type:3-wire and 4-wire RTDs
Bus Voltage:5 Volts DC
Resistance input range:0-500 Ohms; 0-3000 Ohms
Isolation (Input to Frame):1500 Volts AC
Digital Resolution:15 bits plus sign
Isolation (Input to Logic):250 Volts AC
Frequency:50-60 Hertz
Temperature:0-60 degrees Celsius
Maximum lead resistance:5 ohms per lead

Analog Input Thermocouple Module

Thermocouple types J, K, T, S, R, none (used for mV inputs)
Spans (+/–) 19.5mV, 39mV, 78.125mV, 156.25mV, 312.5mV,625mV
Converter resolution 15 bits + sign
Conformity error +/–0.3 degree Celsius, +/–0.5 degree Fahrenheit.
Normal mode rejection 60dB, at 50/60 Hz, 100% span
Common mode rejection 120 dB at 50/60Hz, 100 ohm imbalance
Common mode voltage 3 VDC maximum

Analog Output module

No. of channels: 4 single-ended, one group
Voltage Range: 18 - 30 VDC
Current Range: 4 - 20 mA
Update Rate: 0.3 ms
LED Indicators: FLD PWR, OK
Power Consumption:   50 mA from +5V bus

Converter Control Board

Converter Control Board
6U SINGLE SLOT VME SINGLE BOARD COMPUTER (SBC)
INTEL ULTRA LOW VOLTAGE CELERON PROCESSOR AT 400 MHZ OR 650 MHZ