AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 200350-02-00-00-00
In Stock
Ships by Sunday, August 16
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 200350-02-00-00-00
-
Product Model200350-02-00-00-00
-
Product ParametersAccelerometer
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size5.1x2x2cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Mounting Stud¼-28 to M8 x 1.25 Stainless Steel
-
Tolerance100 mV/g ± 20% (10.2 mV/m/s^2±20%)
-
ApprovalsNo Approvals
-
Output BiasVoltage8 to 12 VDC
-
ExcitationVoltage18 to 28 VDC
-
ConstantCurrentExcitation2 to 20 mA
Description
The Bently Nevada 200350-02-00-00-00 is a general purpose, case-mounted seismic accelerometer for use with the Trendmaster Pro Constant Current Direct Input Card (part number 149811-02) and the Seismic Direct Input Card (part number 149811-04). The 200350-02-00-00-00 is contained within a hermetically sealed, stainless steel case that provides an extremely rugged transducer well suited for harsh industrial environments. The primary application of the 200350-02-00-00-00 is measuring absolute bearing housing, casing, or structural vibration on rotating machinery, where common machine malfunctions such as unbalance and misalignment originate as increases in rotor vibration.
The 200350-02-00-00-00 contains a piezoelectric sensing device that generates charge when subjected to vibration. This charge is then converted electronically to a differential voltage signal, which is proportional to the acceleration that is parallel to the sensitive axis of the 200350. The 200350-02-00-00-00 delivers a sensitivity of 100 mV/g (10.2 mV/m/s²) ±5% with an acceleration range of ±80 g (±784 m/s²) peak, ensuring accurate capture of vibration amplitudes across typical industrial machinery operating conditions.
The 200350-02-00-00-00 contains a piezoelectric sensing device that generates charge when subjected to vibration. This charge is then converted electronically to a differential voltage signal, which is proportional to the acceleration that is parallel to the sensitive axis of the 200350. The 200350-02-00-00-00 delivers a sensitivity of 100 mV/g (10.2 mV/m/s²) ±5% with an acceleration range of ±80 g (±784 m/s²) peak, ensuring accurate capture of vibration amplitudes across typical industrial machinery operating conditions.
Information
Overview
Manuals
Application Notes
Product Applications
Mechanical Insertion & Mounting
Features:
- Hermetically Sealed Stainless Steel Case for Harsh Environments
- Piezoelectric Sensing Element with Differential Voltage Output
- Top-Mounted 2-Pin MIL-C-5015 Connector for Easy Cable Installation
- 1/4-28 Threaded Mounting Hole for Multiple Mounting Stud Options
The 200350-02-00-00-00 is housed in a hermetically sealed stainless steel enclosure rated IP68, making it suitable for harsh industrial environments including 100% relative humidity condensing conditions. The welded hermetic sealing on the 200350-02-00-00-00 ensures long-term durability and protection against moisture and contaminants.
At the core of the 200350-02-00-00-00 is a piezoelectric ceramic sensing element in a shear geometry configuration. When subjected to vibration, this element generates an electrical charge that is electronically converted to a differential voltage signal proportional to the acceleration along the transducer's sensitive axis. The 200350-02-00-00-00 delivers a sensitivity of 100 mV/g ± 20% with an amplitude linearity of ±1%.
The 200350-02-00-00-00 Bently Nevada Accelerometer may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 200350-02-00-00-00 Accelerometer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The frequency response of the 200350-02-00-00-00 spans from 0.5 Hz to 10,000 Hz (±3 dB), with a mounted resonant frequency of 25 kHz. The broadband electrical noise of the 200350-02-00-00-00 is 350 µg over the 1–10 kHz band. The measurement range is ±50 g peak, and the transverse sensitivity is limited to ≤ 7%.
Power requirements for the 200350-02-00-00-00 are 18 to 28 VDC excitation with a constant current of 2 to 20 mA. The output bias voltage of the 200350-02-00-00-00 is 8 to 12 VDC. The settling time is ≤ 2.0 seconds to within 1% of bias. The output impedance is < 150 Ω, and the discharge time constant is ≥ 0.3 seconds. The case of the 200350-02-00-00-00 provides electrical isolation > 10⁸ Ω.
The 200350-02-00-00-00 features a top-mounted 2-pin Mil-C-5015 connector for easy installation and removal of the interconnecting signal cable. The bottom of the housing on the 200350-02-00-00-00 has a 1/4-28 threaded female mounting hole, and the unit is supplied with a ¼-28 to M8 × 1.25 beryllium copper mounting stud. The recommended mounting torque for the 200350-02-00-00-00 is 2 to 5 ft·lb (2.7 to 6.8 N·m).
- Oil & Gas: Monitors compressors, pumps, and gas turbines
- Power Generation: Tracks vibration in steam and hydroelectric turbines
- Industrial Manufacturing: Protects rotating equipment in paper, mining, and water treatment
- Radial Vibration: Monitors bearings, detects rotor imbalance or shaft misalignment
- Axial Thrust: Measures rotor displacement to determine thrust bearing wear
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Surface Preparation: Spot-face a flat surface on the machine housing. The surface must be flat to within 0.001 inches (0.025 mm) with a finish of at least 32 microinches (0.8 μm).
Perpendicular Hole: Drill and tap a hole perpendicular to the machined flat surface to accommodate the M8 thread.Stud Installation: Thread the M8 x 1.25 side of the included Beryllium Copper (BeCu) stud into the machine casing.
Alternative Names
200350-02-00-00-OO
200350-02-00-OO-00
200350-02-OO-00-00
200350-O2-00-00-00
200350-0Z-00-00-00
20035O-02-00-00-00
2OO350-02-00-00-00
200350 02 00 00 00
200350 02 00 00 OO
200350 02 00 OO 00
200350 02 OO 00 00
200350 O2 00 00 00
200350 0Z 00 00 00
20035O 02 00 00 00
2OO350 02 00 00 00
Technical notes
Each 200350 features a top-mounted, 2-pin connector (MIL-C-5015, 5/8-24 UNEF-2A) that allows for easy installation and removal of the interconnecting signal cable. The 200350 also accommodates multiple mounting configurations via a 1/4-28 threaded hole on the bottom of the casing, supporting various mounting studs, adhesive mounting kits, and magnetic base accessories. The compact physical dimensions of the 200350 are 1.65 in [41.9 mm] in height and 0.680 in [17.3 mm] in diameter, with a weight of approximately 2.4 oz .
FAQs
-
What is the 200350-02-00-00?
+The Bently Nevada 200350-02-00-00 is a general-purpose, case-mounted seismic vibration sensor (accelerometer) designed for harsh industrial environments -
What kind of electrical connector does it use?
+The sensor features a top-mounted 2-Pin MIL-C-5015 twist-lock electrical connector. This design allows you to easily connect or disconnect the signal cable during routine machinery maintenance. -
What is the difference between the 200350 and 200355 models?
+Both are seismic transducers, but the 200350 has a sensitivity tolerance of ± 20%, whereas the 200355 has a tighter tolerance of ± 5%. The 200355 also features a lower broadband electrical noise threshold. -
Which monitoring systems are compatible with this accelerometer?
+The 200350 is designed to integrate with the Trendmaster Pro Constant Current Direct Input Card (part number 149811-02) and the Seismic Direct Input Card (part number 164746-01).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
