PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330730-040-12-00 FluidLoc proximity transducer extension cable
Bently Nevada 330730-040-12-00 is a 4.0 m extension cable for the 3300 XL 11 mm proximity transducer system. It connects a compatible proximity probe to a matched Proximitor sensor for shaft vibration and position measurement.
The configuration uses unarmored FluidLoc cable with a connector protector and no agency approval requirement. Its 75 Ω coaxial construction and miniature connectors form part of the calibrated transducer circuit. A 1.0 m probe and this 4.0 m extension cable provide the required 5.0 m system length when used with the matching sensor.
The configuration uses unarmored FluidLoc cable with a connector protector and no agency approval requirement. Its 75 Ω coaxial construction and miniature connectors form part of the calibrated transducer circuit. A 1.0 m probe and this 4.0 m extension cable provide the required 5.0 m system length when used with the matching sensor.
BEFORE YOU BUY
Confirm the complete fluidloc proximity transducer extension cable
ACTUAL APPLICATIONS
Application context for 330730-040-12-00
330730-040-12-00 is a FluidLoc proximity transducer extension cable for compatible machinery-monitoring configurations. Typical fields include power generation, oil and gas processing, and paper production. Suitability depends on the ordered options and installed transducer system.
-
01 · OIL & GAS
Oil Exploration and Natural Gas Production Processing
Petroleum Exploration and ProductionNatural Gas Production Processing -
02 · POWER GENERATION
Thermal and Combined Cycle Electric Power Generation
Thermal Power Generation ProcessesCombined Cycle Electricity Generation -
03 · PULP & PAPER
Pulp Production and Industrial Paper Manufacturing Processes
Industrial Pulp Production ProcessesPaper and Paperboard Manufacturing
Technical specifications for 330730-040-12-00
-
Product Model330730-040-12-00
-
Product ParametersFluidLoc proximity transducer extension cable
-
In stock5 units
-
ManufacturerBently Nevada
-
Cable length4.0 m
-
Cable constructionFluidLoc, without armor
-
Connector protectionConnector protector included
-
Agency approval optionNot required
-
Characteristic impedance75 Ω
-
Center conductor resistance1.0 ±0.25 Ω
-
Coaxial conductor resistance0.3 ±0.1 Ω
-
Cable capacitance69.9 pF/m typical
-
Minimum bend radius25.4 mm
-
Connector maximum torque0.565 N·m
-
Connector materialGold-plated brass
-
Male connector maximum diameter7.2 mm
-
Female connector ferrule diameter8.4 mm
-
Cable outside diameter3.9 mm maximum, FluidLoc
-
Cable length tolerance+20%, -0%
View all additional
Alternative Names
330730-040-12-00
3300 XL 11 mm proximity transducer systems FluidLoc proximity transducer extension cable
XL 11 mm proximity transducer systems 4.0 m cable length
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 330730-040-12-00 fluidloc proximity transducer extension cable
Bently Nevada 330730-040-12-00 is a 4.0 m extension cable for the 3300 XL 11 mm proximity transducer system. It connects a compatible proximity probe to a matched Proximitor sensor for shaft vibration and position measurement.
Verify the cable length (4.0 m), cable construction (FluidLoc, without armor) and connector protection (Connector protector included) against the installed configuration. Keep the documented connections and mechanical clearances.
Use the applicable 3300 XL 11 mm proximity transducer systems instructions to complete mounting and connection. Check the affected vibration or position channel, baseline signal and diagnostic indications before returning the machinery to operation.
Features:
- Cable length: 4.0 m
- Cable construction: FluidLoc, without armor
- Connector protection: Connector protector included
The 330730-040-12-00 fluidloc proximity transducer extension cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 330730-040-12-00 fluidloc proximity transducer extension cable
Match the complete 330730-040-12-00 article and its ordered mechanical and connection options before replacement. The cable length is 4.0 m, and the cable construction is FluidLoc, without armor; another family member may have different options.
Record the existing fluidloc proximity transducer extension cable, routing, mounting position and companion transducer identification before removal. Preserve the channel settings and reference measurements, and follow the machine isolation procedure.
After fitting 330730-040-12-00, restore the documented mounting and connection arrangement. Check the relevant channel response, baseline and alarm configuration, then retain the final inspection and functional-test record.
Features:
- Cable length: 4.0 m
- Cable construction: FluidLoc, without armor
- Connector protection: Connector protector included
The 330730-040-12-00 fluidloc proximity transducer extension cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330730-040-12-00 fluidloc proximity transducer extension cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.14kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544200000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330730-040-12-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the four-metre cable have stainless armor?
Cable construction is FluidLoc, without armor. -
What connector protector is specified by option 12?
Connector protection is Connector protector included. -
What center-conductor resistance is specified for this extension?
Center conductor resistance is 1.0 ±0.25 Ω. -
Which minimum bend radius applies during routing?
Minimum bend radius is 25.4 mm. -
What outside diameter applies to the FluidLoc cable?
Cable outside diameter is 3.9 mm maximum, FluidLoc. -
How much positive length tolerance is permitted?
Cable length tolerance is +20%, -0%. -
What must a purchase request state about FluidLoc construction?
State the complete article code and these ordered options: Cable length: 4.0 m; Cable construction: FluidLoc, without armor; Connector protection: Connector protector included; Agency approval option: Not required; Characteristic impedance: 75 Ω. -
What cable length and connector details should be inspected on arrival?
Compare the complete label and physical options with the purchase order: Cable construction: FluidLoc, without armor; Connector protection: Connector protector included; Agency approval option: Not required; Characteristic impedance: 75 Ω.
READY TO VERIFY YOUR PART?
Get a 330730-040-12-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
330730-040-12-00FluidLoc proximity transducer extension cableManufacturer: Bently NevadaView Details
-
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
