PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
200150 acceleration measurement with option 06 mounting stud
Bently Nevada 200150-06-CN is a general-purpose accelerometer for the documented Trendmaster monitoring architecture. The 200150 variant provides acceleration input for the standard ProTIM acceleration-to-velocity application, while option 06 specifies the threaded mounting-stud configuration used to attach the sensor.
Install the accelerometer on a suitable bearing housing or casing so machine vibration is transmitted correctly to the sensor. Confirm the ProTIM type, mounting surface, interface cable and actual approval marking. Low-frequency and enveloping accelerometers are different variants, not automatically interchangeable substitutes.
Install the accelerometer on a suitable bearing housing or casing so machine vibration is transmitted correctly to the sensor. Confirm the ProTIM type, mounting surface, interface cable and actual approval marking. Low-frequency and enveloping accelerometers are different variants, not automatically interchangeable substitutes.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 200150-06-CN
These are applications documented for the applicable manufacturer series. They do not establish installation of this exact order in a named customer project.
-
01 · BEARING HOUSINGS
General-purpose machinery vibration measurement
The 200150 accelerometer senses vibration transmitted through a bearing housing to its mounting point. In the documented standard ProTIM arrangement, the acceleration signal is used for acceleration-to-velocity monitoring; mounting quality determines whether the measured signal represents the machinery condition. -
02 · MACHINE CASINGS
Casing vibration in plant monitoring routes
For a suitable casing measurement point, the sensor supplies an electrical acceleration signal to the compatible Trendmaster interface. The option 06 stud must match the prepared connection, and the housing vibration path must be assessed before choosing the measurement location. -
03 · CONDITION MONITORING
Standard ProTIM acceleration-to-velocity channels
This variant is intended for the standard acceleration-to-velocity application rather than the separate low-frequency or enveloping applications. Confirm the ProTIM configuration and cable route when maintaining an existing plant monitoring channel; a shared connector alone does not establish sensor compatibility.
Technical specifications for 200150-06-CN
-
Product Model200150-06-CN
-
Product ParametersGeneral-purpose industrial accelerometer
-
In stock1 unit
-
ManufacturerBently Nevada
-
Sensitivity100 mV/g, +/-12% at 80 Hz
-
Measurement range+/-25 g
-
Frequency range10 to 1000 Hz, +/-10% relative to 80 Hz
-
Resonant frequencyGreater than 20 kHz
-
Amplitude nonlinearity+/-2% from 1 to 10 g peak
-
Transverse sensitivity7% or less
-
Settling time300 ms or less
-
Excitation voltage4.7 to 5.5 V DC
-
Quiescent currentLess than 800 microamperes
-
Output bias2.5 V DC, +/-0.23 V
-
Operating temperature-40 to +105 degrees C
-
Mounting stud option06: 3/8-24 to 1/4 NPT, 3/4-inch hex
-
Maximum interface cable length25 m for 200150
-
Sensor constructionShear ceramic element; 316L stainless steel case
-
Electrical connectorFive-pin, 1/2-20 top connector
View all additional
Alternative Names
Bently Nevada 200150-06-CN accelerometer
200150 general-purpose vibration accelerometer
200150 option 06 NPT stud sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
200150, 200155 AND 200157 ACCELEROMETERS
Integrate the complete accelerometer configuration
200150 is the general-purpose accelerometer variant identified for the standard ProTIM acceleration-to-velocity application. It must be used with the documented monitoring interface and wiring; it is not a generic interchangeable substitute for all sensors in the family.
Confirm the five-pin connection, 4.7 to 5.5 V DC excitation and the correct interface cable. The maximum documented cable length for 200150 is 25 m, not the 15.24 m limit associated with 200155.
Option 06 specifies a 3/8-24 to 1/4 NPT mounting stud. Prepare a suitable bearing-housing or casing location, then apply the separate sensor and stud mounting requirements. Verify the CN approval marking on the supplied item.
Features:
- Use the correct standard ProTIM application
- 200150 cable length limit: 25 m
- Check mounting path and actual approval marking
The Bently Nevada 200150-06-CN accelerometer requires the associated hardware, mounting and measurement configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 200150-06-CN order, including the general-purpose sensor variant, mounting stud and approval requirement. A similar family number or matching connector does not establish interchangeability.
The manufacturer assigns 200155 to low-frequency measurements and 200157 to enveloping measurements using different ProTIM applications. Substituting these variants without the appropriate system changes can produce incorrect readings.
The reviewed official sources do not establish an exact-order discontinuation date, hardware revision or approved successor. A replacement mounting stud is an accessory, not a successor accelerometer. Confirm current manufacturer guidance before substitution.
Features:
- Match sensor variant, stud and approval
- Do not substitute low-frequency or enveloping variants blindly
- Verify accessories separately from sensor identity
The Bently Nevada 200150-06-CN accelerometer requires replacement verification against the complete installed configuration and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation. The existing Data Sheet and Installation Instructions incorrectly state a 15.24 m cable limit. The official 200150 limit is 25 m; corrected PDFs are pending review.
Features:
- Existing PDF references retained; verify document applicability before installation
- Match manufacturer document scope to the complete order and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 200150-06-CN accelerometer must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090 (China reference)
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200150-06-CN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which ProTIM application is intended for 200150?
The manufacturer identifies 200150 for the standard ProTIM acceleration-to-velocity application, option -01. Check the installed monitoring configuration before connecting the sensor. -
What mounting stud is specified by option 06?
Option 06 is a 3/8-24 to 1/4 NPT mounting stud with a 3/4-inch hex. Verify the machine mounting connection before installation. -
Is the maximum interface cable length 15.24 metres?
Not for this variant. The documented maximum is 25 metres for 200150; the shorter 15.24-metre limit stated elsewhere applies to 200155. -
Can 200155 or 200157 directly replace 200150?
Do not treat them as direct equivalents. They serve different ProTIM applications, and the manufacturer warns that inappropriate substitution can produce incorrect readings. -
What power does the accelerometer require?
The specified excitation is 4.7 to 5.5 V DC with quiescent current below 800 microamperes. Use the documented interface and wiring rather than a generic industrial power connection. -
Where should the sensor be mounted for useful vibration readings?
Mount on an appropriate bearing housing or casing with a suitable vibration transmission path. Incorrect positioning can attenuate or amplify the measured vibration. -
Does CN identify the country where the sensor was manufactured?
No. CN is a country-specific approval option. The actual country of manufacture must be established independently from official product or shipment evidence. -
Are the sensor and stud tightening torques identical?
No. The sensor mounting torque is 2.7 to 6.8 N m. The option 06 stud has separately documented torque requirements; do not apply the stud torque to the sensor body.
READY TO VERIFY YOUR PART?
Get a 200150-06-CN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
