PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
200151-40-03-02 Four-meter armored accelerometer interface cable
Bently Nevada 200151-40-03-02 is a Four-meter armored accelerometer interface cable in the accelerometer interface cable. The complete order code identifies a 4.0 m blue armored interface cable with connectors on both ends.
The documented configuration also identifies four 22 AWG conductors, nylon coupling nuts and IP67 protection when connected. Match every suffix and any MOD reference with the installed label before replacement, because adjacent ordering codes can represent different mechanical, cable, connector or approval options.
The documented configuration also identifies four 22 AWG conductors, nylon coupling nuts and IP67 protection when connected. Match every suffix and any MOD reference with the installed label before replacement, because adjacent ordering codes can represent different mechanical, cable, connector or approval options.
BEFORE YOU BUY
Confirm the complete 200151-40-03-02 identity
ACTUAL APPLICATIONS
Application context for 200151-40-03-02
The application fields below reflect the documented function of 200151-40-03-02 across compatible industrial environments.
-
01 · POWER GENERATION
Thermal and Hydroelectric Power Production
Thermal generation asset condition monitoring programsHydroelectric production reliability and maintenance operations -
02 · OIL & GAS
Petroleum Production and Gas Processing
Offshore and onshore petroleum production operationsGas compression processing and transmission facilities -
03 · METALS & MINING
Metals Processing and Mineral Production
Steel production and rolling mill operationsMineral processing and extraction plant operations
Technical specifications for 200151-40-03-02
-
Product Model200151-40-03-02
-
Product ParametersFour-meter armored accelerometer interface cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Cable typeAccelerometer interface standard cable
-
Connector arrangementConnectors on both ends
-
Length code40
-
Cable length4.0 m
-
Cable optionBlue cable with armor
-
Coupling nutNylon
-
Conductors4
-
Conductor size22 AWG
-
Shield coverage85% minimum
-
Cable jacketPVC
-
Environmental ratingIP67 when connected
-
Operating temperature-20 to +100 deg C
-
Minimum bend radius63.5 mm
-
Maximum cable length25 m
-
Connector constructionMolded to cable
View all additional
Alternative Names
200151-40-03-02
Bently Nevada 200151-40-03-02
accelerometer interface cable Four-meter armored accelerometer interface cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 200151-40-03-02 four-meter armored accelerometer interface cable
Integrate 200151-40-03-02 only within the compatible accelerometer interface cable. The complete code must agree with the mating sensor chain, mounting arrangement and signal-conditioning hardware.
The decoded build includes a 4.0 m blue armored interface cable with connectors on both ends. Preserve the documented cable and connector routing and keep the measurement chain matched to the installed monitor.
The remaining order information specifies four 22 AWG conductors, nylon coupling nuts and IP67 protection when connected. Apply the family electrical and environmental limits without assigning unresolved wildcard fields a value.
Features:
- Complete order-code configuration retained
- Matched sensing-chain compatibility checked
- Documented electrical limits applied
Integration of 200151-40-03-02 requires the PDF-defined ratings, interfaces, configuration and commissioning checks to be satisfied.
INTERCHANGEABILITY
Verify 200151-40-03-02 four-meter armored accelerometer interface cable
Record the full 200151-40-03-02 label before removal. Compare all option positions, mechanical interfaces, connectors and approval markings with the offered replacement.
Inspect the mating connectors, cable condition and mounting hardware while the channel is isolated. Replace damaged ancillary parts only when they are listed in the quotation.
After installation, verify the expected signal, channel status and physical clearances. A matching base number alone does not confirm a compatible complete configuration.
Features:
- Full installed label captured before removal
- Mechanical and connector options compared
- Channel signal verified after installation
Replacement of 200151-40-03-02 requires the complete PDF-defined identity, electrical values, interfaces and installed configuration to match.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify the official document identity before installation
- Match every order-code position to the supplied item
- Accessories are included only when listed
Documentation for 200151-40-03-02 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 x 25 x 6 cm
-
Shipping weight0.70 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544422900
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200151-40-03-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which complete order code should be quoted for 200151-40-03-02?
Quote 200151-40-03-02 exactly; the complete code fixes the documented cable construction, length and connector arrangement. -
How should maintenance verify 200151-40-03-02 before ordering?
Compare the installed label, cable length, connector type, armor and mating transmitter or sensor family with the official document. -
Can a nearby cable length replace 200151-40-03-02?
Not automatically. Cable length is part of the ordering identity and can affect routing, installation and the matched measurement chain. -
Which photographs help confirm 200151-40-03-02?
Provide the full label, both connectors, cable jacket or armor, routing and the installed mating device. -
Are mating connectors included with 200151-40-03-02?
Only items expressly listed in the written quotation are included; confirm every mating connector, bracket and accessory. -
What should distributors retain on a quotation for 200151-40-03-02?
Retain the full suffix, stated length, cable option, connector construction and the applicable official document reference. -
What should be checked after installing 200151-40-03-02?
Check connector engagement, cable routing, bend radius, shielding continuity and the expected monitored signal before return to service. -
Why is the full suffix important for 200151-40-03-02?
It separates this exact configuration from adjacent family members that may use different lengths, armor, connectors or coupling hardware.
READY TO VERIFY YOUR PART?
Get a 200151-40-03-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
200151-40-03-02Four-meter armored accelerometer interface cableManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
