PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330101-65-96-10-02-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Unarmored imperial proximity probe
Bently Nevada 330101-65-96-10-02-00 is a standard mount 3300 XL 8 mm proximity probe with a 9.6 inch case and 6.5 inch unthreaded section. Its one meter lead uses standard cable and a ClickLoc connector, without protective armor.
This configuration is a probe component for a matched proximity measurement system, not an independent transmitter. The long case requires a mounting check against the machine drawing. Select the appropriate electrical length and protect the connection; the final option does not request agency approvals.
This configuration is a probe component for a matched proximity measurement system, not an independent transmitter. The long case requires a mounting check against the machine drawing. Select the appropriate electrical length and protect the connection; the final option does not request agency approvals.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Documented probe application roles
The applications below describe the compatible manufacturer series. They do not establish installation of this exact order in a named factory or project.
-
01 · VIBRATION
Shaft movement at bearing locations
Within the matched 3300 XL 8 mm system, this 1.0 meter probe senses dynamic shaft movement on fluid-film bearing machinery. Its 9.6 inch case must fit the measurement location; these are series applications, not evidence of a named project installation. -
02 · POSITION
Static position measurement channels
The compatible system measures static distance from the probe tip to a conductive target. For this order, verify the 6.5 inch unthreaded section and 9.6 inch case against the mounting drawing before configuring the position channel. -
03 · ROTATIONAL REFERENCE
Keyphasor reference measurements
The documented series supports Keyphasor reference and speed measurements from a suitable target. Match this 1.0 meter standard probe to the correct sensor and electrical length, and consult the manufacturer application note for tachometer or overspeed use.
Technical specifications for 330101-65-96-10-02-00
-
Product Model330101-65-96-10-02-00
-
Spare Model330101
-
Product ParametersUnarmored imperial proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread3/8-24 UNF-2A
-
Unthreaded length6.5 in
-
Overall case length9.6 in
-
Nominal total probe length1.0 m
-
Lead protectionWithout armor
-
Connector and cableClickLoc; standard cable; no protector
-
Agency approval option00: not required
-
Probe tip diameter8.0 mm
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Nominal probe DC resistance7.59 ohms, +/-0.50; center to outer
View all additional
Alternative Names
330101 65 96 10 02 00
330101-65-96-10-02-00 3300 XL 8 mm probe
Bently Nevada 330101-65-96-10-02-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
UNARMORED IMPERIAL PROXIMITY PROBE
Integrating 330101-65-96-10-02-00
Bently Nevada 330101-65-96-10-02-00 is a standard mount 3300 XL 8 mm proximity probe with a 9.6 inch case and 6.5 inch unthreaded section. Its one meter lead uses standard cable and a ClickLoc connector, without protective armor.
This configuration is a probe component for a matched proximity measurement system, not an independent transmitter. The long case requires a mounting check against the machine drawing. Select the appropriate electrical length and protect the connection; the final option does not request agency approvals.
This configuration uses a 9.6 inch case, 6.5 inch unthreaded section and 1.0 meter probe length. The unarmored lead and unprotected connector require suitable routing and connection protection.
Features:
- Match the 3300 XL 8 mm system
- Respect the specified mounting geometry
- Verify target and connector conditions
The 330101-65-96-10-02-00 unarmored imperial proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the complete 330101-65-96-10-02-00 ordering code with the installed probe. Case length, unthreaded length, cable length, armor, connector option and approval selection must all match the documented installation.
The manufacturer permits specified interchangeability with non-XL 3300 five and eight millimeter components, but mixing XL and non-XL components limits performance to the non-XL specification. Mechanical fit and total electrical length remain essential.
No exact-order discontinuation date, hardware revision or designated successor was established in the reviewed manufacturer documentation. Datasheet revision AM is a publication revision, not a probe hardware revision or proof of a replacement designation.
Features:
- Compare complete options before replacement
- Check qualified family interchangeability
- Do not infer a successor from appearance
The 330101-65-96-10-02-00 unarmored imperial proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330101-65-96-10-02-00 unarmored imperial proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size1.5x1.3x116 cm
-
Shipping weight0.05 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330101-65-96-10-02-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What makes the 65-96 case configuration different?
It specifies 6.5 inches of unthreaded length and a 9.6 inch overall case, the maximum case length in this ordering table. Check the machine mounting depth rather than substituting a shorter probe. -
Does suffix 00 certify installation in an explosive atmosphere?
No. The agency approval option 00 means approvals are not required in the order. A hazardous area installation must not be justified using an approval from another configured part. -
Is the lead armored on 330101-65-96-10-02-00?
No. Base number 330101 identifies the version without armor. The armored imperial standard mount family has base number 330102 and is a separate ordering identity. -
Which resistance is specified for a one meter probe?
The nominal center-to-outer conductor probe resistance is 7.59 ohms, with a tolerance of plus or minus 0.50 ohm. This probe value is different from extension-cable core resistance. -
Can a non-XL sensor be mixed with this XL probe?
The manufacturer documents specific interchangeability with non-XL 3300 five and eight millimeter components, but mixed systems are limited to non-XL performance. Confirm the complete compatible chain and installation. -
Does a different target metal require consideration?
Yes. Published system accuracy and interchangeability are based on an AISI 4140 steel target under stated conditions. Those specifications do not automatically apply to a system calibrated for another target material.
READY TO VERIFY YOUR PART?
Get a 330101-65-96-10-02-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
