PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
200150-09-CN - General-purpose Accelerometer
Bently Nevada 200150-09-CN is a general-purpose case-mounted accelerometer for the documented Trendmaster monitoring architecture. Mounting option 09 supplies a 3/8-24 to 3/4 NPT stud with a 1-1/4-inch hex, while CN identifies the country-specific approval selection.
The ceramic shear element produces a differential acceleration signal with nominal 100 mV/g sensitivity. This 200150 variant has a +/-25 g range and a 10 to 1000 Hz frequency band; the different low-frequency and enveloping limits of 200155 and 200157 must not be copied onto it.
The ceramic shear element produces a differential acceleration signal with nominal 100 mV/g sensitivity. This 200150 variant has a +/-25 g range and a 10 to 1000 Hz frequency band; the different low-frequency and enveloping limits of 200155 and 200157 must not be copied onto it.
BEFORE YOU BUY
Check the complete ordered configuration
ACTUAL APPLICATIONS
Where 200150-09-CN supports measurement tasks
Manufacturer literature supports the following measurement arrangements. Confirm the complete installed system and the exact ordered configuration before selecting this component.
-
01 · DISTRIBUTED MONITORING
Feed a standard ProTIM velocity channel
The manufacturer pairs 200150 with the standard acceleration-to-velocity ProTIM channel. Mount it on a suitable machine casing or bearing housing and confirm that rotor vibration reaches that point. Review the interface settings and frequency response before interpreting the channel. -
02 · LEGACY SYSTEM SUPPORT
Maintain a Trendmaster 2000 measurement point
The 200150 also operates with Trendmaster 2000 and the documented 200100 or 89130-01 interfaces. During replacement, retain the correct sensor type and check the 3/4 NPT mounting adaptation. Similar connectors do not make low-frequency or enveloping variants interchangeable. -
03 · LOCAL MONITORING
Supply a compatible 1900 monitor input
The datasheet identifies compatibility with 1900/25 and 1900/27 monitors. Use the approved interface and wiring to acquire casing acceleration for the designed monitoring function. Confirm the installation location and required signal transmission rather than selecting a point only for accessibility.
Technical specifications for 200150-09-CN
-
Product Model200150-09-CN
-
Product ParametersGeneral-purpose Accelerometer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting stud option09: 3/8-24 to 3/4 NPT; 1-1/4 in hex
-
Approval selectionCN: China-specific approval option; verify supplied certificates
-
Sensitivity at 80 Hz100 mV/g +/-12%
-
Measurement range+/-25 g
-
Frequency range10-1000 Hz, +/-10% relative to 80 Hz
-
Mounted resonant frequencyGreater than 20 kHz
-
Amplitude linearity+/-2% from 1 to 10 g peak
-
Transverse sensitivity7% or less
-
Settling time300 ms or less, within 5% of bias
-
Excitation voltage4.7-5.5 V DC
-
Quiescent currentLess than 800 microamperes
-
Housing and connector material316L stainless steel
View all additional
Alternative Names
200150-09-CN
Bently Nevada 200150-09-CN
General-purpose Accelerometer 200150-09-CN
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the installed measurement arrangement
Bently Nevada 200150-09-CN is a general-purpose case-mounted accelerometer for the documented Trendmaster monitoring architecture. Mounting option 09 supplies a 3/8-24 to 3/4 NPT stud with a 1-1/4-inch hex, while CN identifies the country-specific approval selection.
The ceramic shear element produces a differential acceleration signal with nominal 100 mV/g sensitivity. This 200150 variant has a +/-25 g range and a 10 to 1000 Hz frequency band; the different low-frequency and enveloping limits of 200155 and 200157 must not be copied onto it.
Use the complete manufacturer installation and system instructions. The supplied technical-data extract identifies the documented configuration but is not a substitute for a controlled commissioning procedure.
Features:
- General-purpose 200150 sensing
- 3/4 NPT adapter stud
- Differential acceleration output
The 200150-09-CN requires exact configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete product identity and all selected option fields before accepting a replacement. Do not substitute a similar-looking family without an engineering review.
The ceramic shear element produces a differential acceleration signal with nominal 100 mV/g sensitivity. This 200150 variant has a +/-25 g range and a 10 to 1000 Hz frequency band; the different low-frequency and enveloping limits of 200155 and 200157 must not be copied onto it.
Inspect the supplied nameplate, mechanical fit and connection arrangement. Retain the applicable manufacturer instructions and verify the installed measurement chain before returning it to service.
Features:
- General-purpose 200150 sensing
- Differential acceleration output
- Country-specific CN approval option
The 200150-09-CN requires replacement verification of the complete ordered configuration and installed measurement system before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Bently Nevada 164986 Rev. Y / 108M1756 Rev. AV
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 200150-09-CN is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200150-09-CN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the direction of positive acceleration polarity?
Acceleration from the base toward the connector makes SIG+ positive relative to SIG-. Use this differential polarity when checking the measurement circuit. -
Does the 3/4 NPT dimension describe the thread inside the sensor body?
No. The body has a 3/8-24 female mounting thread. Option 09 is the adapter stud from that interface to 3/4 NPT, with a 1-1/4-inch hex. -
Will the nominal 100 mV/g sensitivity apply without its stated tolerance?
No. The manufacturer specifies +/-12 percent at 80 Hz. Retain that reference and tolerance when checking scaling or comparing the actual calibration information. -
How soon is the 200150 output specified to settle near its bias?
The stated settling time is no more than 300 ms to within 5 percent of bias. Do not substitute the longer settling figure assigned to the 200155 variant. -
Is a hermetic seal a claim that the assembled sensor can be submerged?
No. The environmental specification allows 100 percent relative humidity under condensing, non-submerged conditions. Sealing performance does not remove the non-submerged qualification. -
Can the resonance above 20 kHz be advertised as the usable frequency band?
No. Mounted resonance and usable frequency range are different parameters. For 200150 the documented measurement band is 10 to 1000 Hz within +/-10 percent relative to 80 Hz. -
Where does the manufacturer locate the vibration-to-voltage conversion?
The piezoelectric element generates charge, and the accelerometer electronics convert it to a differential voltage proportional to acceleration along the sensitive axis. This is not an unconditioned charge-output sensor. -
Does choosing the CN option also establish the manufacturing origin?
No. The manufacturer approval guide uses CN as a country-specific certification selection. Country of manufacture is a separate commercial or nameplate fact and must not be inferred from that suffix.
READY TO VERIFY YOUR PART?
Get a 200150-09-CN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
